Prices for Whirlpool washing machine control boards vary by model, type, and source. The typical cost to replace a control board includes the board itself plus labor, diagnostic time, and possible shipping or disposal fees. This article breaks down the cost and provides practical price ranges to help buyers budget accurately for a Whirlpool control board replacement.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Control board (new OEM) | $100 | $180 | $260 | Model-dependent pricing |
| Control board (refurbished) | $40 | $70 | $110 | Lower upfront cost |
| Control board (aftermarket) | $60 | $120 | $180 | Third-party options |
| Labor for installation | $75 | $150 | $225 | Typical range for in-home service |
| Diagnostics & trip fee | $40 | $70 | $100 | May be waived with repair |
| Shipping for part | $0 | $8 | $25 | Depends on vendor and speed |
| Total project price (in-home) | $215 | $315 | $585 | Assumes labor plus standard part |
Whirlpool Control Board Price Range by Model Type
Typical control boards for Whirlpool washers span OEM, refurbished, and aftermarket options, with OEM boards usually costing more but offering guaranteed compatibility. The low range covers refurbished or aftermarket boards, while the high range reflects new OEM boards for newer or premium models. Assumptions: standard residential unit, 120V service, normal access, no hidden damage.
Major Cost Components in a Control Board Replacement
The quote generally breaks down into four to six parts: board cost, labor, diagnostics, shipping, disposal, and any needed kits or adapters. The table below shows common components and typical ranges.
| Component | Low | Average | High | Notes |
|---|---|---|---|---|
| Board | $40 | $110 | $260 | OEM vs aftermarket |
| Labor | $75 | $150 | $225 | In-home installation |
| Diagnostics | $40 | $70 | $100 | Time for fault confirmation |
| Shipping | $0 | $8 | $25 | Speed vs cost |
| Disposal/Refresh | $0 | $10 | $25 | Old part removal |
| Warranty extension (optional) | $0 | $20 | $60 | Length varies |
Variables Driving Whirlpool Control Board Quotes
The final price can swing based on board type and model compatibility and service location and access. For instance, newer 800-series models tend to carry higher OEM pricing, and regions with higher labor rates add to the total. Assumptions: standard installation, single unit, no ceiling or attic access issues.
Regional Price Differences for Whirlpool Controllers Across the U.S.
Prices in coastal California and the Northeast typically exceed the national average due to labor costs and service call fees. Midwest and Southern markets often land closer to the average range. A practical spread is about 10% to 25% across regions, depending on urgency and distributor availability. Regional delta matters when comparing quotes.
Per-Unit Pricing by Board Type
Per-unit pricing varies by board class and condition. OEM boards often run $100-$260, refurbished boards are commonly $40-$110, and aftermarket replacements span about $60-$180. Buyers should match the board to the model’s exact number to avoid compatibility issues.
Labor Time, Crew Size, And Scheduling Impact
Typical in-home replacement takes 1.5 to 3 hours for a single unit on a standard front-load or top-load washer. A two-person crew accelerates the job but may add scheduling costs; a single technician is common. Scheduling limitations and on-site accessibility strongly influence total cost.
Warranty, Aftercare, And Hidden Costs
Many quotes include a 90-day to 1-year labor or component warranty, with longer coverage offering a higher price. Consider if delivery, installation, or diagnostic fees are bundled or billed separately. Warranty terms impact long-term ownership cost.
Practical Ways To Reduce Whirlpool Control Board Costs
Cost-conscious choices include selecting a refurbished or aftermarket board when compatibility is confirmed, avoiding expedited shipping fees, and bundling the job with related repairs to reduce service visits. Scope control and timing are the most effective levers.
Cost-Saving Scenarios And Real-World Examples
Scenario A: A standard 6- to 8-year-old Whirlpool top-load with a faulty control board; replace with a refurbished board and standard labor equals about $120-$190 for the part plus $100-$180 for labor. Scenario B: A newer high-end model requiring OEM board and diagnostic time; total could reach $260-$585 depending on model and region.
Durability, Compatibility, And Next Steps
Before purchasing a board, verify the exact model number, serial, and any required adapters. After installation, run a full cycle to confirm proper function. Correct model matching reduces the risk of resale or warranty issues.