White Fantasy granite typically costs $55-$110 per square foot installed, with a common project total of $2,200-$5,500 for a 40- to 50-square-foot kitchen countertop. Slab grade, countertop size, edge details, sink cutouts, removal, and local labor rates have the largest effect on the final quote.
The stone’s veining and color can vary between bundles, so buyers should confirm the actual slab before fabrication and compare quotes that include the same work.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Installed countertop | $55 per sq ft | $80 per sq ft | $110 per sq ft | Stone, fabrication, and standard installation |
| Material only | $25 per sq ft | $40 per sq ft | $65 per sq ft | Varies by slab grade and supplier |
| Typical kitchen project | $1,900 | $3,600 | $6,000 | About 35-55 sq ft, before unusual repairs |
| Removal and disposal | $200 | $450 | $900 | Depends on existing material and access |
What White Fantasy granite costs for a kitchen
For standard 3-centimeter slabs and a straightforward kitchen layout, White Fantasy granite commonly runs $55-$110 per square foot installed. A 40-square-foot countertop may total about $2,200-$4,400, while a larger 55-square-foot layout can reach $3,000-$6,050. National averages are only planning figures; metropolitan labor markets and stone availability can move a quote substantially.
Material-only pricing is often $25-$65 per square foot, but shops may quote stone by the slab rather than by the installed area. A slab can leave unusable offcuts, especially when the countertop has an island or long runs that require careful vein alignment. Ask how the supplier calculates slab yield and whether remnants remain the customer’s property.
A practical starting budget is $80 per square foot installed, plus removal or unusual layout charges.
Assumptions: 3-centimeter stone, standard eased edge, ordinary sink cutout, accessible kitchen, and mid-range U.S. labor rates.
How slab, fabrication, and labor shape the quote
Installed prices combine the stone with measuring, cutting, finishing, delivery, and setting. One contractor’s “installed” rate may include a sink cutout and basic edge while another lists those as separate charges. A written, itemized estimate makes the comparison more useful than a single per-square-foot number.
| Quote component | Typical price | What changes the charge | Common unit |
|---|---|---|---|
| White Fantasy slab | $25-$65 | Grade, thickness, origin, and usable yield | Per sq ft of material |
| Fabrication and edge | $15-$35 | Cut complexity, finish, and edge profile | Per sq ft or linear ft |
| Installation labor | $10-$25 | Carry distance, stairs, seams, and crew size | Per sq ft or project |
| Sink and cooktop cuts | $150-$450 | Number and type of openings | Per cutout |
| Delivery and disposal | $100-$500 | Distance, access, and old-counter removal | Per job |
A standard eased edge may be included or cost about $10-$20 per linear foot if itemized. More elaborate ogee or laminated edges can add $20-$45 per linear foot. A backsplash made from the same stone commonly adds $15-$35 per square foot, excluding special outlet cuts or unusually high sections.
Labor usually accounts for a meaningful share of the quote, so compare the listed fabrication and installation tasks—not just the slab rate.
Which slab grades, thicknesses, and layouts raise the price?
White Fantasy is a natural stone sold under a commercial name, and appearance is not perfectly uniform. Premium bundles with a preferred white background, dramatic movement, or fewer visible imperfections may cost $10-$25 more per square foot than ordinary inventory. Color and veining can differ even among slabs from the same supplier, making selection important for a large island or matching backsplash.
Thickness and construction affect both material and labor. A 2-centimeter slab can be less expensive than 3-centimeter stone, but may need a built-up edge or additional support depending on the cabinet layout. A mitered or laminated edge commonly adds $20-$45 per linear foot. Large overhangs, unsupported spans, and waterfall sides can require extra stone, reinforcement, and careful handling.
Layout is a major yield driver. A basic L-shaped counter with a few straight cuts may fit efficiently on a slab. A 10-foot island, multiple separate runs, or book-matched patterns can increase waste and require an additional slab. Seams are also harder to place discreetly when the veining is prominent.
Measure total countertop area, longest run, island dimensions, and exposed edges before treating a per-square-foot quote as a firm total.
Cutouts and site conditions add another layer. A single standard undermount sink opening may be included, but a second sink, cooktop, soap dispenser, or tight-radius corner can incur separate fabrication fees. Cabinets that are out of level, narrow stairways, or a long carry from truck to kitchen may require added labor or a larger crew.
Where can a homeowner trim the granite budget?
Keep the design simple where the visual effect is minor. A straight eased edge, standard sink opening, and ordinary backsplash height are usually cheaper than decorative edges, extra cutouts, and full-height stone. Reducing a large overhang or eliminating a waterfall panel can save material and fabrication time without changing the main countertop surface.
Ask the fabricator to quote both available slab grades and show actual inventory. A less expensive bundle may meet the project’s color preference, but buyers should inspect the entire slab in person or through clear, current photos. Confirm that the selected slab is reserved and that the final template will be cut from that material, not a later substitute.
Get at least three itemized quotes using identical measurements and inclusions. Compare edge length, backsplash area, cutouts, removal, delivery, sink installation, sealing, and tax. A low per-square-foot offer can become more expensive once these charges are added. Ask whether remnants can be used for a small vanity or other surface, but do not purchase extra stone solely to use leftover material.
The most reliable savings come from controlling slab yield and optional fabrication, not skipping accurate measurement or proper support.
Where the existing cabinets are sound and level, keeping them avoids a separate replacement expense. If cabinets need repair, confirm their condition before stone is fabricated; correcting a weak base after templating can cause delays or refitting costs. Avoid paying for upgrades that do not match the intended use, and get any change to the agreed scope in writing.
How do White Fantasy granite prices vary by region?
Stone and labor costs differ across the country. As a rough comparison, a quote in a high-cost coastal metro can run 10%-25% above a mid-sized Midwest or Southern market. Smaller towns may have lower labor rates, but limited local inventory and longer delivery routes can offset part of the savings. These are planning differences, not fixed regional tariffs.
Urban shops may have more slab choices and fabrication competition, while rural buyers may pay a delivery or travel charge of $100-$400. A supplier that must bring in a particular bundle can also pass through freight or handling charges. Ask whether the quote uses stock already at a local warehouse or includes a special order.
Seasonal demand is less predictable than regional labor. Contractor schedules can tighten during busy remodeling periods, and rush fabrication may add $200-$600 when a shop rearranges production or delivery. Scheduling around the fabricator’s normal lead time may prevent that charge, but availability depends on the selected slab and local workload.
Compare at least two local fabricators and one nearby market only after accounting for delivery, travel, and slab selection.
How much time do templating and installation add?
A typical countertop replacement involves a measurement visit, fabrication, and an installation appointment. Templating often takes 1-2 hours on site, while fabrication commonly takes 5-10 business days after the template is approved. Installation usually requires 4-8 hours for a standard kitchen, depending on the number of pieces, seams, and access conditions.
Labor may be priced within the installed rate or separated into a project charge. If listed hourly, countertop-related labor rates can fall around $50-$100 per worker-hour, but many shops use a fixed project price instead. A two- or three-person crew may be needed to carry and set heavy slabs safely; stairs and long carries can increase the minimum crew time.
Removal of existing counters can take 2-5 hours and cost $200-$900, depending on material, attachment method, and disposal. Tile or stone removal is usually more involved than lifting a simple laminate top. Plumbing reconnection may be excluded, so confirm whether the installer handles sinks and faucets or whether a plumber must be scheduled separately.
Clarify the order of templating, cabinet readiness, removal, installation, and plumbing before accepting a promised completion date.
How does White Fantasy compare with quartz and other stone?
White Fantasy can provide natural veining at a price similar to many mid-range granite or quartzite options, but supplier classification and composition can vary. Because the trade name does not always identify the same stone characteristics, ask the seller what the specific slab is and what care it needs. A sample is useful for color, but it cannot represent every vein across a full slab.
| Countertop option | Installed range | Price distinction | Budget note |
|---|---|---|---|
| White Fantasy granite | $55-$110 per sq ft | Natural slab and fabrication variation | Inspect the actual slab and confirm care advice |
| Entry-level granite | $45-$80 per sq ft | Often lower-cost inventory | May offer fewer color or vein patterns |
| Engineered quartz | $60-$120 per sq ft | Brand, color, and edge affect price | Compare full installed scope and warranty |
| Premium quartzite | $75-$150 per sq ft | Slab grade and fabrication can be higher | Some dramatic patterns require more matching |
Replacing a damaged section may be cheaper than a full new countertop only when a close match and practical seam are possible. Natural stone varies, and older material may be unavailable. A small repair can cost $200-$800, depending on chips, cracks, access, and polishing; a replacement section may require templating and could still look different from adjoining pieces.
Compare alternatives by installed price, appearance, maintenance instructions, and replacement risk rather than material cost alone.
What three kitchen quotes might include
These examples use approximate installed pricing and represent ordinary U.S. projects rather than guaranteed offers. Actual totals depend on the selected slab, cabinet condition, local rates, tax, and whether quoted square footage includes backsplash. All examples assume standard access and no major plumbing or cabinet work.
| Project example | Scope and rate | Likely total |
|---|---|---|
| Small galley kitchen | 30 sq ft at $70-$90 per sq ft; one sink cutout; basic edge | $2,100-$2,700 |
| Typical L-shaped kitchen | 42 sq ft at $75-$100 per sq ft; sink cutout; removal and disposal at $250-$500 | $3,400-$4,700 |
| Kitchen with large island | 58 sq ft at $85-$110 per sq ft; premium slab selection; extra edge and island handling | $5,200-$7,400 |
The small galley estimate assumes an efficient layout with limited waste. The typical kitchen figure includes a modest removal allowance but not cabinet repairs or new plumbing. The island example allows for a more expensive slab or complicated handling; a second slab or waterfall panel could push the total above the range.
When a quote falls well below these examples, check that the supplier has included measurement, fabrication, installation, cutouts, delivery, and taxes. A quote above them may be reasonable if it includes premium stone, extensive backsplash, several edge treatments, or difficult access.
Ask every fabricator to list the slab, measured area, edge footage, cutouts, removal, delivery, and exclusions on the same estimate.