White Galaxy granite typically costs $60-$120 per square foot installed, with many U.S. kitchen projects landing near $85 per square foot. Slab grade, countertop size, fabrication, sink cutouts, removal, and local labor rates are the main factors that change the quote.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Installed countertop | $60/sq ft | $85/sq ft | $120/sq ft | Material, standard fabrication, and installation |
| Typical 35-sq-ft kitchen | $2,100 | $2,975 | $4,200 | Before unusual removal or structural work |
| Granite material only | $35/sq ft | $50/sq ft | $75/sq ft | Varies with slab selection and supplier |
Assumptions: Standard 3-cm slabs, ordinary access, and professional installation; prices vary by market and fabricator.
What White Galaxy Granite Costs for a Typical Kitchen
For a straightforward kitchen with 30-40 square feet of counter space, a reasonable installed budget is about $1,800-$4,800, with roughly $3,000 common for standard selections and uncomplicated layouts. A small bathroom vanity may cost $400-$1,200, though fabricators often set minimum job charges that make small projects more expensive per square foot.
Most installed quotes combine the stone, templating, fabrication, delivery, and fitting. The estimate may exclude tax, old-countertop removal, plumbing reconnection, backsplash work, and repairs to cabinets or walls. Confirm whether the quoted area is measured before or after the sink and cooktop openings are deducted; shops often charge by slab use or project scope rather than net countertop area alone.
How Slab, Fabrication, and Installation Shape the Quote
Stone is only one portion of the installed price. Fabrication includes measuring, cutting, polishing exposed edges, and making openings; installation covers transport, placement, joining seams, and securing the tops. The table shows typical quote components for an ordinary kitchen rather than guaranteed national rates.
| Quote component | Typical range | Common pricing basis | What changes it |
|---|---|---|---|
| Granite slab | $35-$75/sq ft | Material area or slab | Pattern, thickness, availability |
| Fabrication and templating | $15-$35/sq ft | Project or square foot | Cutouts, seams, edge profile |
| Installation labor | $10-$25/sq ft | Area or crew charge | Access, weight, layout |
| Delivery and disposal | $100-$500 | Trip and removal fees | Distance, stairs, old tops |
| Sink or cooktop cutout | $150-$400 each | Per opening | Shape and finish requirements |
Ask for a written breakdown separating stone, fabrication, installation, and extras. Some companies bundle these charges into one installed rate, so comparing quotes is easiest when each contractor confirms the same square footage, edge, cutouts, and removal scope.
Which Slab Size and Edge Details Raise the Price
Countertop area and slab yield have a direct effect on material spending. A 25-sq-ft run may fit a different slab plan than a 50-sq-ft kitchen with an island, and a layout that requires a second slab can raise the bill substantially. Islands wider than about 36 inches may also need extra support, depending on overhang and cabinet construction.
Complex layouts can cost more even when the finished surface area changes only slightly. A standard eased edge is commonly included, while decorative edges may add about $10-$30 per linear foot. Extra-long runs, tight corners, book-matched patterns, or visible seams can require more shop time and material. Ask whether the quote prices a whole slab, a remnant, or a measured share of slab usage.
How Local Labor Rates Shift White Galaxy Granite Pricing
Labor and operating costs differ across the country. Quotes in major coastal metros may run 10%-25% above a comparable project in a lower-cost market, while rural areas can have higher delivery charges or fewer fabricators. These are useful planning adjustments, not fixed regional price rules; local stone supply and competition can offset labor differences.
Installation complexity often matters as much as the hourly rate. A typical kitchen may require a templating visit and a two- or three-person installation crew for several hours, plus shop fabrication time. Stairs, narrow hallways, long carry distances, and limited parking can increase handling charges. Request confirmation that templating and installation are included, and ask whether the crew charges separately for difficult access.
What Removal, Sink Cutouts, and Seams Add
Removing existing countertops commonly adds $5-$15 per square foot, or a project minimum of roughly $150-$500. Disposal may be included or billed separately. Plumbing disconnection and reconnection can add $150-$400 when a plumber is needed; electrical changes are separate. New sinks, faucets, or cooktops are usually not part of the stone price unless listed explicitly.
Cutouts and finish work are frequent sources of quote differences. A sink opening may cost $150-$300, while a cooktop cutout often runs $150-$400, depending on dimensions and edge finishing. A backsplash made from matching granite can add about $15-$35 per linear foot for material and fabrication, before unusual wall preparation. Ask how many seams are expected and whether seam placement is included in the installation price.
Three White Galaxy Countertop Quotes by Kitchen Size
These examples use installed planning rates, standard 3-cm material, and ordinary access. Actual fabrication prices depend on the slab layout and local shop charges. Extras such as demolition, premium edges, taxes, and plumbing can push a project above the estimates.
| Project | Size and scope | Planning rate | Estimated total |
|---|---|---|---|
| Small galley kitchen | 25 sq ft, one sink cutout | $70-$95/sq ft | $1,900-$2,800 |
| Typical kitchen | 35 sq ft, sink and cooktop | $75-$105/sq ft | $2,925-$4,475 |
| Kitchen with island | 50 sq ft, extra seams or slab use | $90-$120/sq ft | $4,500-$6,500 |
Use the examples as comparison points, not fixed bids. For instance, a 35-sq-ft quote near $3,500 works out to $100 per square foot; it may be reasonable if it includes both cutouts, delivery, templating, and installation. Compare the scope before treating a lower total as a better price.
Can White Galaxy Granite Be Cheaper Without Downgrading
Keeping the existing countertop until installation day, choosing a standard edge, and minimizing unusual cutouts can reduce labor and fabrication charges. If the project is small, ask whether a suitable remnant is available; remnant pricing can lower material expense, but the piece must fit the layout and may not match a later addition.
Get at least three itemized quotes using the same measurements and specifications. Compare the actual slab selection, thickness, edge, cutout count, removal, delivery, and warranty rather than just the per-square-foot figure. Avoid paying for a second slab or premium profile unless the layout requires it, and check whether sales tax or a minimum fabrication charge is added after the advertised rate.