Wilsonart quartz pricing depends on the color’s price group, slab requirements, fabrication, and installation. A typical installed project costs about $55-$120 per square foot, with many standard kitchens landing near $70-$90 per square foot; Wilsonart does not publish one universal installed price for every group or dealer.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Installed Wilsonart quartz | $55/sq ft | $80/sq ft | $120/sq ft | Material, fabrication, and installation; project minimums may apply |
| Quartz material allowance | $25/sq ft | $40/sq ft | $60/sq ft | Planning estimate, not an official Wilsonart group price list |
| Typical 40-sq-ft kitchen | $2,200 | $3,200 | $4,800 | Before unusual removal, plumbing, or structural work |
What Wilsonart quartz price groups mean for a kitchen
Price groups generally sort colors by material cost, availability, and design characteristics. The group number is a dealer pricing category, not a reliable national dollar amount: one fabricator’s Group 2 quote may not match another dealer’s Group 2 quote, and group names or offerings can vary by collection and market.
For budgeting, a lower-priced Wilsonart color may fit an installed range of roughly $55-$75 per square foot, a mid-tier option about $70-$95, and a higher-priced design about $90-$120 or more. These are broad market estimates rather than Wilsonart’s official group rates. Assumptions: standard 3-cm countertop, ordinary access, typical U.S. metro labor, and no major demolition.
Ask the seller to identify the exact color, price group, slab thickness, and included work on the written quote. This makes group-to-group comparisons more useful than comparing the group number alone.
How slab, fabrication, and labor shape the quote
A countertop quote combines the selected quartz with templating, cutting, edge finishing, sink and cooktop openings, transport, and installation. Fabricators may price by square foot, by project, or through a package rate, so the line items matter as much as the headline rate.
| Quote component | Typical range | What changes the charge |
|---|---|---|
| Quartz material | $25-$60/sq ft | Color group, slab availability, thickness, and waste |
| Fabrication and edge work | $15-$35/sq ft | Cutouts, seam placement, and edge profile |
| Installation labor | $10-$25/sq ft | Access, layout, cabinet readiness, and crew time |
| Removal and disposal | $5-$15/sq ft | Existing surface type and disposal requirements |
| Sink or cooktop cutout | $150-$400 each | Opening type, edge finish, and sink configuration |
Charges can overlap when a company bundles fabrication and labor into one rate. A separate labor allowance of roughly $50-$100 per hour can help explain custom or extra installation work, but many countertop firms quote labor as part of the project total.
Check whether the estimate includes templating, cutouts, backsplash, delivery, and old-countertop removal. An apparently cheaper per-square-foot quote may omit several of these items.
Why a 25-square-foot island costs more per square foot
Area is only one cost driver. A small job can have a higher unit price because templating, delivery, and crew mobilization still take time. A large or complex kitchen may need additional slabs, seams, or more fabrication, increasing the total even when its per-square-foot rate is lower.
Thickness and edge design affect both material use and shop time. Standard 3-cm quartz is common; a 2-cm selection may need a built-up edge or support details. A simple eased edge usually costs less than a decorative profile, which can add about $10-$30 per linear foot depending on the shop and design.
Cutouts also change the quote. One standard sink opening may be included or billed separately, while an undermount sink, cooktop opening, or multiple faucet holes can add charges. Long runs exceeding about 10 feet, tight turns, and seams across a visible island may require extra planning and handling.
Confirm the measured square footage and linear edge footage, not just the cabinet layout. Slab yield and seam placement can create waste that is not obvious from a room’s floor area.
How to lower the Wilsonart quartz quote without changing the scope
Request prices for two or three specific Wilsonart colors in different available groups, using the same dimensions and edge profile. A lower-group color can reduce the material allowance, but the difference depends on the dealer’s current slab cost and may be smaller than savings from simpler fabrication.
Keep the layout straightforward where practical. Fewer seams, standard edge treatment, and avoiding unnecessary backsplash height can limit shop work and material use. If an existing countertop can be removed safely by the owner, ask whether the installer permits customer removal and whether the savings exceed disposal or damage risks.
Compare at least three itemized quotes with matching inclusions. Verify measurement, sink cutout, faucet holes, delivery, installation, tax, warranty terms, and whether old-surface removal is included. Compare total installed prices for the same color and specifications, rather than selecting by price-group label alone.
How location and access shift installed quartz rates
Labor and delivery vary by market. As a planning estimate, dense coastal metros can run about 10%-25% above a national midpoint, while smaller towns may be 5%-15% below it when local fabricators and slabs are readily available. Rural delivery or long travel distances can erase that difference.
Stairs, narrow hallways, elevators, and limited parking may add handling fees or require a larger crew. A second-floor kitchen with no elevator can cost more to install than an otherwise identical ground-floor project. Ask the fabricator to inspect access before finalizing a price.
Use local written quotes as the best regional benchmark. National ranges are useful for screening a budget, but they cannot account for local labor rates, slab supply, or access charges.
Three kitchen layouts show how group pricing adds up
A 25-square-foot straight run with a standard edge, one sink cutout, and easy ground-floor access could total roughly $1,700-$2,400 installed. That estimate assumes a lower- to mid-priced color, limited waste, and no old-countertop removal.
A 40-square-foot L-shaped kitchen with a mid-group color, one sink cutout, and one seam may cost about $2,800-$3,800 installed. At an assumed $70-$95 per square foot, the total allows for ordinary fabrication and installation but excludes major plumbing changes.
A 55-square-foot kitchen with an island, a higher-priced design, multiple cutouts, and more detailed edges could reach $4,950-$6,600 or more. At $90-$120 per square foot, slab yield, visible seams, and extra handling are major cost variables.
These examples are budget scenarios, not fixed Wilsonart group quotations. Final pricing depends on the selected color, the fabricator’s group schedule, measurements, and local scope.
What to verify before accepting a fabricator’s group price
Ask whether the quoted group applies to the exact Wilsonart color and whether the slab is currently available. Confirm whether the price covers a full slab, only measured material, or a minimum project amount; leftovers may not be refundable or reusable.
Also confirm slab thickness, edge profile, sink mounting, seam location, backsplash dimensions, and warranty coverage. If the quote changes after templating, request the reason in writing, such as added square footage, a required extra slab, or a layout change.
Quartz pricing can also be affected by sales tax and local disposal rules. Permit costs are uncommon for a straightforward countertop swap, but plumbing or electrical work may require a licensed trade and local approval. A complete, measured quote is the clearest way to compare Wilsonart price groups and avoid surprise charges.