Winston mobile home prices depend on the specific model, whether it is new or used, and what the dealer includes in its quote. A new single-wide may run about $60,000-$110,000 for the home alone, while land, delivery, foundation, utility connections, and site work can bring a turnkey project to $100,000-$220,000 or more.
Ask whether a Winston quote covers only the home or the complete installed project. Prices below are U.S. planning ranges; the Winston name may refer to a dealer or model listing, and exact specifications and availability should be confirmed with the seller.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| New single-wide home | $60,000 | $85,000 | $110,000 | Home price, typically excluding land and setup |
| New double-wide home | $100,000 | $145,000 | $190,000 | Varies by floor plan, finishes, and market |
| Delivery and installation | $10,000 | $25,000 | $50,000 | Transport, foundation, set, and connections vary |
| Turnkey project, excluding land | $100,000 | $155,000 | $240,000 | Site conditions and local requirements drive totals |
What a Winston mobile home typically costs
For budgeting, a basic new single-wide of roughly 600-1,200 square feet is often $60,000-$110,000 before delivery and site preparation. A double-wide of about 1,000-2,000 square feet commonly costs $100,000-$190,000. Higher-end layouts, upgraded kitchens, premium siding, and energy packages can exceed these ranges.
As a rough comparison, home-only prices may work out to about $50-$100 per square foot for a standard new manufactured home, but advertised prices can exclude major project expenses. Land is separate and may add tens of thousands of dollars or substantially more depending on location. Assumptions: standard-grade finishes, ordinary access, and no land purchase or major grading included.
Use the model’s written specification and included-item list, not the name alone, to compare pricing. Ask for the exact floor plan, square footage, included appliances, warranty terms, and whether the listed price is a base price or a delivered-home price.
How delivery, labor, and site work shape the quote
A dealer quote can combine the home, transport, crane or set equipment, foundation, anchoring, utility work, permits, and finish work. Some sellers price setup separately, so a low home-only figure may not represent the amount needed before occupancy.
| Quote component | Low | Average | High | Typical scope |
|---|---|---|---|---|
| Transport and delivery | $2,000 | $6,000 | $15,000 | Distance, route, escorts, and sections affect cost |
| Foundation and anchoring | $3,000 | $8,000 | $18,000 | Depends on soil, frost depth, and foundation type |
| Set and installation labor | $3,000 | $7,000 | $14,000 | Includes leveling and joining sections where needed |
| Utility connections | $2,000 | $7,000 | $20,000 | Distance to water, sewer, electric, or gas is key |
| Permits and inspections | $500 | $2,000 | $6,000 | Local rules and required upgrades vary |
Labor charges may be quoted as a project total rather than an hourly rate. When billed by time, crews and subcontractors may charge roughly $50-$125 per worker-hour, with equipment and travel billed separately. Request an itemized quote that identifies delivery, setup, and exclusions.
Site work and utility distance can rival the cost of several upgrades inside the home.
Which floor-plan and site details raise Winston pricing
Size is a major driver: moving from a 900-square-foot single-wide to a 1,600-square-foot double-wide increases both the home price and the delivery and foundation scope. A double-wide also requires joining and finishing sections on site. Extra bedrooms, larger bathrooms, and expanded living areas add materials and labor.
Transport distance matters as well. A home hauled 50 miles may have a much lower delivery charge than one traveling 200 miles, especially if permits, route restrictions, or escort vehicles are needed. A site with a slope greater than about 6 inches across the home footprint, soft soil, trees, or limited truck access may need grading, retaining work, or specialized equipment.
Material and equipment choices change the quote. Upgraded insulation, higher-efficiency HVAC, premium flooring, and upgraded cabinetry can add several thousand dollars. Confirm whether appliances, HVAC, steps, skirting, and a porch are included; similarly named packages may not cover the same items.
Compare the same square footage, finish level, and site assumptions before judging two prices.
Regional delivery and installation prices differ
Labor and site preparation tend to cost more in high-cost metro areas and parts of the Northeast and West Coast than in many rural Southern and Midwestern markets. As a broad planning adjustment, installed labor and site work may be 10%-25% higher in expensive urban areas than in lower-cost rural areas. This is not a fixed regional price list; local contractor availability and code requirements can outweigh the general pattern.
In colder regions, frost-depth foundation requirements and winter access can raise costs. In remote areas, longer delivery routes and fewer available installers can increase transportation or scheduling charges. Get a local site estimate before treating a dealer’s advertised price as a project budget.
Three Winston-style quotes show the installed price range
A basic 900-square-foot single-wide might be quoted at $75,000 for the home, $5,000 for delivery, $9,000 for foundation and setup, and $6,000 for utility connections and permits. The estimated total is about $95,000, excluding land and major grading.
A 1,400-square-foot double-wide with standard finishes could include a $135,000 home, $7,000 transport, $17,000 foundation and set, and $12,000 connections and approvals, totaling about $171,000. A 1,800-square-foot upgraded double-wide might total $220,000-$260,000 after higher home pricing, longer transport, site work, and added finish options.
These examples assume ordinary access and no unusual soil or utility problems. A quote with fewer line items is not necessarily cheaper if it leaves required work out. Compare complete totals and written exclusions, not just the base-home figure.
Can choosing a shorter delivery route lower the bill
Often, but the savings depend on the dealer’s inventory and the home’s specifications. A nearby model may reduce transport expense and simplify scheduling, while changing to a different floor plan can erase that saving. Ask whether the dealer has a comparable home in stock within 50-100 miles and what delivery charge applies to each option.
Site preparation can also be controlled by selecting an accessible, relatively level location and confirming utility distances before signing. Avoid paying for premium finishes that can be added later, but verify that later work will not void a warranty or require expensive removal. Compare at least three itemized bids when local availability allows. Keep the requested floor plan and included features consistent so price comparisons are meaningful.
New Winston homes versus used mobile homes
A used single-wide may cost about $20,000-$70,000, and a used double-wide about $40,000-$120,000, depending on age, condition, location, and whether it must be moved. A low purchase price can be offset by transport, setup, repairs, and difficulty obtaining financing or insurance for an older home.
Before buying used, check the roof, floor, plumbing, electrical system, heating equipment, and signs of water damage. Get a written estimate for moving and reinstalling the home; some jurisdictions limit relocation of older manufactured homes or require code updates. A new home costs more upfront but typically offers current construction standards and a clearer warranty. Compare purchase price plus repairs and relocation against the installed price of a new home.