A Wolf SRT366 rangetop typically costs about $5,800-$7,800 before installation, with a common appliance-only price near $6,700. The installed total often reaches $6,500-$9,500, depending on dealer pricing, delivery, gas and electrical work, ventilation, and whether an existing 36-inch opening needs changes.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| SRT366 rangetop | $5,800 | $6,700 | $7,800 | Six-burner, 36-inch gas model; dealer price varies |
| Delivery and haul-away | $100 | $250 | $500 | Higher with stairs or difficult access |
| Standard installation | $400 | $800 | $1,500 | Assumes nearby gas and electrical connections |
| Ventilation equipment | $800 | $1,800 | $4,000 | Hood and ductwork are priced separately |
| Typical installed project | $6,500 | $8,500 | $12,000 | High end includes substantial ventilation or site work |
What a 36-inch Wolf SRT366 usually costs
The SRT366 is a 36-inch gas rangetop with six dual-stacked sealed burners. The appliance itself commonly falls in the $5,800-$7,800 range; a planning figure of about $6,700 is reasonable when comparing authorized-dealer quotes. Promotions, delivery terms, finish availability, and local dealer policies can move the actual offer outside that range.
Budget approximately $6,500-$9,500 for the rangetop and routine installation, before major ventilation or kitchen alterations. That assumes a standard natural-gas setup, an appropriately sized opening, accessible connections, and no major cabinet or code work. A new hood, longer duct run, or conversion to propane can raise the project total.
The model is a rangetop, not a freestanding range: it has no oven. Confirm the exact model and fuel before ordering, since the SRT366 and its liquid-propane configuration may have different availability and installation requirements. Assumptions: U.S. dealer pricing, standard stainless-steel unit, six burners, ordinary access, and no unusual regional labor premium.
How burners, delivery, and installation shape the quote
A dealer quote may combine the appliance with delivery, installation, and removal, or list each separately. Ask for an itemized offer and confirm whether installation covers only positioning and connection or also gas-line changes, electrical work, testing, and haul-away.
| Quote component | Typical range | Pricing basis | What changes the charge |
|---|---|---|---|
| SRT366 appliance | $5,800-$7,800 | Per rangetop | Dealer, promotion, fuel configuration, and included services |
| Delivery and placement | $100-$350 | Per delivery | Distance, stairs, access, and appointment requirements |
| Basic installation | $300-$800 | Per appliance | Connection condition and local installer rates |
| Gas or electrical adjustments | $200-$1,200 | Per job | New shutoff, outlet relocation, or additional line work |
| Removal and disposal | $50-$250 | Per old appliance | Haul-away service and local disposal charges |
| Vent hood and ducting | $800-$4,000 | Per system | Hood width, blower capacity, duct route, and finish work |
Installer labor varies by market and scope. A simple replacement may take about 2-4 labor hours, while connection changes or cabinet adjustments can take longer. For labor billed by time, is a useful estimate method; common appliance or trade rates are roughly $75-$150 per hour, with minimum visit charges possible.
Separate appliance price from site work before comparing quotes. One offer may look higher because it includes a hood, gas fitting, or old-unit removal that another dealer excludes.
Which gas, cabinet, and ventilation details raise the price
Fuel and utility conditions are major variables. A natural-gas installation with a properly located shutoff is usually less involved than adding a gas line or converting the appliance for propane. A propane setup may require the correct conversion parts and a qualified installer; confirm compatibility and costs with the dealer before purchase.
Opening dimensions also matter. The SRT366 is a 36-inch class appliance, but the actual cutout and clearances must match its installation instructions and the surrounding cabinetry. If the existing opening is undersized, widening counters or modifying cabinets can add roughly $300-$1,500 for limited adjustments, and more if countertop replacement is needed.
Ventilation can be the biggest added expense. A hood around 36 inches wide may fit the rangetop, but required capture area and airflow depend on installation conditions and local code. A short, direct duct path can keep work near the lower end; a long route through ceilings or exterior walls can add $500-$2,000 or more for ducting and finish repairs.
Measure the cutout, verify the fuel, and inspect the vent route before accepting an appliance-only price. A quote that ignores those details may not represent the total project cost.
Why installation labor differs by kitchen and region
Labor for a straightforward replacement commonly runs $300-$800, including basic placement and connection. A plumber or gas fitter may charge about $75-$150 per hour, while appliance delivery crews may use a fixed installation fee. Rates are often higher in major coastal cities and dense metro areas than in smaller towns, though access and availability also affect prices.
As a planning comparison, labor and service charges may be about 10%-20% above a national baseline in high-cost metropolitan areas, while rural markets can be 5%-15% below it. Those differences are not guaranteed: limited local installer availability, travel distance, or a same-week appointment can make a rural quote more expensive.
A routine replacement may be completed in 2-4 hours after delivery, provided the connections and opening are ready. New gas piping, outlet relocation, hood installation, or countertop work can extend the project to a full day or require separate visits. Request separate labor lines for the rangetop, gas work, and ventilation rather than one unexplained installation fee.
What three SRT366 project quotes can look like
These examples illustrate how scope changes the total. They are planning estimates, not fixed national offers, and assume a standard stainless SRT366 bought through a U.S. dealer.
| Project | Appliance and unit rate | Labor and extras | Estimated total |
|---|---|---|---|
| Like-for-like replacement | $6,300; about $175 per burner position | 3 hours at $100-$125 per hour, plus $150 delivery and disposal | $6,750-$6,825 |
| New gas connection | $6,700; about $186 per burner position | 5-7 hours of combined work, $400-$900 gas changes, and $200 delivery | $7,700-$8,700 |
| Full cooking-wall update | $7,300; about $203 per burner position | $1,500-$3,500 hood and ducting, plus $700-$1,500 installation and finish work | $9,500-$12,300 |
Per-burner figures are simple comparisons, not a way to value individual burners; the appliance also includes controls, grates, and its overall construction. The third example assumes a new ventilation system rather than reuse of an existing compliant hood. The rangetop itself is only part of the budget when the kitchen needs new utility connections or ductwork.
When hood work and removal add separate charges
Existing ventilation may be reusable if its size, airflow, condition, and duct route meet the installation requirements for the cooking setup. A replacement hood can cost about $500-$2,000 for the unit, while professional installation and duct modifications can bring the combined charge to roughly $800-$4,000. Custom cabinetry, a remote blower, or a difficult exterior exit can push costs higher.
Old-appliance removal is often $50-$250 when the dealer offers haul-away. If the rangetop is difficult to disconnect or access, a separate service visit may be necessary. Delivery can also cost more for stairs, narrow halls, long carries, or a scheduled installation window; get those conditions disclosed before purchase.
Permit requirements depend on local rules and the work performed. A simple replacement may not require a permit, but new gas piping, electrical changes, or a new exhaust route may trigger permitting or inspection. Allow roughly $50-$300 for common permit fees where applicable, plus any required contractor labor or code upgrades. Confirm permit responsibility and inspection fees in writing before work starts.
How the SRT366 compares with a repair or another rangetop
A repair can cost less than replacement when the existing rangetop is otherwise sound. Diagnostic visits commonly run $100-$200, and many component repairs land around $250-$800, depending on the part and labor. A costly control or burner repair on an older unit can approach the price of a lower-cost replacement, so compare the written repair estimate with the full installed price.
Other 36-inch gas rangetops from mainstream brands may cost roughly $1,500-$4,000 for the appliance, with installed totals around $2,000-$6,000 when connections are simple. The SRT366 carries a higher appliance price; buyers comparing models should check burner output, grate design, service availability, warranty terms, and whether the substitute fits the same cutout.
Compare complete installed quotes, not just appliance prices. A less expensive model may require cabinet changes or new ventilation, while a premium unit may fit an existing opening but still need utility work.
Which quote changes can lower the final SRT366 price
Ask multiple authorized dealers for the same model, fuel configuration, delivery address, and service scope. Compare the appliance price, installation, delivery, haul-away, and any promotional terms separately. A lower product quote may not be cheaper if delivery or installation is excluded.
Keep the project within the existing 36-inch opening and reuse compliant gas, electrical, and ventilation connections when an installer confirms they are suitable. Avoid paying for cabinet or duct changes until measurements and the manufacturer’s requirements show they are needed. If a hood is already in place, verify its condition and capacity rather than replacing it automatically.
Flexible delivery dates can help avoid rush scheduling, and bundling several appliances may reduce delivery or installation charges when a dealer offers a written discount. Do not select a contractor on hourly rate alone; confirm licensing where required, insurance, scope, warranty, and who handles permits. The most reliable savings come from controlling added work and comparing complete, itemized bids.