A used Yard Machines 5 hp leaf blower typically costs $75-$250, with a working, clean unit averaging about $160. Price depends on condition, engine performance, included accessories, local demand, and whether the buyer is comparing it with a newer walk-behind blower.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Used Yard Machines 5 hp blower | $75 | $160 | $250 | Running unit; age and condition vary |
| Nonrunning unit for repair | $25 | $65 | $120 | Price depends on parts and engine condition |
| Comparable new gas walk-behind blower | $350 | $500 | $700 | Different brands and specifications |
| Common small-engine repair | $50 | $125 | $250 | Parts and labor vary by fault |
Used Yard Machines 5 hp blower prices by condition
Yard Machines 5 hp blowers are older gas-powered equipment, so most buyers will find them used rather than as current new inventory. A project machine that does not start may sell for $25-$120; a running unit with ordinary wear commonly lists for $100-$200. Clean, tested examples with a working drive system and no major damage can reach $200-$250 in areas with limited supply.
A realistic target for a dependable used machine is about $125-$200. These estimates assume a complete blower with its original engine and no substantial repair needed. Listings above $250 should generally include unusually good condition, recent maintenance, or useful accessories to justify the premium.
Assumptions: U.S. private-party used sale, standard 5 hp configuration, and local pickup.
What engine, labor, and pickup add to the asking price
For used equipment, the purchase price is only part of the budget. A seller may offer a lower price because the carburetor, ignition, tires, or blower housing needs work. Repair-shop labor often runs $75-$125 per hour, and many shops charge a $40-$90 diagnostic or minimum service fee before parts.
| Quote component | Low | Average | High | Typical scope |
|---|---|---|---|---|
| Used blower purchase | $75 | $160 | $250 | Running or tested unit |
| Carburetor cleaning or replacement | $50 | $110 | $190 | Parts and basic labor |
| Ignition or starter repair | $45 | $100 | $180 | Fault diagnosis and repair |
| Tire, cable, or minor hardware | $20 | $60 | $130 | One or more small components |
| Delivery or transport | $0 | $30 | $75 | Local pickup or short delivery |
One to two hours of shop time at $75-$125 per hour can add $75-$250 before parts. Confirm whether a quote includes diagnosis, parts, shop supplies, and tax.
Engine hours and housing damage can shift the price
These older machines rarely have a reliable hour meter, so starting behavior and inspection matter more than a claimed hour count. A cold engine that starts without repeated priming, idles steadily, and accelerates without smoking is worth more than an untested unit. Blue smoke, fuel leaks, knocking, or a damaged blower housing can indicate costly work.
Also check the wheel and handle assembly, throttle cable, and any drive mechanism. A cracked housing or missing outlet component can be harder to source than routine tune-up parts. If the machine has been stored with fuel in it for several seasons, budget for fuel-system cleaning rather than assuming it only needs fresh gas.
A missing or damaged major component can erase the savings from a low asking price. Ask the seller to demonstrate a cold start and run the blower long enough to check for stalling or unusual vibration.
How do regional listings compare with new 5 hp blowers?
Private-party prices vary with season and local inventory. In suburban areas with many lawn-equipment listings, used prices may be 10%-20% below a thin rural market. In some rural locations, fewer listings and longer travel distances can push asking prices 10%-25% higher. Spring cleanup season can also increase demand compared with late fall or winter.
A comparable new gas walk-behind blower generally costs about $350-$700, depending on engine size, design, and warranty. That is not an exact replacement price for this discontinued model: newer machines may have different airflow, controls, and service support. Compare specifications and warranty terms rather than treating horsepower alone as equivalent performance.
For a used unit priced near $250, compare it against a new machine before committing. A new-equipment purchase costs more upfront but may include a warranty and easier access to parts.
Repairing a nonstarter versus buying a running machine
A basic tune-up may cost $50-$120 if the issue is stale fuel, a spark plug, or routine cleaning. Carburetor work often totals $75-$190, while a more involved engine repair can exceed $250. Parts availability matters: common small-engine components may be obtainable, but model-specific housings or controls can be difficult to find.
For example, a $60 nonstarter plus a $120 carburetor repair totals $180 before transport or additional faults. A tested running machine at $160 may be the lower-risk purchase. Get a written estimate if a shop identifies compression, crankshaft, or housing damage; those repairs can make replacement more economical.
Keep the combined purchase and repair budget below the cost of a comparable, warrantied alternative. A low price is not a bargain if the engine needs major work or replacement parts are unavailable.
Three realistic Yard Machines blower purchase budgets
| Buying scenario | Price and work | Estimated total | Budget note |
|---|---|---|---|
| As-is project | $50 purchase plus $50-$150 repair parts or labor | $100-$200 | Uncertain outcome; inspect first |
| Tested private-party unit | $140-$190 purchase plus $0-$30 transport | $140-$220 | Best balance if it starts and runs well |
| Shop-serviced used unit | $180-$250 purchase plus $50-$125 service | $230-$375 | Ask what work is documented |
These totals assume no major engine or housing failure. A shop-serviced listing is not automatically better value unless the seller can describe the work and provide a receipt or limited warranty.
Ways to keep the used blower price under control
Compare at least three local listings and negotiate based on specific defects, not age alone. Test the blower cold, check for fuel leaks, inspect the housing and wheels, and confirm that controls and safety guards are present. If testing is impossible, price the machine as a repair project rather than as a verified runner.
Shopping outside spring cleanup season may reveal lower asking prices, though selection can be limited. Arrange pickup yourself when practical, and avoid paying extra for accessories that are not needed. Before purchasing, call a local small-engine shop about parts support for the exact model number on the machine.
The most controllable savings come from buying a tested unit and avoiding uncertain repairs. Set a maximum total budget that includes transport, diagnosis, and likely maintenance before making an offer.