Zurn list prices vary widely by product, material, connection size, and commercial-grade features. For budgeting, common items range from about $75 for basic drain components to several thousand dollars for larger backflow assemblies or complete fixture packages; distributor discounts and installation are separate.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Floor drains and cleanouts | $75 | $250 | $900 | Body material, outlet, and grate affect price |
| Flush valves | $180 | $400 | $800 | Manual and sensor models differ |
| Commercial faucets | $125 | $350 | $1,000 | Finish, sensor, and power options add cost |
| Backflow preventers | $300 | $1,300 | $5,000+ | Size and assembly type drive range |
| Toilets and urinals | $300 | $900 | $2,000+ | Fixture only; carriers and valves may be extra |
What Zurn List Prices Look Like by Product
Zurn sells commercial plumbing products across drainage, fixtures, faucets, flush valves, water control, and piping categories. Because a “Zurn list price” is not one fixed price, the useful comparison is by product type and specification. Small replacement parts can cost under $50, while complete commercial assemblies can exceed $5,000.
Typical budget pricing for a single product is often $100-$1,500 before installation. A basic floor drain or cleanout may list around $75-$300; a commercial faucet commonly falls around $125-$600; and a flush valve is often $180-$700. A toilet or urinal can run $300-$1,500 before a carrier, flush valve, or labor is added.
These are planning ranges, not a current manufacturer catalog quotation. Premium finishes, electronic controls, high-capacity assemblies, specialty materials, and uncommon configurations can push prices beyond the listed high end. A distributor may sell below the suggested list price, while freight, tax, and local availability affect the delivered price.
Assumptions: U.S. commercial-grade products, standard configurations, product only, before sales tax and installation.
How Drain, Valve, and Fixture Lines Shape the Quote
A contractor’s estimate may combine several Zurn product lines. The fixture itself is only one part of the bill: control valves, carriers, drains, traps, trim, sensors, and connection components can be separately priced. The table shows common component-level ranges for standard commercial specifications.
| Quote component | Materials | Labor | Equipment | Delivery/Disposal |
|---|---|---|---|---|
| Floor drain replacement | $75-$500 per drain | $200-$600 | $25-$100 | $25-$150 |
| Flush valve installation | $180-$700 per valve | $150-$400 | $0-$75 | $15-$75 |
| Commercial faucet | $125-$800 per faucet | $125-$350 | $0-$50 | $15-$75 |
| Backflow assembly | $300-$5,000+ | $300-$1,500 | $50-$500 | $30-$250 |
Labor varies with access and whether pipe changes are needed. A straightforward exposed faucet swap may take one to two hours; a drain replacement in concrete or a backflow installation with testing can take substantially longer. Taxes, permits, and inspection fees may appear as separate quote lines.
Check whether the quote includes the complete assembly, installation, testing, and disposal. A low product-only price may not be comparable to an installed quote.
Which Size, Material, and Controls Raise the Price
Product specifications account for much of the difference between a low and high Zurn list price. A 2-inch drain and a larger 4-inch outlet are not equivalent purchases; larger flow capacity, heavier construction, and specialty connections generally increase both material and handling costs.
Size and system type can move an estimate by hundreds or thousands of dollars. Small backflow units for modest line sizes may cost several hundred dollars, while 2-inch and larger assemblies can reach $1,500-$5,000 or more. A 3-inch or 4-inch floor drain, heavy-duty grate, or corrosion-resistant body can also cost several times more than a basic drain.
Material matters. Cast iron, stainless steel, and bronze components tend to cost more than basic coated or plastic options, though the right material depends on the application and code. In faucet and flush-valve lines, sensor operation, power supply, water-saving settings, and vandal-resistant features add components and may require compatible accessories.
Scope changes also matter. Replacing a like-for-like valve is usually less expensive than modifying a rough-in, changing a carrier, or adapting old piping. A mismatch in connection size or mounting dimensions can require additional fittings and labor. Before ordering, compare model number, outlet size, finish, flow specification, and included trim against the existing installation.
Where a Zurn Quote Can Be Reduced Without Cutting Scope
Start by confirming the exact model and required features. If a project specification calls for a standard manual flush valve, an electronic sensor package may add cost without serving a required purpose. Likewise, a decorative finish may be unnecessary in a back-of-house space, while an appropriate durable finish is still important in public areas.
Matching the required performance instead of paying for unneeded options is the clearest cost-control move. Ask the supplier to price the specified model alongside a compatible lower-cost alternative, identifying any differences in flow rate, material, warranty, or code compliance. Do not substitute a product that fails project specifications or local requirements.
Where several fixtures need replacement, request one consolidated quote for the full quantity. Multiple units may reduce delivery charges and simplify labor scheduling. For a single failure, compare repair parts with full replacement: a cartridge or sensor repair may cost $50-$300 in parts, while a complete faucet can be several hundred dollars before labor.
Provide site photos, model numbers, connection measurements, and access details before asking for a quote. This reduces the chance of ordering incorrect components or paying for a second site visit. Compare at least two itemized bids on the same model and scope, and check whether freight, tax, testing, and commissioning are included.
Why Regional Distributor Prices Differ Across the U.S.
List pricing may be national, but the amount a buyer pays is affected by distributor discounts, freight, local labor rates, and product availability. Large metro areas may have more suppliers and faster access to stock; remote markets may incur higher shipping charges or longer lead times. A catalog price alone does not reveal these local expenses.
Installed totals in high-cost metro markets can run roughly 15%-35% above comparable rural estimates. The difference is often labor and service-call expense rather than a different manufacturer list price. In regions with fewer commercial plumbing contractors, minimum charges and travel time can raise the total even for a modest repair.
Freight can be especially relevant for heavy fixtures, carriers, and large-diameter valve assemblies. A small parcel may add only $15-$75, while oversized or palletized shipments can add $100-$500 or more depending on distance and handling. Confirm whether the distributor’s quote is ex-warehouse, delivered, or subject to a fuel or lift-gate fee.
Regional quotes should also be checked for tax treatment and local code requirements. A product that is available immediately may cost less overall than a lower-priced item requiring expedited shipping. Buyers should compare delivered price and expected arrival date, not simply the line item shown in a catalog.
How Many Labor Hours a Zurn Installation Usually Takes
Installation cost depends on the trade task, access, and whether existing connections can be reused. A basic exposed faucet or flush-valve replacement may take about one to three labor hours. Replacing a drain in an accessible floor can take several hours; cutting concrete, changing piping, or repairing a carrier can extend the job to a full day or more.
Commercial plumbing labor commonly budgets at $75-$150 per hour, with higher rates for emergency or specialty work. Contractors may also charge a service-call minimum of $100-$250, even when the repair takes less than an hour. After-hours response can add roughly 25%-100% to standard labor rates.
For a simple fixture swap, a contractor might quote $150-$450 in labor. A backflow installation can involve pipe fitting, shutoff coordination, inspection, and testing, producing labor charges around $300-$1,500. The exact allowance depends on assembly size, test requirements, access, and whether a licensed tester is required locally.
Ask whether the bid includes startup, leak checks, sensor setup, backflow testing, and cleanup. can help compare bids, but an hourly calculation does not capture minimum charges, specialty tools, permits, or warranty coverage. A fixed-price proposal may be easier to budget when the existing conditions are well documented.
When Repair Parts Cost Less Than Replacing a Fixture
Repair is often economical when the fixture body and connections remain sound. A replacement cartridge, diaphragm, sensor, or seal may cost about $20-$250, with labor adding roughly $100-$350. For an older unit with corrosion, discontinued parts, or repeated failures, a full replacement can be more practical despite the higher initial cost.
Compare the repair total with the installed replacement total, not just the part price. A $75 repair component can become a $250-$500 service bill after diagnosis and labor. A new faucet may cost $125-$800, and a flush valve $180-$700, before installation. If multiple internal parts have failed, replacement can reduce repeat service calls.
For a drain, changing only the grate or strainer may cost tens to a few hundred dollars, while replacing the drain body can require floor work and several hundred dollars of labor. Backflow preventers are a special case: repair kits may be less expensive, but testing and local compliance obligations can determine whether repair is acceptable.
Before authorizing work, ask the plumber to identify the failed part, explain whether the model is still supported, and state any warranty on parts and labor. If repair and replacement quotes are close, the condition of the piping and expected future maintenance should influence the decision.
Three Zurn Purchase Scenarios With Installed Budget Ranges
These examples show how product cost and site labor combine. They use common commercial configurations and ordinary access; unusual finishes, difficult demolition, permits, or after-hours work can raise totals. A local quote should confirm model numbers and whether the listed equipment is available.
| Scenario | Specification | Product allowance | Labor allowance | Estimated total |
|---|---|---|---|---|
| Faucet swap | One standard commercial faucet, existing connections | $175-$450 | 2 hours at $90-$140 | $355-$730 |
| Restroom valve refresh | Four manual flush valves, like-for-like replacement | $800-$2,400 | 6-10 hours at $90-$140 | $1,340-$3,800 |
| Backflow replacement | One 1.5-inch assembly, accessible piping and test | $900-$2,000 | 5-9 hours at $100-$150 | $1,400-$3,500 |
In the faucet example, a basic model near $175 is assumed; sensor models and premium finishes can push equipment toward the upper range. The restroom estimate assumes the carrier and fixtures remain usable, so structural plumbing repairs are excluded.
Use these totals as bid-checking ranges, not guaranteed Zurn list prices. For a backflow project, larger assemblies, restricted access, test failures, or piping changes can move the total well above the example. Ask the contractor to separate equipment, labor, testing, freight, and tax so the main cost driver is visible.
What to Verify Before Ordering From a Zurn Price Sheet
A manufacturer or distributor price sheet may show a suggested list amount rather than the transaction price. Confirm the document date, currency, model revision, and whether listed accessories are included. Product families can contain near-identical model numbers with different materials, connections, finishes, or control options.
Request a written quote tied to exact part numbers and quantities. The quote should state the discount, freight terms, expected ship date, return restrictions, and any price expiration. Some special-order items cannot be returned or may have restocking charges, so verifying dimensions and compatibility before purchase can prevent a costly mistake.
For project purchasing, check whether the price includes trim, mounting hardware, sensors, power supplies, and required rough-in components. On a large order, ask whether the supplier can hold pricing through the project schedule and deliver in phases. Keep the approved submittal and final invoice together so future maintenance staff can identify replacement parts and warranty terms.