ABC Supply roofing prices depend on product, order size, branch, delivery, and whether the buyer has contractor pricing; the company does not publish one national retail price list. For a typical 2,000-square-foot roof, roofing materials alone may run about $2,500-$8,000, while a contractor-installed replacement commonly totals $9,000-$22,000. Shingle grade, roof complexity, tear-off, and local labor rates drive the biggest differences.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Architectural shingles | $100-$140 per square | $140-$190 per square | $190-$260 per square | One roofing square covers 100 sq. ft.; product and market affect quote. |
| Roofing materials for 2,000 sq. ft. | $2,500 | $4,500 | $8,000 | Includes typical accessory materials and waste allowance. |
| Installed asphalt roof | $9,000 | $14,000 | $22,000 | Assumes tear-off and standard residential installation. |
| Metal roofing material | $250 per square | $400 per square | $700+ per square | Panel type, finish, gauge, and trim change pricing. |
What ABC Supply Roofing Materials Usually Cost
ABC Supply is a wholesale distributor serving contractors and other trade customers, so a homeowner may receive a quote through a roofing contractor rather than see a public shelf price. Branch inventory, brand, product line, order quantity, account terms, and delivery location can all change the quote. Estimates below are practical U.S. budget ranges, not guaranteed ABC Supply prices.
Asphalt shingles are generally priced by roofing square. Basic three-tab products may cost about $80-$130 per square, while common architectural shingles often fall around $100-$260 per square. Premium impact-resistant or designer shingles can reach $250-$450 or more per square. A square is 100 square feet of roof surface, not floor area.
For a 2,000-square-foot roof, allow roughly 22-24 squares after a typical waste factor. Shingles for that order might cost $2,200-$6,200 at common architectural grades, before underlayment, starter strips, ridge caps, flashing, nails, tax, and delivery. A steep or cut-up roof may require more waste than a simple gable roof.
Assumptions: U.S. market estimates, standard asphalt-shingle roof, ordinary access, and a 10%-15% material allowance for cuts and waste.
How Shingle, Underlayment, and Flashing Charges Add Up
A roofing quote includes more than the visible shingle. Underlayment, ice-and-water protection, starter strips, ridge caps, drip edge, flashing, fasteners, and ventilation components can add hundreds or several thousand dollars, depending on roof size and code requirements. Compare the complete bill of materials rather than judging a quote by shingle price alone.
| Quote component | Typical quantity or unit | Low | Average | High |
|---|---|---|---|---|
| Architectural shingles | Per square | $100 | $160 | $260 |
| Synthetic underlayment | Per square | $15 | $30 | $55 |
| Ice-and-water membrane | Per roll, about 2 squares | $50 | $85 | $140 |
| Starter and ridge materials | Per roof | $150 | $350 | $700 |
| Flashing, drip edge, and fasteners | Per roof | $250 | $600 | $1,200 |
| Delivery and handling | Per order | $75 | $200 | $500 |
Material line items vary by package size and brand. For instance, an ice-and-water membrane roll may cover less than two full squares after overlaps, and a roof with valleys or many penetrations needs more flashing. Delivery charges can rise when the truck must make a special trip, use a rooftop conveyor, or serve a distant or difficult-to-access site.
Assumptions: Ranges represent common U.S. retail-equivalent budgets; ABC Supply branch quotes may differ by account, volume, and local inventory.
Roof Size and Shingle Grade Shift the ABC Supply Quote
Roof area is measured along the roof plane, so it is often larger than the home’s footprint. A 1,500-square-foot single-story home may have around 1,700-2,000 square feet of roof, while a steep, multi-level home with dormers can exceed 2,500 square feet. A contractor’s measurement or satellite report is more reliable than floor area for estimating orders.
Waste is a key threshold. A straightforward roof with few cuts may need about 10% extra material; hips, valleys, dormers, and diagonal patterns can push the allowance to 15%-20%. For 20 squares, that difference means ordering about 2-4 additional squares. At $160 per square, the added shingles alone could cost $320-$640, plus related accessories.
Shingle grade can also shift a 20-square order significantly. Moving from a $120-per-square standard product to a $220-per-square impact-resistant product adds roughly $2,000 in shingle cost before waste. Premium warranties, heavier profiles, enhanced wind ratings, and matching color availability can raise the quote further. Confirm the exact product name and warranty class on every material estimate.
Roof pitch affects both quantity and labor. A roof with a 6:12 pitch has more surface area than a flat footprint, and pitches above 8:12 often require extra safety measures and slower installation. Rotten decking is another scope variable: replacing 4-8 sheets of plywood at about $70-$150 per sheet installed can add $280-$1,200, with higher charges possible for extensive damage.
Assumptions: Plywood replacement estimates include typical sheet material and installation; actual charges depend on access, thickness, and local labor rates.
How Regional Delivery and Contractor Accounts Affect Pricing
Material and installation prices can vary by region because of freight, labor availability, weather demand, local competition, and code requirements. As a broad budgeting adjustment, total roofing quotes in lower-cost rural markets may run 5%-15% below a national midpoint, while major coastal metros or high-demand markets may run 10%-25% above it. These are planning deltas, not fixed ABC Supply regional price rules.
Distribution branch proximity matters most when an order is heavy or time-sensitive. A standard delivery within the branch’s normal service area may cost about $75-$250; longer-distance trips, crane service, or special delivery windows may reach $300-$700. Ask whether quoted delivery includes rooftop placement or only curbside drop-off, because those are different services.
Contractor account pricing, volume discounts, credit terms, and manufacturer programs can change the amount paid. A homeowner buying through a roofer may not receive the distributor’s contractor rate directly; the contractor may combine materials, ordering, handling, warranty administration, and labor in one project price. Request an itemized materials list and clarify whether delivery, tax, and handling are included.
Seasonal demand may also matter. After hail, wind, or hurricane damage, local supply and installation schedules can tighten, and specialty colors may be backordered. A standard product ordered before peak storm season may be easier to source than a premium profile during a regional rebuilding surge.
What a 2,000-Square-Foot Roof Order Could Include
A useful comparison is a simple, moderately pitched roof requiring about 22 squares, including waste, with standard architectural shingles. The following examples separate distributor-supplied materials from installed project costs. Labor totals are contractor estimates and are not ABC Supply prices.
| Example | Material scope | Materials | Labor and other work | Installed total |
|---|---|---|---|---|
| Basic replacement | 22 squares of standard shingles, basic underlayment, ordinary flashing | $2,800-$4,000 | $5,500-$8,000 | $8,300-$12,000 |
| Midgrade roof | 22 squares of architectural shingles, synthetic underlayment, upgraded ridge and ice barrier | $4,000-$6,000 | $6,500-$9,000 | $10,500-$15,000 |
| Complex premium job | 24 squares of premium shingles, extensive flashing, ventilation upgrades | $6,500-$9,500 | $9,000-$14,000 | $15,500-$23,500 |
The basic example assumes normal access and limited deck repairs. The midgrade scenario allows more weather protection and better accessory coverage. The complex job includes extra roof area, cutting, and upgrades; steep pitch, multiple layers of old roofing, or structural repairs could raise the total above the range.
Sales tax is location-dependent and may apply to some or all supplied materials. A quote that seems lower may exclude permit fees, disposal, plywood replacement, or ventilation corrections. Compare the same square count, product line, waste allowance, and scope before deciding that one bid is cheaper.
Assumptions: 2,000 square feet of roof surface, standard access unless noted, and typical U.S. contractor rates.
When Tear-Off and Roofing Labor Outweigh Material Savings
On a typical asphalt roof replacement, labor and project services can cost as much as or more than the roofing materials. A crew may need 1-3 days for an ordinary single-family roof, with roughly 3-6 workers depending on complexity, weather, and disposal logistics. Contractor labor commonly pencils out around $45-$90 per worker-hour, although companies generally quote by the project rather than hourly.
Removing one existing shingle layer may add about $1-$3 per square foot, or roughly $2,000-$6,000 on 2,000 square feet, including disposal in many markets. A second layer, slate, tile, or difficult access can cost more. Dumpster rental and hauling may separately run $400-$1,200 depending on location, container size, and weight limits.
Roofing access can add cost even when the material order is ordinary. A steep pitch, narrow driveway, landscaping that limits staging, or a need for hand-carrying bundles may add hundreds to several thousand dollars. Contractor quotes should state how many old layers are included and how damaged decking will be priced if discovered after tear-off.
Material savings of a few hundred dollars can be outweighed by removal, repair, or access charges. Confirm whether the contractor includes cleanup, magnetic nail pickup, flashing replacement, and haul-away in the quoted total.
Compare Asphalt Shingles With Metal Roofing Materials
Asphalt is generally the lower-cost choice for initial materials and installation. Common architectural shingles may cost about $100-$260 per square for materials, with a full replacement often around $4.50-$11 per square foot installed. Standing-seam metal panels may cost roughly $400-$900 per square for materials and $10-$20 per square foot installed, depending on metal, seams, trim, and labor.
Exposed-fastener metal panels can be less expensive than standing seam, often around $250-$600 per square for material, but panel profiles, coatings, underlayment, and trim packages vary. Metal pricing may also be quoted per panel or linear foot rather than by square, so compare the roof coverage and included trim rather than the panel’s sticker price alone.
A repair may be less expensive than replacing the entire roof when damage is localized and the existing materials are available. A shingle repair can run about $300-$1,000 for a small area; metal panel repair may range from $500-$2,000 depending on access and flashing. A color mismatch or discontinued product can make patching less practical.
Long-term ownership depends on climate, installation, maintenance, and warranty terms. Metal can cost more upfront but may have a longer service life; asphalt usually has a lower entry price and easier spot repairs. Compare installed cost, expected upkeep, and replacement timing rather than material price in isolation.
Ways to Lower an ABC Supply Roofing Order
Choose a standard color and commonly stocked product when performance and appearance are acceptable. Special-order colors or premium lines may raise material cost and delay delivery. Ask the roofer to price a standard architectural shingle and one upgrade side by side, with the same underlayment and accessory scope.
Control the order quantity with a measured roof plan and a clear waste factor. Too little material can cause an expensive return trip or color-lot mismatch; too much can leave nonreturnable bundles. Confirm whether unopened products are returnable, whether restocking fees apply, and whether delivery charges are repeated for returns or add-on orders.
Compare at least three written contractor quotes using the same shingle model, number of squares, underlayment, ice barrier, flashing, tear-off layers, disposal, and decking allowance. A low bid that omits ventilation work or disposal may not represent a true saving. Ask each contractor to separate material, labor, delivery, disposal, permits, and optional upgrades.
Scheduling can help when it avoids emergency work after a storm, but weather and contractor availability still govern the start date. Bundle related work such as gutters or ventilation only when the combined scope is clearly itemized and competitively priced. The most dependable savings come from matching product grade to requirements and avoiding duplicated, unnecessary, or poorly specified work.
Before approving a quote, verify the brand and product designation, warranty coverage, delivery method, taxes, and any price expiration date. ABC Supply branch prices may change with inventory and market conditions, so a written quote is more useful than an online estimate or a generic national average.