Amiad filter prices in the United States can range from about $150 for a small manual irrigation filter to $20,000 or more for a large automatic filtration package. The final quote depends on filter type, flow capacity, micron rating, controls, installation, and whether the project needs several filters in a system.
Because pricing varies by model and distributor, the figures below are budget estimates rather than a manufacturer’s fixed price list. For a standard agricultural or commercial installation, many buyers should budget $1,000-$6,000 for equipment before installation.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Manual screen or disc filter | $150 | $500 | $1,500 | Small line sizes and basic housings |
| Automatic self-cleaning filter | $1,500 | $5,000 | $15,000 | Price varies with flow and controls |
| Media or sand filtration system | $3,000 | $9,000 | $25,000+ | Multiple tanks or higher flow raise cost |
| Installation labor | $500 | $2,000 | $8,000+ | More for piping, electrical work, or site changes |
| Installed project total | $700 | $6,500 | $35,000+ | Excludes unusually extensive construction |
Amiad filter prices by type and flow capacity
Basic manual filters are generally the least expensive choice. Small screen or disc units for irrigation and light commercial use often cost $150-$1,500, depending on connection size, housing material, and filtration area. Replacement screens, discs, seals, and other service parts can add $20-$500 per item.
Automatic self-cleaning models typically run $1,500-$15,000 for equipment. Compact units with modest flow requirements sit near the lower end; larger bodies, automatic flushing assemblies, and control panels push the price up. Industrial installations with multiple filter units or specialized controls can exceed $20,000.
Media filtration systems are often priced as an assembly rather than a single filter. A small system may cost $3,000-$8,000, while larger multi-tank systems can reach $25,000 or more. Confirm whether a quote covers one filter, a complete filtration skid, or all units needed for the specified flow.
These budgets assume standard U.S. distributor availability and ordinary commercial or agricultural specifications. Stainless steel, unusual connection standards, high-pressure service, or custom automation can move prices above the ranges. Regional freight and sales tax may also be added.
Assumptions: U.S. distributor pricing, standard materials, typical agricultural or commercial use, and no major construction.
What screen, controls, and labor add to the quote
An equipment-only price does not necessarily include the connections and work needed to put a filter into service. Request an itemized quote showing the filter body, filtration element, controls, installation, and any changes to existing piping or wiring. Separating these costs makes competing bids easier to compare.
| Quote component | Typical cost | Basis | Common price trigger |
|---|---|---|---|
| Filter body and element | $150-$15,000 | Per unit | Type, diameter, material, capacity |
| Controller and flush assembly | $300-$3,500 | Per system | Automation and sensor options |
| Valves, fittings, and piping | $200-$2,500 | Per installation | Pipe size and connection changes |
| Installation labor | $75-$150 per hour | Per technician hour | Access and plumbing complexity |
| Freight and delivery | $50-$1,000+ | Per shipment | Weight, distance, and crating |
| Removal and disposal | $100-$800 | Per old unit | Corrosion or restricted access |
A straightforward replacement may need only a few fittings and several hours of labor. A new installation can involve pipe supports, bypass lines, electrical supply, drainage for backwash, and commissioning. Those tasks can add several thousand dollars even when the filter itself is relatively small.
For labor budgeting, a simple swap may take 4-8 hours; a more involved installation can require 12-30 hours across plumbing and electrical work. At $75-$150 per hour, 8 hours of labor costs about $600-$1,200 before materials or travel fees.
How micron rating, pipe size, and flow change pricing
Required flow is one of the strongest price drivers. A filter serving a line under 50 gallons per minute may fit a compact configuration, while demand above 200 gallons per minute can require a larger unit, parallel filters, or a different system design. The filter should be sized for peak operating flow, not just average use.
Micron rating also affects the equipment and operating design. A 200-micron screen is typically less demanding than a 50-micron specification, which may require more filtration area or more frequent cleaning. Fine filtration can add hundreds or thousands of dollars, especially when high flow must be maintained.
Connection diameter is another practical threshold. Moving from a 1-2-inch line to a 4-6-inch line can raise equipment, valve, and fitting costs substantially because the body and supporting pipework are larger. A system needing multiple units or a pressure rating above ordinary irrigation service should be quoted against its exact operating conditions.
Water quality matters as much as nominal capacity. Heavy sediment, algae, organic matter, or debris can call for a media stage, larger screen area, or automatic flushing. Provide the supplier with water source, peak flow, target micron rating, pressure range, and solids description before requesting a model price.
U.S. installation labor varies with site and system size
Local labor rates and job conditions can make identical equipment quotes produce different installed totals. In lower-cost rural markets, plumbing or irrigation labor may run around $65-$100 per hour; major metropolitan areas commonly reach $100-$175 per hour for qualified commercial trades. These are broad planning rates, not fixed local bids.
A one-filter replacement beside an accessible main line may take one technician most of a day. A multi-filter installation with controls, electrical connections, and a backwash drain may require a two-person crew for one to three days. Labor can rise further if the system must be shut down outside normal operating hours.
Remote sites add travel, delivery, and sometimes a minimum service charge of $150-$500. Difficult access, buried piping, concrete work, or a missing power connection can add $500-$5,000 or more. Ask whether the bid includes commissioning and a post-installation flow or leak test.
Three sample Amiad filter quotes with installed totals
The examples below illustrate how scope changes the budget. They use plausible U.S. rates and do not represent official Amiad list prices. Final model selection must match operating pressure, water quality, and required flow.
| Project | Equipment | Labor and other work | Estimated total |
|---|---|---|---|
| Small greenhouse line, 30 GPM, manual screen unit | $350-$800 | 4-6 hours, fittings and test: $500-$1,100 | $850-$1,900 |
| Farm irrigation main, 150 GPM, automatic filter | $2,500-$5,500 | 12-18 hours, valves and wiring: $1,500-$3,500 | $4,000-$9,000 |
| Commercial process water, 400 GPM, multi-unit system | $9,000-$20,000 | 30-50 hours, piping and commissioning: $4,000-$10,000 | $13,000-$30,000 |
In the first example, a nearby water source and existing compatible connections keep labor low. In the farm example, automatic flushing and a control connection add cost. The process-water project assumes larger equipment and more extensive installation; a custom skid, unusual materials, or strict process requirements could increase the estimate.
When comparing quotes, check that each bidder uses the same flow, micron rating, pressure, and scope. A cheaper price may cover a smaller filter or omit electrical work, fittings, freight, or commissioning. Compare complete installed totals, not just the line item for the filter body.
Manual screen filters versus automatic Amiad systems
A manual screen or disc filter can cost less upfront and may suit a small irrigation line with manageable debris and an available operator. A typical unit costs $150-$1,500, while cleaning is usually performed by hand. This choice can be economical when the filter is easy to access and downtime is not costly.
Automatic self-cleaning equipment costs more initially, often $1,500-$15,000, but reduces routine manual cleaning. It can make sense where flow is high, solids load is frequent, or operators cannot inspect the filter often. The system still needs periodic checks, replacement parts, and a working flush discharge.
Media filtration may be appropriate for water carrying substantial organic material or fine suspended solids, but tanks and backwash requirements add expense. A media system can cost $3,000-$25,000 or more before installation. Choose by water analysis and operating need rather than paying for automation or filtration fineness that the application does not require.
How to lower the installed price without undersizing
First, confirm the design flow and required micron rating with the system designer or supplier. Oversizing “for future use” may add thousands of dollars, while undersizing can cause pressure loss and premature cleaning. A written specification helps bidders price the same duty.
Keep the scope controlled by identifying which existing valves, pipe runs, power connections, and supports can be reused safely. Preparing a clear equipment location and providing access before the crew arrives can reduce onsite hours. Do not remove safety devices or skip required electrical and plumbing work to save money.
Compare at least two itemized distributor or installer quotes with matching model specifications. Ask whether freight, sales tax, startup, and replacement elements are included, and whether the quoted delivery time is standard. If a filter is damaged, compare the cost of replacing the element, seals, or controller with replacing the complete unit.
Standard materials and common connection sizes are usually less costly than custom configurations. Avoid optional monitoring or remote controls unless they solve a real operating problem. The most reliable savings usually come from accurate sizing, reuse of serviceable infrastructure, and a quote that excludes unnecessary upgrades.
Freight, replacement parts, and ownership expenses
Freight is easy to overlook, particularly for large housings or multi-tank systems. Local stock may keep delivery near $50-$250, while a heavy or crated shipment can cost $300-$1,000 or more. Confirm whether the delivery charge includes liftgate service, inside placement, or only curbside drop-off.
Routine parts vary by model and water conditions. Screens or disc stacks may cost $20-$500; seals and small service kits may run $30-$300. Controllers, motors, or larger assemblies can cost several hundred to a few thousand dollars. Ask the seller for part numbers and current replacement pricing before choosing between models.
Maintenance frequency depends on solids, operating hours, and the filter type. Manual units need inspection and cleaning as pressure loss indicates; automatic units still require periodic checks of flush cycles, sensors, and moving parts. Five-year ownership cost is therefore more than purchase price: include parts, labor, water used for flushing, and any production downtime.
Warranty coverage differs by product and seller, and may depend on correct installation and maintenance. Read the exclusions for wear parts, water chemistry, and electrical components. For an apples-to-apples budget, request equipment price, installation, expected service parts, freight, and warranty terms in writing.