A Kenmore washer Model 110 typically costs $100-$400 used, while a tested or refurbished machine may sell for $250-$600; many are older, discontinued models rather than new retail products. The final price depends on the full model number, condition, local availability, delivery, and whether the buyer needs repairs or parts.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Used Model 110 washer | $100 | $250 | $400 | Working machine, pickup usually extra |
| Tested or refurbished washer | $250 | $400 | $600 | Price may include limited warranty |
| Common repair visit | $100 | $225 | $450 | Diagnostic fee and repair scope vary |
| Replacement washer | $500 | $750 | $1,200 | Comparable new top-load machines |
| Common replacement part | $15 | $75 | $250 | Part-only pricing; labor is additional |
What a Kenmore 110 washer costs to buy today
The Model 110 prefix identifies a broad family of Kenmore washers, not one exact configuration or price. Many were manufactured years ago, and the full model number is needed to confirm capacity, parts compatibility, and age. A local listing may describe a washer as “Kenmore 110” even when it is a different generation from another machine with the same prefix.
For a working used washer, budget about $100-$400 before delivery; $250 is a reasonable middle-of-the-market planning figure. Lower-priced machines often come from private sellers, have cosmetic wear, or must be collected by the buyer. Higher-priced listings are more likely to include testing, delivery, or a short seller warranty. These are typical planning ranges, not guaranteed prices; local supply and condition can move the quote substantially.
Some retailers and appliance dealers sell refurbished or reconditioned units for approximately $250-$600 when available. A like-for-like new washer is generally not a new Model 110: buyers comparing replacement prices should expect roughly $500-$1,200 for a new basic-to-midrange top-load washer, before some delivery, installation, or haul-away charges.
Assumptions: U.S. dollars, standard-capacity top-load washer, working condition, and no unusual stairs, plumbing changes, or major part failure.
How age, capacity, and condition change the asking price
The full model number, usually found beneath the lid or on the cabinet label, matters more than the “110” prefix alone. It can help identify the washer’s production period and compatible components. Sellers should provide a photo of the complete label and a short demonstration of a wash and spin cycle. Without those checks, a low asking price may conceal a drain, agitation, or electrical fault.
Condition creates the biggest price spread. A clean, fully tested unit with hoses and a documented repair can reasonably command more than a machine sold untested. Rust around the cabinet, a damaged lid, loud spin operation, leaks, or a musty odor can justify a lower offer, especially if the buyer must arrange transport and disposal.
Capacity and feature differences also affect comparisons. A basic older top-loader should not be priced like a newer washer with a larger tub, energy-saving cycles, or a manufacturer-backed warranty. Ask whether the listed price includes the drain hose, fill hoses, and delivery; replacement hoses or a trip to collect the appliance can add $20-$60, and local delivery commonly adds $50-$150.
Before paying, match the full model number and test the machine under load if possible. A short empty spin test may not reveal a tub bearing or suspension problem that appears with wet laundry. If testing is not possible, price the purchase as an uncertain-condition appliance rather than as a proven working unit.
What repair labor and common parts add to the quote
A repair estimate commonly combines a diagnostic or service-call charge, labor, and parts. A service visit may cost $75-$150, and appliance labor often runs $75-$125 per hour, with minimum charges that can apply even to quick repairs. Some companies credit the diagnostic fee toward approved work; others charge it separately.
| Repair item | Parts | Labor | Typical total | When it applies |
|---|---|---|---|---|
| Lid switch or lock | $15-$80 | $75-$150 | $100-$250 | Washer will not start or spin |
| Drain pump | $35-$120 | $100-$200 | $150-$350 | Water remains in tub |
| Drive coupler or belt | $15-$75 | $100-$200 | $125-$300 | Agitation or spin failure |
| Water inlet valve | $25-$100 | $75-$175 | $125-$300 | Slow fill or no water flow |
| Gearcase or major drive work | $150-$350 | $200-$400 | $350-$750 | Major noise, leak, or drive failure |
Actual pricing depends on the exact washer and part source. A technician may find that a symptom has multiple possible causes, so a phone estimate is not a firm quote. The following rough calculation helps explain labor charges:
Ask for an itemized estimate that separates diagnosis, parts, labor, and any return-trip fee. Confirm whether the quoted part is new, used, or aftermarket, and whether the repair includes a workmanship or parts warranty. A low parts-only price is not comparable to a completed repair quote.
Which Model 110 failures cross the repair threshold
The most useful comparison is the total repair quote against the cost of a tested replacement washer, not the price of a part by itself. A $150-$250 repair can be practical on a clean washer with a straightforward fault. A $350-$750 major drive or tub repair may be difficult to justify when a comparable used unit costs $250-$400 and a new basic washer is available for around $500-$1,200.
Age and repair history matter. If the washer has already needed several repairs, a new failure may signal that more components are nearing the end of their service life. Conversely, a machine with a relatively simple switch, hose, or pump issue may be worth fixing if the tub and cabinet are sound and the repair includes a warranty.
When the diagnosis is uncertain, get the service charge and likely repair range before authorizing work. Some technicians charge a fee if the customer declines the repair. Compare the total out-of-pocket amount—including delivery and old-appliance removal—with the repair quote.
A useful decision point is a repair estimate near half the price of a suitable replacement. That is not a universal rule: a lower repair may still be poor value if the washer has multiple symptoms, while a higher repair may be sensible if replacement delivery is difficult or the machine is otherwise in excellent condition.
Three realistic budgets for buying or fixing one
These examples show how transport and labor change the apparent Model 110 price. Local quotes, full model number, and condition can produce different totals.
| Scenario | Price details | Estimated total |
|---|---|---|
| Private-sale pickup | $175 washer + $25 hoses; buyer transports | $200 |
| Tested machine delivered | $350 washer + $90 delivery + $25 hoses | $465 |
| Repair existing washer | 1.5 hours at $100/hour + $65 pump + $95 visit | $310 |
The repair example assumes that the diagnostic fee is separate and that the pump diagnosis is correct. If the service company applies the visit charge toward labor, the total may be lower; if a second visit or additional part is needed, it may rise. Verify whether tax, delivery, and installation are included in any seller’s advertised price.
Compare complete totals rather than listing prices. A $100 washer with no testing and buyer-arranged transport can cost more in time and risk than a $350 unit that has been tested and delivered.
How delivery and regional labor shift the final bill
Appliance prices and repair rates vary by local supply, contractor availability, and travel distance. Large metro areas may have more used listings but also higher delivery and service charges. Rural buyers may find fewer choices and face a longer technician trip or delivery surcharge. As a planning estimate, repair labor can run roughly 10%-25% above national middle-range figures in expensive metro markets, while less competitive rural areas may still charge more when travel is substantial.
Used listings in areas with plentiful rental turnover or appliance resale shops may be about 10%-20% below prices in markets with limited supply. The reverse can happen when demand is high or the washer is being sold with delivery and a short warranty. These percentage differences are broad budgeting estimates, not fixed regional rates.
Moving a washer requires safe transport and secure positioning. Delivery often costs $50-$150 for a straightforward local trip, with extra fees possible for stairs, long carries, or remote locations. Installation may cost another $50-$150 if the seller or retailer offers it. Old-unit haul-away can add about $25-$75, though some retailers include it with a new appliance purchase.
Request a delivered-and-installed total before comparing a seller’s price with a retailer’s price. Also confirm that the washer will fit through doors and hallways and that the existing hookups are in usable condition.
Ways to lower the price without accepting a risky washer
For a used purchase, ask for the complete model number, age if known, repair history, and a video showing fill, agitation, drain, and spin. A simple test reduces the chance of buying a machine that needs immediate service. Avoid paying extra for cosmetic improvements if the unit has no meaningful warranty or the seller cannot demonstrate operation.
Compare at least two or three listings and include delivery, hoses, and disposal in the total. If the buyer can safely collect the machine, pickup may avoid a $50-$150 delivery charge. Do not attempt transport without appropriate help and equipment; washers are heavy, and improper handling can cause injury or damage.
For a repair, request a written diagnosis and ask whether a lower-cost compatible part is available, what warranty applies, and whether the technician’s fee is credited toward the job. Replacing a single failed component can cost less than replacing the washer, but a major repair on a heavily worn unit may simply defer another expense.
Keep the purchase decision tied to verified condition and the full delivered cost. A low price is useful only when the washer works, the model is identifiable, and the buyer can get it connected without unexpected charges.
When a new top-load washer is the cheaper long-term choice
A new basic top-load washer commonly costs $500-$800 before optional services, while midrange models may be $800-$1,200 or more. Retailer delivery, installation, and old-machine removal can add roughly $75-$250 combined, depending on the package and site conditions. That upfront cost is higher than most used Model 110 listings, but it generally buys a new appliance, current documentation, and a manufacturer warranty.
Compare warranties carefully. A private seller may provide no coverage; a refurbisher may offer a limited 30- to 90-day warranty, while new appliances commonly include a limited manufacturer warranty whose terms differ by brand and component. A warranty does not necessarily cover installation problems, misuse, or all labor charges.
Energy and water use can affect ownership cost, but savings depend on household size, wash frequency, utility rates, and the specific models being compared. A replacement decision should account for the repair quote, likely delivery charges, warranty, and expected remaining service life rather than assuming every new washer will quickly pay for itself.
Choose a new replacement when a major repair, repeated failures, or uncertain condition makes the used washer’s total cost approach the price of a warranted machine. For a tested, inexpensive Model 110 with a minor repair need, keeping the older washer can still be the lower-cost option.