The cost of an Andersen 100 Series sliding door varies by size, finish, glass options, and installation details. This article breaks down typical pricing, key drivers, and practical ways to budget accurately for a new or replacement door in the United States.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Door unit price | $1,400 | $2,300 | $3,000 | Standard 6’8″ x 6’8″ with basic glass |
| Delivery & handling | $50 | $150 | $300 | Depends on distance from supplier |
| Installation labor | $500 | $1,200 | $2,000 | Per door, includes sill and flashing |
| Permits & inspections | $0 | $100 | $500 | Regional variation |
| Glass upgrades | $150 | $350 | $700 | Enhanced or tempered options |
| Finishes & hardware | $0 | $200 | $500 | Hardware upgrades add cost |
Typical price range for Andersen 100 Series sliding doors by size
Prices usually scale with door width and height, with standard sizes costing less than oversized units. A common residential setup is a 6’8″ wide by 6’8″ tall unit. For that size, the door itself typically lands in the $1,400–$2,300 range, with higher-end hardware or glass options pushing toward $3,000. For larger or custom heights, expect higher pricing in the $2,200–$3,400 band just for the door component, before labor or extras.
Major cost components in an Andersen 100 Series quote
Understanding each cost block helps compare quotes more accurately. The main components are Materials (the door unit, glass, hardware), Labor (removal of old door, framing, and installation), Delivery/Handling, and Permits if required. The table below outlines typical allocations you might see on a formal estimate.
| Cost Component | Low | Average | High | Notes |
|---|---|---|---|---|
| Door unit | $1,400 | $2,100 | $3,000 | Standard configuration |
| Labor | $500 | $1,200 | $2,000 | Includes removal and finish trim |
| Glass upgrades | $150 | $350 | $700 | Low-E or tempered panes |
| Hardware & finishes | $0 | $200 | $500 | Floor pivots, handles, color |
| Permits | $0 | $100 | $500 | Regional requirement |
| Delivery | $50 | $150 | $300 | Distance dependent |
How door size, glass, and finish influence price
Size, glazing choices, and exterior finish all push price in distinct ways. A wider or taller unit increases material and possibly hardware counts. Premium glass like double pane with Low-E coatings adds $150–$350 per unit, while tempered glass can add $100–$250. Exterior finishes such as darker veneer or anodized aluminum accents tend to add $100–$300, depending on the selected color or texture. In contrast, standard clear glass with white trim remains at the lower end of the spectrum.
Regional price differences and regional labor markets
Prices vary by climate zone and installer availability. In the Northeast and West Coast, door units plus installation can run higher due to labor rates and permit costs, often adding 5–15% compared with the Midwest or South. For a typical 6’8″ x 6’8″ Andersen 100 Series, expect door-and-install combined ranges around $2,000–$4,500 in higher-cost regions, versus roughly $1,800–$3,200 in lower-cost markets.
Ways to cut costs without sacrificing essential performance
Smart planning can trim the total without weakening function. Choose standard glazing, avoid premium finishes, and reuse or reuseable framing where permissible. Scheduling installation during a slower workload window can reduce labor surcharges. If existing framing is compatible, skip extensive removal or structural work. Bundling removal of an old unit with the new install often lowers labor time per unit and reduces trip charges.
Common add-ons and their typical costs
Each add-on changes the project total in predictable ways. Upgrading glass to double-pane Low-E can add $150–$350, while upgrading hardware (handles, finger pulls) adds $100–$400. Weatherstripping upgrades or foam-insulated sills can add $50–$150. Optional exterior trim or color-matched finishes may add $100–$300. If a contractor provides a full multi-door system, consider potential bundled savings on freight and labor.
Installation timing, crew size, and what to expect on site
Labor timelines depend on opening size and site access. A single 6’8″ door usually takes 4–8 hours for installation when framing is straightforward. A two-door slider or triple-panel configuration can take 8–14 hours. If carpentry is needed to modify or repair framing, expect longer schedules and potential contingency charges. Scheduling during mild weather reduces weather-related delays and price volatility.
Substitutes and price comparisons: Andersen 100 Series vs. alternatives
Considering alternatives can clarify value and price gaps. A similar mid-range sliding patio door from another brand can be $1,100–$2,000 for the unit, with installation pushing totals higher or lower depending on labor rates. The Andersen 100 Series often commands a premium for its build quality and warranty, but the overall installed price may still be competitive when factoring in long-term energy performance and durability. A side-by-side quote helps reveal true value differences.