The Price Pfister 910-900 replacement cartridge or valve assembly is commonly priced with a modest kit cost plus labor. The total price typically reflects the part cost, regional labor rates, and any required seals or adapters. The Price Pfister 910-900 cost can vary by region and service scope, but a practical range helps budget accurately.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Cartridge/Valve Assembly (910-900) | $20 | $35 | $60 | OEM replacement part |
| Labor for Installation | $120 | $180 | $250 | Includes basic shutoff and reseating |
| Seal Kit & Hardware | $5 | $12 | $25 | O-rings, gaskets, mounting screws |
| Travel/Service Call | $0 | $20 | $60 | Nearby markets may waive minimums |
| Disposal/Old Part Recycling | $0 | $5 | $15 | Typically optional |
Price Pfister 910-900 components that shape the total price
Typical total price combines the cartridge cost, labor, and any small parts needed for a proper seal and fit. The breakdown below uses common U.S. market assumptions: standard bathroom faucet, one handle, no custom plumbing changes. The table shows per-unit pricing and a simple quote layout.
| Component | Low | Average | High | Notes |
|---|---|---|---|---|
| OEM 910-900 Cartridge | $20 | $35 | $60 | Original Price Pfister part |
| Labor Time (hours) | 1.0 | 1.5 | 2.0 | Typical install duration |
| Hourly Labor Rate | $60 | $90 | $125 | Regional variance |
| Seal Kit & Hardware | $5 | $12 | $25 | Includes o-rings and gaskets |
| Service Call/Travel | $0 | $20 | $60 | Extra in rural zones |
Key variables that drive the Price Pfister 910-900 quote
The strongest price levers include the faucet type and the site conditions. Pipe access, cabinet clearance, and existing valve compatibility directly affect whether extra labor or adapters are needed. Quantified drivers include cartridge size and installation complexity, with typical ranges shown below.
- Cartridge compatibility: standard 910-900 vs. older model adapters
- Access constraint: recessed versus exposed sink plumbing
- Region: metropolitan areas show higher labor rates than rural markets
- Water pressure and flow testing: minor tests may add time and cost
Regional price differences for the 910-900 replacement
Prices in coastal cities tend to run higher due to labor and parts surcharges, while inland markets may be more affordable. The ranges below reflect typical U.S. region brackets for a single-handle bathroom faucet cartridge replacement.
| Region | Low | Average | High | Notes |
|---|---|---|---|---|
| West Coast Urban | $180 | $230 | $320 | Labor/inflated material costs |
| Midwest Suburban | $140 | $190 | $260 | Balanced pricing, standard parts |
| Northeast Rural | $120 | $170 | $240 | Travel impact may apply |
| South | $110 | $160 | $230 | Generally lower overhead |
Labor time expectations for installing the 910-900
Standard installation usually takes about 1 to 2 hours for a straightforward cartridge swap. In tight spaces or with corroded fittings, expect 2 to 3 hours. Scheduling a same-day service is common in many markets, though some regions have longer windows during busy seasons.
Different material and accessory options that affect price
Some customers opt for silicone sealants, anti-corrosion tablets, or premium finishing components. Basic OEM seals keep costs down, while upgraded hardware may raise prices by a modest margin depending on manufacturer compatibility and finish (chrome, brushed nickel, etc.).
Scenario: replacing 910-900 during a remodel vs. a leak repair
In a remodel, parts and labor may justify a bundled price, including shutoff valve checks and a quick faucet re-seat. For a leak repair, additional time may be needed to locate a pinhole or assess cabinetry damage. The price range reflects the broader scope in remodels versus repairs.
Warranty and service terms that influence total cost
Most Price Pfister components carry a limited warranty, typically covering defects for a period after installation. Warranty status can affect the price quote, as some contractors offer extended coverage for a higher labor or parts fee.
Cost-saving approaches specific to the 910-900 purchase
Practical reductions come from choosing standard finishes, confirming cartridge compatibility before scheduling, and comparing quotes that include labor time estimates. Bundling a reseat or single-handle upgrade with the same visit can reduce per-project overhead.
Practical quotes: three real-world examples with specs
Example A: 910-900 cartridge, standard chrome finish, single-handle, urban setting. Parts: $35; Labor: $170; Travel: $20; Total: $225.
Example B: 910-900 with premium nickel finish, mid-size home, rural setback. Parts: $50; Labor: $190; Travel: $40; Total: $280.
Example C: Retrofit kit with adapters, leak behind wall, complex access. Parts: $60; Labor: $210; Travel: $0; Total: $270.
How to compare quotes for Price Pfister 910-900 work
Request itemized bids that separate parts, labor, travel, and any disposal fees. Check if the quote includes testing for leaks and securing shutoff valves. A lower first price may hide hidden charges for access or return trips.