A Clean Burn waste oil furnace typically costs about $8,000-$18,000 for the furnace and $12,000-$28,000 installed, depending on heating capacity, venting, storage, and site work. Clean Burn waste oil furnace price quotes vary by model and region, and used-oil handling requirements can add substantial expense.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Furnace equipment | $8,000 | $12,000 | $18,000 | New unit; capacity and included accessories affect price |
| Installed project | $12,000 | $19,000 | $28,000 | Typical straightforward shop installation |
| Oil tank and delivery setup | $500 | $1,500 | $4,000 | Tank size, piping, and containment vary |
| Annual service | $250 | $500 | $900 | Cleaning and inspection; repairs extra |
What a New Clean Burn Furnace Costs for a Shop
For a small or mid-size garage with standard access, budget $12,000-$20,000 for a new furnace, basic venting, and professional installation. Larger spaces, higher-capacity equipment, or extensive chimney work can push the complete project to $20,000-$28,000 or more. Equipment-only pricing commonly falls around $8,000-$18,000, before freight, tax, installation, and fuel-system work.
A practical planning allowance is about $19,000 for a standard new installation. That assumes a suitable electrical supply, a code-compliant location, a short vent route, and no major building modifications. Request a model-specific quote because package contents and dealer pricing differ.
Assumptions: U.S. pricing, standard materials, typical shop access, and no major structural or electrical upgrades.
How Burners, Venting, and Labor Shape the Quote
Ask for an itemized estimate that separates the furnace from installation work. Some proposals include a tank or exhaust components; others price them separately. The ranges below are planning estimates, not a manufacturer price list.
| Quote component | Typical price | What changes the charge | Unit or scope |
|---|---|---|---|
| Furnace and burner package | $8,000-$18,000 | Capacity, controls, and included accessories | Per unit |
| Labor and commissioning | $1,500-$4,000 | Crew size, setup, testing, and access | Usually 12-30 hours |
| Chimney and vent materials | $1,000-$4,500 | Route length, diameter, and roof work | Per job |
| Tank, pump, and oil lines | $500-$4,000 | Storage capacity and containment needs | Per system |
| Electrical and permits | $300-$2,000 | Panel work and local requirements | Per job |
Venting and tank work can account for several thousand dollars beyond the furnace itself. Labor estimates may be lower for a simple replacement in an existing compliant space and higher when the installer must route a new flue or reposition equipment.
BTU Capacity and Oil Storage Can Change Equipment Pricing
Furnace size should follow the building’s heat loss, not just its floor area. Common commercial and garage applications may require roughly 140,000-500,000 BTU per hour, but insulation, ceiling height, air leakage, and winter temperatures change the load. A larger capacity can raise the equipment and venting budget; oversizing may also cause less suitable cycling.
Storage is another cost driver. A 250-500-gallon tank may suit some shops, while higher-volume operations may need greater capacity, additional containment, or a dedicated transfer setup. Longer oil lines, a tank placed far from the furnace, or difficult access can add hundreds to several thousand dollars.
Get the installer’s sizing calculation and confirm the proposed model’s accepted fuel specifications. Used oil may require screening or settling, and fuel quality affects system setup and maintenance.
Installation Labor Often Takes One to Three Days
A straightforward installation may take a two-person crew about 12-20 hours, while a project involving new venting, electrical changes, or tank placement can require 20-30 hours or more. At an illustrative $75-$125 per labor hour, two workers for 16 hours represent $2,400-$4,000 before equipment, materials, travel, and any subcontractors.
Compare labor scope, not just the quoted hourly rate. Estimates should state whether startup, combustion testing, thermostat wiring, fuel-line setup, and owner instruction are included. Remote sites may also incur travel or minimum-service charges.
Rural and Urban Installation Quotes Differ by Access
Labor and delivery commonly vary by 10%-25% between markets, though local dealer availability can matter more than a broad regional average. Urban projects may cost more for labor, permits, or restricted work access; rural buyers may face longer freight distances, travel charges, or fewer qualified installers. These are useful estimating adjustments, not guaranteed regional price rules.
Use local written quotes to validate a national budget range. Ask whether freight, tax, crane or lift access, and disposal of existing equipment are included before comparing totals.
Tank, Chimney, and Code Work Can Add to the Total
Common extras include a new storage tank, secondary containment, oil filtration, a longer exhaust run, roof flashing, electrical circuit work, or removal of an old heater. These items can add $500-$6,000 depending on scope. A difficult roof penetration or a noncompliant existing flue may cost more than routine vent materials.
Permit rules vary by city and county. Before purchase, confirm local requirements for combustion equipment, exhaust termination, used-oil storage, and fire separation with the building or fire department. Used oil can be subject to handling rules, so confirm what fuel the equipment may legally burn at the site.
Have the installer identify code-related upgrades in writing before work begins. That helps distinguish required work from optional improvements.
Three Shop Quotes Show How Project Scope Drives Price
A small 1,500-square-foot garage with an existing usable vent route might total $13,500: $9,500 equipment, $2,500 labor for about 20 crew-hours, and $1,500 for basic setup. A 3,000-square-foot repair shop needing a new tank and flue could reach $20,000: $12,500 equipment, $3,000 labor, and $4,500 in tank and vent materials.
A 6,000-square-foot shop with longer venting, electrical work, and difficult access might total $27,000: $16,000 equipment, $4,000 labor, and $7,000 for site and system work. These examples assume no unusual structural changes, and actual sizing must be verified.
The lowest equipment price is not necessarily the lowest installed price. Compare the same model capacity, vent scope, storage setup, startup, and warranty coverage across bids.
Control the Furnace Budget by Limiting Unneeded Work
Provide installers with the same building dimensions, ceiling height, insulation details, and intended operating schedule. Keep existing venting only if it passes inspection and suits the selected furnace. Choose tank capacity based on expected oil use and delivery logistics rather than buying the largest option by default.
Get at least three itemized bids and ask whether service, commissioning, delivery, and disposal are included. Avoid comparing a bare equipment quote with a complete installation package. Used equipment may lower the purchase price, but inspect burner condition, controls, parts availability, and warranty before treating it as a saving.
Scope control and comparable bids are the most reliable ways to prevent surprise charges. Confirm the final model, all included accessories, permit responsibility, payment schedule, and change-order rates before approving the work.