A new Hot Spring Jetsetter LX typically costs about $13,000-$18,000 before unusual site work, with a delivered-and-installed average near $16,000. The final quote depends on dealer package, electrical work, access, delivery distance, and whether the spa is new, floor-model, or used.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| New spa price | $13,000 | $15,500 | $18,000 | Dealer pricing and included accessories vary |
| Electrical and placement | $500 | $1,500 | $4,000 | Higher for long wiring runs or difficult access |
| Installed project | $13,500 | $17,000 | $22,000 | Excludes major deck or concrete construction |
| Used or floor model | $5,000 | $9,000 | $14,000 | Condition, age, and warranty affect value |
What a Jetsetter LX costs as a three-person spa
The Jetsetter LX is a compact, three-person Hot Spring spa, commonly listed around 7 feet by 5 feet 5 inches and roughly 29 inches high. For a new model, a reasonable planning range is $13,000-$18,000 for the spa itself; a typical quote lands around $15,500. Dealer quotes may include a cover, steps, chemicals, delivery, or startup, so the sticker price is not always an apples-to-apples comparison.
Budget approximately $16,000-$19,000 for a straightforward new-spa purchase with standard delivery and setup. A difficult electrical route, crane placement, or new pad can push the total above $20,000. Assumptions: U.S. dealer sale, standard color and configuration, normal ground-level access, and no major landscaping.
How the spa, wiring, and delivery shape the quote
Quotes vary in what they bundle. The spa is usually the largest line item, while site preparation and electrical service can add substantially when they are not included. Ask whether delivery means curbside drop-off or placement, leveling, filling, and startup.
| Cost component | Typical price | What changes the charge |
|---|---|---|
| Jetsetter LX spa | $13,000-$18,000 | Dealer, package, promotion, and inventory |
| Electrical work | $500-$2,500 | Panel capacity, wiring distance, and electrician rates |
| Delivery and placement | $300-$1,200 | Distance, stairs, tight access, or special equipment |
| Pad or base preparation | $300-$1,500 | Existing level concrete or new gravel/concrete work |
| Steps, cover lifter, and startup supplies | $250-$1,000 | Included package versus separately purchased items |
Get the included-items list in writing before comparing the bottom-line price. Electrical work commonly covers a dedicated circuit and disconnect, but the exact requirements depend on the spa configuration and local code.
Which electrical and access details raise Jetsetter LX pricing?
Electrical scope is a major variable. A short run from a suitable service panel may cost $500-$1,000; a 30- to 60-foot run, panel upgrade, trenching, or code corrections can raise the bill to $1,500-$4,000 or more. Confirm the specific model’s voltage requirements and have an electrician verify the circuit before delivery.
Access matters because the spa must reach its final location without damage. A clear, level path may be included in delivery, while narrow gates, multiple steps, overhead obstacles, or a crane can add hundreds to several thousand dollars. A base also needs to support the filled spa and occupants; an uneven lawn is not a reliable substitute for a prepared pad.
Measure the route and ask for an in-person or photo-based access review before accepting a delivery quote. Site conditions can change the total more than small differences in accessory pricing.
Why regional Jetsetter LX quotes differ
Dealer labor, freight, competition, and local demand create regional variation. As a rough comparison, metropolitan markets with several dealers may quote near the middle of the national range, while remote areas can run 5%-15% higher because of freight and service travel. High-cost coastal cities may also price 5%-15% above a Midwest baseline, though promotions and dealer inventory can reverse that gap.
Sales tax is additional where applicable and depends on local rules; on a $15,500 spa, an 8% rate adds $1,240. Delivery outside a dealer’s normal service territory may have a separate mileage charge. Compare delivered totals, tax treatment, and warranty service rather than using the spa-only price to judge regions.
How long installation takes and what labor includes
With a prepared pad and completed electrical circuit, placement and startup may take a few hours. Electricians commonly charge about $75-$150 per hour, with many uncomplicated spa hookups taking 4-8 hours of labor; longer wire runs or service upgrades can require a full day or more. The electrician and spa delivery crew may be separate contractors.
Ask the dealer whether installation includes leveling, filling, water testing, cover setup, and a walkthrough. If any item is excluded, budget separately rather than assuming “delivery” includes a complete installation. Electrical scheduling should be confirmed before the delivery date to avoid rescheduling fees or an unusable spa sitting onsite.
New, floor-model, and used Jetsetter LX prices compared
A floor model or prior-year new unit may sell for $10,000-$15,000, depending on condition, accessories, and remaining warranty. A used Jetsetter LX often lists around $5,000-$10,000, while exceptionally clean, newer units with documented service can approach $14,000. Moving a used spa and reconnecting it may add $500-$2,000, and warranty coverage may not transfer fully.
Before buying used, check for leaks, heater operation, pump noise, shell damage, control errors, and service records. A low purchase price can disappear if pumps, controls, or plumbing need repair. Compare the used spa’s purchase, inspection, move, and repair costs with a discounted floor model that includes dealer support.
Ways to lower the installed Jetsetter LX price
Request itemized quotes from at least two authorized dealers and compare the same spa configuration, delivery scope, electrical allowance, cover, steps, and warranty. Ask about floor inventory, seasonal promotions, or prior-year models; confirm that any discount does not remove useful service or warranty coverage.
Prepare a level, accessible location before delivery and have the electrician assess the panel early. Avoid paying for accessories that are not needed, but do not cut costs by skipping a properly sized circuit or stable base. The most controllable savings usually come from a simpler delivery route, prepared site, and clearly defined dealer package—not from leaving essential installation work out of the quote.