Concrete fence panels typically cost $90-$200 per linear foot installed, with many standard residential projects averaging about $135 per linear foot. Panel height, decorative finish, access for equipment, post installation, and local labor rates have the biggest effect on the quote.
A 100-foot, 6-foot-high fence commonly totals $9,000-$20,000 before unusual site work. Compare quotes using the same fence length, height, finish, and removal scope.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Installed concrete fence | $90/linear ft | $135/linear ft | $200/linear ft | Typical 6-foot residential fence |
| 100-foot project | $9,000 | $13,500 | $20,000 | Standard access and site conditions |
| Precast panel | $100 each | $225 each | $400 each | Varies by size, thickness, and finish |
| Concrete fence post | $50 each | $100 each | $175 each | Before installation |
What a 6-foot concrete fence costs per linear foot
For a basic 6-foot precast system, installed pricing often falls between $90 and $200 per linear foot. A plain panel with standard posts and uncomplicated ground conditions usually lands near the lower or middle part of that range. Textured or patterned panels, taller sections, and premium colors can push the rate higher.
At about 6-8 feet wide per panel section, a 100-foot run may need roughly 13-17 sections, plus posts, caps, and any gate openings. Assumptions: 6-foot fence, standard precast panels, normal access, and no major grading or demolition. Installed linear-foot pricing is the most useful starting point, but a written quote should list its included work.
How panels, posts, labor, and delivery shape the quote
Concrete fencing is heavy, so the delivered material price and equipment needed to place panels can be significant. The following ranges show typical cost components for a 100-foot, 6-foot fence; actual quotes vary with panel spacing and site access.
| Quote component | Low | Average | High | Common basis |
|---|---|---|---|---|
| Panels and posts | $4,000 | $7,000 | $11,000 | $40-$110 per linear ft |
| Labor and installation | $3,000 | $5,000 | $7,000 | $30-$70 per linear ft |
| Delivery and equipment | $500 | $1,200 | $2,500 | Crane, forklift, and delivery distance |
| Removal and disposal | $0 | $1,000 | $3,000 | $0-$30 per linear ft |
| Permits and site work | $0 | $500 | $2,000 | Local approval and ground preparation |
Labor commonly represents a substantial part of the total because posts must be set accurately and panels positioned with lifting equipment. Ask whether equipment, delivery, cleanup, and old-fence removal are included or billed separately.
Panel height, finish, and terrain change the final price
Height is a major price driver: moving from a 6-foot fence to an 8-foot model can add roughly 15%-35%, depending on panel design and local rules. A longer or thicker panel may also require heavier posts, larger footings, and more capable lifting equipment.
Decorative stone textures, molded patterns, and custom colors may cost 10%-30% more than basic gray panels. Sloped or rocky ground can require stepped sections, excavation, or additional concrete. If a run exceeds 150 feet, confirm that the estimate accounts for corners, end posts, and any changes in elevation. Height and ground conditions can change both material quantities and installation labor.
Regional labor and delivery rates across the United States
Prices in high-cost metro areas and parts of the Northeast or West Coast may run 15%-30% above a comparable rural or lower-cost-market quote. Rural jobs can have lower labor rates but higher delivery charges if the supplier or lifting equipment must travel farther.
Freight matters because concrete panels are bulky and heavy. A nearby supplier may reduce delivery expense, while a remote site or difficult truck access can add several hundred dollars or more. Local wind exposure, frost depth, and property-line rules can also change post or footing specifications. Compare local quotes rather than treating a national average as a guaranteed price.
Installation time and equipment charges for precast sections
A straightforward 100-foot project may take a small crew about 1-3 days on site, not counting scheduling, permitting, or extensive excavation. A typical crew may include 2-4 workers, with a forklift, crane, or other lifting equipment used to position the panels safely.
Labor rates can range from roughly $50-$100 per worker-hour, although contractors often price the completed fence rather than hourly work. Narrow access, steep slopes, tree roots, or tight property lines can slow placement and increase equipment time. Ask how many workdays and equipment hours the estimate assumes.
Removal, gates, and difficult access add project charges
Removing an existing fence may add about $5-$30 per linear foot, depending on its material and whether concrete footings need to be broken out. A gate can add roughly $500-$2,500 or more, depending on width, hardware, and whether it is a matching precast design or a separate metal gate.
Delivery to a site without truck access may require extra handling or a smaller machine. Clearing brush, hauling soil, and correcting grade can also be separate line items. Permit charges vary widely by municipality; some projects require a zoning review or inspection, especially for taller fences or boundary locations. Request separate prices for gates, demolition, grading, and permit work.
Concrete panels compared with wood and masonry fencing
Installed wood fencing often costs less upfront, commonly around $25-$60 per linear foot, but needs more frequent staining, repair, or board replacement. Concrete panels generally cost more initially and can be a practical choice when durability, privacy, and lower routine upkeep are priorities.
Brick or block masonry may cost about $100-$300 or more per linear foot, depending on height, reinforcement, finish, and footing requirements. It offers a solid appearance but usually involves more labor. Concrete panels can provide a similar sense of separation with faster placement when site access is suitable. Compare the upfront quote with expected maintenance and repair over time.
Ways to lower a concrete fence panel estimate
Keeping the fence at 6 feet, choosing a standard finish, and using common panel dimensions can reduce custom fabrication and installation costs. Finalize the fence line before ordering so the supplier can minimize odd-size panels and unnecessary posts. If the existing fence is already removed, confirm whether self-managed demolition actually lowers the contractor’s quote.
Get at least three itemized estimates based on the same length, height, finish, gate count, and site preparation. Ask about delivery distance, equipment minimums, and whether minor grading is included. Avoid paying for decorative upgrades that do not serve a clear purpose, and check local height rules before ordering. Controlling scope and comparing equivalent quotes are the most reliable ways to prevent avoidable charges.