A concrete table and benches typically cost $1,500-$7,500 for a coordinated outdoor set, with custom or oversized installations often reaching $12,000 or more. Price depends on table dimensions, concrete finish, bench count, delivery access, and whether the pieces are freestanding or installed on a prepared base.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Concrete table and two benches | $1,500 | $4,000 | $7,500 | Standard residential set, before unusual site work |
| Concrete table | $700 | $1,800 | $4,000 | Typically 4-6 feet long |
| Concrete bench | $300 | $850 | $2,000 | Per bench; size and reinforcement affect price |
| Delivery and placement | $150 | $500 | $1,500 | Higher for crane or restricted access |
| Site base and anchoring | $200 | $700 | $2,000 | Depends on ground preparation and installation |
What a concrete table and bench set usually costs
For a typical backyard or patio, a standard table with two matching benches costs about $1,500-$7,500 installed. A middle-of-the-market budget is around $4,000 for a 4- to 6-foot table, two benches, a basic sealed finish, and ordinary ground access. Premium architectural sets and large dining configurations can exceed $12,000.
At retail, a small prefabricated table may start near $700-$1,200, while a heavier table with a refined finish commonly runs $1,500-$4,000. Benches often cost $300-$2,000 each. As a rough comparison, a complete set averages $150-$500 per seating place when the price is divided across a table and two to four seats.
Assumptions: U.S. residential pricing, standard gray or integral-color concrete, normal delivery access, and no major demolition or retaining work.
Budget about $4,000 for a midrange set with two benches and straightforward delivery. Custom molds, sculptural bases, unusually thick tops, and labor-intensive placement can move a quote well above that baseline.
How tabletop, bench, and delivery charges add up
Quotes may combine the furniture, freight, placement, and site work into one total. Asking for those items separately makes it easier to compare a local fabricator with a shipped product. The ranges below reflect common residential jobs; specialty finishes and difficult access can raise individual line items.
| Quote item | Typical low | Typical average | Typical high | What changes the charge |
|---|---|---|---|---|
| Table fabrication | $700-$1,200 | $1,500-$2,500 | $3,000-$5,000 | Length, thickness, mold complexity, finish |
| Bench fabrication | $300-$500 each | $650-$1,100 each | $1,500-$2,500 each | Length, backrest, reinforcement, edge detail |
| Delivery | $100-$250 | $300-$700 | $800-$2,000 | Distance, weight, truck access, lift equipment |
| Placement and assembly | $150-$350 | $400-$900 | $1,000-$2,500 | Crew size, stairs, crane, anchoring |
| Base preparation | $150-$400 | $500-$1,000 | $1,500-$3,000 | Excavation, gravel, pavers, drainage |
| Sealer and finish upgrades | $50-$150 | $200-$500 | $700-$1,200 | Color, polishing, stain resistance |
Concrete furniture is heavy, so a low product price does not guarantee a low installed total. A 6-foot table can weigh several hundred pounds, and the seller may require a delivery crew, lift gate, or specialized placement equipment.
For planning, placement labor may run $75-$150 per worker-hour, often with a two-person crew and a minimum service charge.
Freight and placement can account for $300-$1,500 or more of the final bill. Confirm whether the quote includes unloading, moving pieces to the patio, assembly, and removal of packaging.
Which slab dimensions and finishes raise the price?
Size is one of the clearest price drivers. A 4-foot table is usually less expensive and easier to deliver than a 6- or 8-foot slab. A top thicker than about 2 inches, an overhanging edge, or a cantilevered design can require additional reinforcement and a stronger base. Bench length and the number of seats also affect material use and handling.
Finish options create a second tier of price differences. Standard gray concrete with a simple sealed surface generally costs less than integral pigment, exposed aggregate, polished faces, custom inlays, or a hand-ground edge. Expect a basic color or finish upgrade to add roughly $100-$500 per piece; intricate custom work can add $500-$2,000 or more to a set.
Reinforcement and design matter as well. Steel reinforcement or fiber additives may be specified to reduce cracking risk, especially for slender pieces or long spans. They do not make concrete maintenance-free, and the fabricator should explain the design and care expectations rather than treating reinforcement as a substitute for proper support.
Moving from a 4-foot standard top to a 6- or 8-foot custom slab can add hundreds or thousands of dollars. Ask for the actual dimensions, thickness, approximate weight, finish, and whether the quoted set includes matching benches.
Why delivery access and ground preparation change installation costs
Concrete pieces are awkward as well as heavy. A clear driveway close to a level patio may allow delivery with a lift gate and a small crew. Narrow gates, stairs, long carry distances, soft lawn, or a backyard with no equipment access can require extra workers or a crane. Depending on the obstacle, difficult placement may add $300-$2,000 or more.
The furniture needs a stable, reasonably level surface. A compacted gravel pad may cost $150-$500 for a small area, while pavers or a poured pad can cost $500-$2,000 or more, depending on size and local labor. Sloping or poorly drained ground may need grading or drainage work. These costs are separate from the table unless the seller explicitly includes them.
Existing patios can reduce prep costs, but the installer should check for uneven areas and verify that the route can accommodate the pieces. If the set will be anchored, confirm whether the hardware and drilling are included and whether the patio material is suitable for anchoring.
Access and a level base can matter as much as the furniture price on a difficult site. Share gate widths, stair counts, carry distance, surface type, and photos with bidders before requesting a firm quote.
How regional freight and labor rates shift the quote
Regional pricing varies with labor rates, local fabricator availability, freight distance, and demand for custom outdoor work. As a broad planning adjustment, a set delivered in a major coastal metro may run 10%-25% above a comparable quote in a lower-cost inland market. Rural buyers may see lower labor rates but higher freight or a delivery minimum because the route is longer.
Local production can reduce shipping distance, but it is not automatically cheaper. A nearby shop may charge more for custom molds or hand finishing, while an out-of-state seller may have lower product pricing but higher freight and unloading fees. Compare the delivered and placed total, not only the advertised set price.
Urban delivery can involve parking restrictions, timed loading, permits for street access, or a smaller truck that makes multiple trips. In rural areas, poor roads or long distances from the main route can trigger a mileage surcharge. These differences commonly add $100-$800, though exceptional access issues can exceed that range.
Compare quotes using the same dimensions, finish, number of benches, and delivery scope. Ask whether taxes, fuel surcharges, placement, and site preparation are included; otherwise, an apparently cheaper bid may not represent the lower final price.
What three realistic set quotes include
A small, prefabricated set might include a 4-foot table and two simple backless benches. The furniture could cost $1,600-$2,600, with $250-$500 for delivery and placement, for a total near $1,850-$3,100. This assumes a nearby drop-off, an existing level patio, and no premium surface treatment.
A midrange custom set with a 6-foot table, two 5-foot benches, and a sealed, lightly colored finish could total $3,500-$6,500. A sample quote might include $3,600 for fabrication, $450 for delivery, $650 for a two-person placement crew, and $400 for a small gravel or paver adjustment. Labor may take 3-6 hours after arrival, depending on access.
A premium installation could include an 8-foot table, three long benches, polished or custom-colored surfaces, and a crane-assisted placement. Fabrication might run $7,000-$11,000, with $1,000-$2,500 for delivery and equipment and $500-$1,500 for site work. The total may reach $8,500-$15,000 or higher when the design is unusually heavy or the site needs substantial preparation.
Example labor calculation: 2 workers × 5 hours × $100 per hour = $1,000 before equipment, travel, or minimum charges.
Three bids are most useful when they price the same table length, bench count, finish, and placement conditions. A fabricator should identify whether the listed amount is for the furniture alone or includes the set installed in its final location.
When concrete beats wood, stone, or metal furniture
Concrete is a substantial, weather-resistant choice, but it is not always the lowest-cost option. A comparable wood patio set may cost $500-$2,500, and a metal set may cost $400-$2,000, depending on material and construction. Natural stone or designer outdoor furniture can meet or exceed concrete pricing, particularly when delivery is difficult.
Concrete may make sense when a fixed, heavy set is desirable and the patio can support it. It is less convenient when furniture must be moved seasonally or stored indoors. Replacing a damaged concrete piece can be expensive because hauling and matching the finish may cost more than a simple repair.
Minor surface chips or hairline cracks may be repairable for roughly $150-$600, depending on the location and finish match. A badly cracked tabletop, unstable base, or extensive spalling may require replacement. Ask the seller whether repairs are possible and whether a patch will remain visible.
Compare lifetime convenience as well as the initial invoice. Concrete usually needs little routine care, but buyers pay upfront for its weight, fabrication, and delivery rather than for easy rearrangement.
How to lower the concrete furniture bill without cutting quality
Choose standard dimensions and a common finish before requesting custom colors, molded edges, or embedded details. Keeping a table at 4-6 feet and selecting a familiar gray or earth-tone finish can avoid custom mold and finishing charges. Limiting the set to the number of benches needed now also prevents paying for unused seating.
Reduce delivery complexity by clearing the route, measuring gates, and preparing a level landing area before the crew arrives. If practical, place the set near the delivery vehicle rather than at the far end of the yard. Do not move heavy pieces without suitable equipment and enough trained people; damage or injury can erase any savings.
Request separate prices for furniture, delivery, placement, base work, and finish upgrades. Compare at least three written quotes, and ask whether a standard model is available locally. If an existing patio is sound and level, avoid paying for a new pad; if the ground is unstable, skipping a proper base may lead to rocking or cracking.
The most controllable savings usually come from standard sizing, simpler finishes, and an easy delivery route. Keep structural support and safe handling in the scope, and remove optional upgrades rather than necessary installation work.
What buyers should confirm before accepting a price
Confirm the full dimensions, thickness, number of pieces, finish, and approximate weight. Check whether the price covers freight to the property, unloading, movement to the final patio, assembly, anchoring, and packaging removal. Ask for a written charge if stairs, a crane, or extra carry distance may apply.
Clarify taxes, deposits, cancellation terms, production lead time, and the process for damage during delivery. For custom work, ask what happens if the delivered color or dimensions differ from the approved specification. A warranty may cover workmanship or structural defects but exclude ordinary staining, freeze damage, or misuse; terms vary by maker.
Concrete can develop small surface variations, and outdoor exposure may affect color over time. Ask what sealer is used, whether resealing is recommended, and what cleaning products should be avoided. A sealer upgrade may cost $100-$500 for a set, with later maintenance commonly priced by the piece or service call.
A complete written quote should state exactly what is being made, delivered, and installed. Clear scope helps prevent last-minute charges and makes competing bids comparable.