The cost to install cabinets in a laundry room typically ranges from $900 to $6,000, with many projects landing near $2,500. The final price depends mainly on cabinet length and construction, installation labor, removal of old units, and whether plumbing or electrical work is needed.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Installed project | $900 | $2,500 | $6,000 | About 6-12 linear ft of stock to semi-custom cabinets |
| Cabinet materials | $400 | $1,400 | $4,000 | Particleboard or laminate through custom wood |
| Installation labor | $350 | $800 | $1,800 | Access, wall condition, and fitting affect hours |
| Per linear foot installed | $100 | $250 | $600 | Approximate rate; finish and scope vary |
What laundry-room cabinet installation costs for a typical room
For a straightforward room with 6-12 linear feet of cabinets, homeowners commonly pay $1,500-$3,500 for stock or semi-custom units installed. A small run of basic wall cabinets may cost $900-$1,600, while a larger arrangement with base cabinets, a countertop, and finished panels can reach $3,000-$6,000. Fully custom cabinetry or complicated utility clearances can exceed that range.
A practical planning figure is about $200-$350 per linear foot installed for standard, midrange cabinets. This assumes existing laundry hookups remain in place, walls are in usable condition, and no major carpentry or finish upgrades are included. Assumptions: typical U.S. labor rates, standard cabinet sizes, normal access, and no plumbing relocation.
How cabinet materials, installation labor, and delivery shape quotes
Cabinet estimates often combine the cabinet purchase with fitting and job-site charges. Confirm whether the quote includes fillers, trim, hardware, sales tax, and disposal; a low cabinet-only price is not the same as an installed total.
| Quote component | Low | Typical | High | What it covers |
|---|---|---|---|---|
| Cabinet materials | $400 | $1,000-$2,000 | $4,000+ | Stock, semi-custom, or custom units |
| Labor | $350 | $600-$1,200 | $1,800 | Layout, leveling, fastening, and trim |
| Delivery | $75 | $150-$300 | $500 | Distance, stairs, and handling |
| Removal and disposal | $100 | $250-$500 | $900 | Old cabinets and related debris |
| Countertop or accessories | $150 | $400-$900 | $1,500 | Counter, pull-out, shelving, or hardware |
Labor commonly runs $50-$100 per hour, but installers often quote the whole project rather than an hourly rate. A one-person installer may need 6-12 hours for a simple cabinet run; two-person crews can complete lifting and alignment faster, though crew size does not necessarily lower the total charge.
Which wall length and cabinet depth change the price most
Length is a major cost driver: adding 4 linear feet can add roughly $400-$2,400 installed, depending on cabinet grade and whether the run needs matching end panels or a countertop. A 6-foot run of stock wall cabinets is substantially less expensive than 12 feet of base and upper cabinets with trim and finished sides.
Depth and layout matter in a compact laundry room. Standard wall cabinets are often about 12 inches deep, while base cabinets are typically 24 inches deep. Cabinets deeper than 24 inches, custom widths, or units fitted around a washer, dryer, sink, or sloped ceiling can require custom work. Correct clearances for appliance doors and dryer vent access should be checked before ordering.
Expect a noticeable quote increase when the project shifts from standard widths to custom sizing or adds more than 10-12 linear feet. Water-damaged walls, uneven floors, and missing wall studs may also require repair or extra blocking before secure mounting.
What installers charge for measuring, mounting, and finishing
Professional installation generally includes measuring, locating studs, leveling, fastening cabinets, and adjusting doors. A basic installation may take 6-10 labor hours; a room with several cabinet runs, scribing, or trim work can take 12-20 hours. At $50-$100 per hour, those hours represent about $300-$2,000 in labor, though minimum service charges and fixed bids may change the calculation.
Some contractors charge $150-$400 for a site visit or detailed measurement, often crediting it toward the job if hired. Ask whether the estimate includes assembly of flat-pack cabinets, installation of handles, caulking, and final cleanup. Painting, wall repair, and countertop installation may be separate trades or line items.
How Midwest and coastal installation quotes compare
Labor and delivery rates vary by market. In lower-cost rural and Midwest areas, a comparable project may price about 5%-15% below the national middle range. Major coastal metros and high-cost cities can run 15%-30% higher, particularly when contractor schedules are tight or parking and building access add time.
These percentages are planning estimates, not fixed regional tariffs. Cabinet brand, local competition, and job complexity can outweigh geography. Compare at least three written quotes with the same cabinet style, linear footage, removal scope, and finish details to identify a true price difference.
How removal, fillers, and utility changes add to the bill
Removing existing cabinets can add $100-$900, depending on quantity, wall damage, and disposal fees. Fillers, toe kicks, crown molding, and finished end panels may add $100-$600 or more. A basic countertop can add $150-$700; sink cutouts, backsplash, or premium surfaces increase the total.
Moving a washer hookup, drain, outlet, or dryer vent is usually outside a cabinet installer’s base price. Plumbing or electrical changes can add several hundred dollars, while extensive rerouting may cost $1,000 or more. Verify whether permits or licensed trade work are required locally before approving changes.
When stock cabinets beat custom laundry-room storage
Stock cabinets are generally the lowest-cost option, often $100-$250 per linear foot installed. Semi-custom options commonly run $200-$450 per linear foot, while custom cabinetry may reach $400-$800 or more per linear foot. Custom work can solve unusual dimensions, but it is not automatically worthwhile when standard units fit around appliances and utility connections.
For example, a 6-foot stock wall-cabinet run with simple installation might total $900-$1,600. An 8-foot mix of stock base and wall units with a basic counter may land around $2,000-$3,500. A 12-foot semi-custom layout with trim, removal, and a countertop can reach $4,000-$6,000. These examples assume ordinary access and no utility relocation.
Where to trim the laundry cabinet budget without losing function
Keep the cabinet layout close to standard widths, retain existing plumbing and electrical locations, and choose stock finishes when they fit the room. Open shelves above appliances can replace a short stretch of upper cabinets at lower material and labor cost. Reuse a sound countertop or handles if their dimensions and condition suit the new layout.
Compare itemized installed quotes, not cabinet prices alone. Check cabinet construction, hardware, delivery, removal, fillers, countertop work, and warranty terms side by side. Avoid paying for custom sizing or premium upgrades unless they solve a specific storage, clearance, or durability problem.