Dunn-Edwards Evershield 5 gallon price typically ranges based on finish, retailer, and regional taxes. Buyers should expect a price in the low hundreds per 5-gallon container, with variations driven by color, primer compatibility, and supplier promotions. This article presents concrete cost ranges, per-gallon equivalents, and practical budgeting guidance for the exact Dunn-Edwards Evershield 5 gallon purchase.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| 5 Gallon Evershield price | $300 | $380 | $520 | Typical retail pricing before discounts or tax |
| Per-gallon price (approx.) | $60 | $76 | $104 | Based on 5-gallon price divided by 5 |
| Coverage (per gallon) | 250–300 sq ft | 300 sq ft | 350 sq ft | Based on standard interior/exterior application |
| Total area covered (5 gal) | 1,250–1,500 sq ft | 1,500 sq ft | 1,750 sq ft | Assumes two coats and proper surface prep |
| Typical tax | $0–$20 | $20–$40 | $40–$60 | Depends on location |
Assumptions: Midwest labor rates, standard surface prep, typical flat or smooth finishes, no special colorant costs.
What buyers usually pay for Dunn-Edwards Evershield 5 Gallon
The exact price for a 5 gallon bucket of Dunn-Edwards Evershield depends on finish type (eggshell, satin, flat), tinting requirements, and retailer promotions. Typical total price ranges from about $300 to $520 per 5-gallon pail. In most markets, expect around $60-$104 per gallon when calculated from the 5-gallon price. Color-matching or primer compatibility can add a small surcharge, while bulk purchases or contractor pricing can push the unit price down.
Breakdown of major cost components in the quote
For a standard residential job using Evershield 5 gallon, the quote commonly includes the following components.
| Component | Low | Average | High | Notes |
|---|---|---|---|---|
| Materials | $300 | $380 | $520 | 5 gal can, finish, tinting |
| Labor for prep and painting | $250 | $420 | $750 | Surface sanding, priming, two coats |
| Equipment rental (if needed) | $0 | $20 | $60 | Rollers, brushes, sprayer usage |
| Delivery/Fees | $0 | $15 | $50 | Regional delivery or curbside |
| Waste disposal | $0 | $10 | $40 | Hazardous or paint waste handling |
| Permits (if required) | $0 | $0 | $0–$25 | Typically none for interior; exterior may vary by locale |
Formula example: Estimated labor hours × hourly rate
Which price drivers most impact the Dunn-Edwards Evershield 5 gal quote
Several factors shift final pricing. The strongest drivers include the size of the project and the chosen finish. Two coats on a medium-sized exterior with standard finish may push price toward the average range. Regional tax, color tinting needs, and accessibility also materially influence totals. Projects with high or irregular surfaces (extensive trim, gutters, or textured walls) tend to increase both material waste and labor hours.
Regional price differences you should expect
Paint pricing in the U.S. varies by region due to taxes, freight, and retailer competition. In the West and Northeast, 5-gallon Evershield may trend toward the upper end of the range, while Southeast markets can be slightly lower on average. Expect roughly a 5–15% spread between low-cost and high-cost regions. Bulk contractor pricing can narrow these gaps when purchasing direct for a multi-room project.
Labor considerations that affect total cost for a 5 gallon purchase
Labor often dominates the budget when upgrading interior or exterior surfaces. Typical scenarios include two-coat finishes and thorough prep. Labor for a mid-size home (1,500–2,000 sq ft) commonly adds $400–$900 over material costs. Faster crews or sprayer application can raise efficiency but may incur slightly higher equipment or set-up fees.
Ways to reduce the Dunn-Edwards Evershield 5 gallon cost without compromising quality
Cost-conscious choices can stay within budget while preserving performance. Choose a standard finish and avoid premium tinting beyond a basic color match. Schedule work in off-peak seasons, buy all materials from the same retailer for possible discounts, and combine prep work to minimize repeated visits. If a full 5-gallon is unnecessary, consider matching cans for touch-ups to reduce waste.
Scenario: two-coat exterior project on a 1,600 sq ft home
For an exterior application with two coats, 5 gallons typically cover about 1,500–1,750 sq ft. Estimated total price range: $360–$520 for materials, plus $300–$700 for labor depending on access and prep. Surface conditions, such as peeling paint or deep stucco, can increase both material waste and labor hours.
Example quotes: real-world ranges for planning
Below are typical quote shapes buyers might see. Each item reflects a different scenario to help budgeting.
- Interior walls, standard finish, 1,200 sq ft, two coats: Materials $300–$360; Labor $320–$520; Total $640–$880.
- Exterior siding, medium texture, 1,800 sq ft, two coats: Materials $420–$520; Labor $520–$900; Total $940–$1,420.
- Small bathroom upgrade, 250 sq ft, two coats on primed walls: Materials $210–$260; Labor $180–$320; Total $390–$580.
Color and finish choices that alter price for Evershield 5 gal
Some finishes or colorants add cost. Gloss or satin finishes may command a modest premium over flat finishes, while specialized color blends can add $10–$40 per gallon. Tinting that requires advanced color matching or custom pigments tends to raise the per-gallon price slightly versus standard stock colors.
Delivery timing and scheduling impact on cost
Supply availability and delivery windows can influence total cost through rush fees or extended project timelines. Standard delivery typically adds $0–$50; expedited delivery may add $20–$100. Scheduling during busy seasons can affect crew availability and overall project duration.