A used Delta bench band saw typically costs $75-$250, with an average price near $150 for a working 9-inch model. Age, completeness, motor condition, included blades, and local availability drive the price; many Delta benchtop models are discontinued, so condition matters more than a current retail list price.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Nonworking or incomplete saw | $25 | $60 | $100 | May need parts or a motor repair |
| Working used 9-inch saw | $75 | $150 | $250 | Typical local private-sale range |
| Clean, tested, ready-to-use saw | $175 | $275 | $400 | Higher end needs strong condition or accessories |
| Replacement blade | $10 | $18 | $30 | Price varies by length and tooth style |
What a working Delta 9-inch bench band saw costs
Most price comparisons involve a compact Delta 9-inch benchtop saw, often an older 28-185 or similar model. A basic used unit with a working motor and no major damage commonly sells for $75-$200. A clean, tested saw with its fence, table, guards, and stand or mounting hardware can reach $200-$300, while $300-$400 is less common and should come with unusually good condition or useful extras.
A practical target is about $125-$200 for a complete saw that runs smoothly and tracks its blade correctly. These estimates assume a local pickup, ordinary wear, and no professional restoration. A seller’s asking price may exceed the amount a buyer ultimately pays, especially when the saw needs tuning or replacement parts.
Assumptions: U.S. local sale, standard used condition, pickup rather than shipping, and a 9-inch benchtop model.
How motor, frame, and blade condition shape the quote
A used saw’s price depends on more than whether its switch turns on. A motor that starts reliably, a table that tilts and locks, intact blade guards, and smooth wheel rotation all support the asking price. Cracked plastic, a bent table, missing covers, excessive vibration, or a blade that drifts can justify a discount because replacement parts and troubleshooting take time.
| Quote component | Low | Average | High | What changes the amount |
|---|---|---|---|---|
| Used saw body and motor | $75 | $150 | $250 | Working condition and completeness |
| Blade and basic setup | $10 | $25 | $45 | Blade size, tooth pitch, and tuning |
| Replacement tires or small parts | $15 | $35 | $70 | Model compatibility and part availability |
| Local delivery or hauling | $0 | $25 | $60 | Distance, vehicle, and seller assistance |
Bench saws are small enough for many buyers to transport, but shipping can erase the savings on a low-priced listing. Before paying, confirm that the model label is legible and check whether essential guards, guides, and table hardware are present.
Missing parts can turn a bargain into a costly project, particularly when model-specific components are hard to find.
Which 9-inch specs and condition change used price
Blade length and compatibility are important: a replacement blade must match the saw’s specified length, width, and intended cut. A common small-saw blade may cost roughly $10-$30, but buyers should verify the exact model requirements rather than assume blades interchange across Delta machines. Also check the saw’s stated cutting capacity; a 9-inch frame is not comparable to a larger 14-inch floor-standing bandsaw.
Condition thresholds help explain price differences. A motor that runs for several minutes without unusual noise is more reassuring than one that only starts briefly. A table with no visible bend and a tilt mechanism that locks securely supports a higher value. If the wheels wobble, the blade wanders during a test cut, or the motor stalls in modest stock, budgeting $30-$100 for parts or repair is prudent.
Confirm the model number and make a test cut before paying the premium for a “ready to use” listing. A brief no-load run alone does not prove that the guides, blade tracking, and motor perform properly under cutting load.
Should you repair a Delta bench saw or buy another?
Small fixes can make sense when the frame, wheels, table, and motor are sound. A new blade and adjustment may cost $15-$45 in parts, while replacement tires or guide components can raise the parts bill to about $30-$100. If the motor is failing or several parts are missing, compare the total repair estimate with the price of a complete working used saw rather than evaluating each part separately.
Repair is usually easier to justify when the saw needs one modest fix and costs at least $50 less than a comparable working unit. A larger or newer bandsaw may offer more cutting capacity, but its purchase price, footprint, and possible delivery expense are not directly comparable to a compact Delta bench model.
Three Delta listing examples and their likely totals
A $60 as-is saw with a worn blade might require $20 for a blade and $30 for pickup, producing an estimated $110 outlay before any repairs. A tested $150 saw with a complete fence and guards could cost about $175 after a $25 replacement blade. A clean $275 listing with a stand and accessories may reach $300 after a small setup purchase, but only if those extras are useful and the saw passes a cutting test.
Compare the all-in amount, not just the listing price. These examples assume local purchases and exclude sales tax where applicable; a delivery fee, repair, or missing component can change the total quickly.
How repair hours and local availability affect the total
Basic inspection and setup may take 30-90 minutes for a buyer familiar with small shop tools. Replacing a blade and adjusting guides can take roughly 30-60 minutes; diagnosing a motor or tracking problem can take several hours. A repair shop may charge around $75-$125 per hour, and its minimum diagnostic fee may make a low-value saw uneconomical to fix.
Prices also vary by market. In dense metro areas, more listings can improve selection, although clean equipment may carry a 10%-20% premium. Rural buyers may find lower asking prices but have fewer choices and longer pickup trips. Shipping a heavy or awkward used machine can cost more than expected, so local pickup is often the budget-friendly option.
Value the saw based on its condition and your local alternatives, not a single online asking price.
How to lower the price on a used Delta saw
Ask the seller to demonstrate the saw under power, inspect the blade path, and verify the table and guides before negotiating. Point to specific missing accessories, damaged guards, or a blade that needs replacement and estimate those expenses from actual parts prices. A polite offer can reflect the expected all-in cost without treating normal cosmetic wear as a major defect.
Buying a complete but dusty unit can be cheaper than paying extra for a fresh coat of paint or unverified restoration. If a seller cannot test the machine, price it as an as-is tool and leave room in the budget for inspection and repairs. Avoid paying for accessories that will not fit the buyer’s work or for a stand that is already available.
The strongest savings come from verifying function, controlling pickup costs, and setting a maximum price before negotiating.