A double wide garage door typically costs $1,200-$7,500 installed, with many standard replacements landing near $2,800. The double wide garage door cost depends mainly on door width and height, insulation, material, opener compatibility, labor, and whether the old door or tracks need removal.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Door and installation | $1,200 | $2,800 | $7,500 | Common 16-by-7-foot opening; basic to premium door |
| Door only | $700 | $1,800 | $5,000 | Material, insulation, finish, and size affect price |
| Installation labor | $400 | $700 | $1,300 | Higher for track changes or difficult removal |
| New opener, if needed | $350 | $650 | $1,100 | Installed; horsepower and drive type vary |
What a standard 16-foot garage door costs installed
A basic noninsulated steel door for a typical 16-by-7-foot opening may cost $1,200-$2,200 installed. A midrange insulated steel model commonly totals $2,000-$3,800, while premium carriage-house designs, composite overlays, or custom finishes can reach $4,000-$7,500 or more.
For a straightforward replacement, budgeting about $2,000-$3,800 covers many insulated steel doors with standard installation. These estimates assume a conventional residential opening, ordinary access, and no major framing or electrical work. An 18-foot-wide door, a taller opening, or custom construction can add substantially to the total.
Assumptions: Typical U.S. residential pricing, standard opening, normal access, and existing framing in usable condition.
How steel panels, tracks, and labor shape the quote
Door quotes may bundle hardware and installation, so buyers should check whether the price includes tracks, springs, weather seals, disposal, and sales tax. The ranges below describe common charges for a replacement project; local labor and product specifications can move them.
| Quote component | Low | Average | High | Typical scope |
|---|---|---|---|---|
| Steel door panels | $700 | $1,500 | $3,000 | Basic to insulated 16-by-7-foot door |
| Tracks, springs, and hardware | $150 | $350 | $700 | New components or upgraded hardware |
| Installation labor | $400 | $700 | $1,300 | Removal, fitting, balancing, and testing |
| Removal and disposal | $75 | $175 | $350 | Old door and related debris |
| Opener replacement | $350 | $650 | $1,100 | Installed belt-, chain-, or screw-drive unit |
Ask for an itemized quote that separates the door, hardware, labor, and removal charges. Installation labor is often estimated at 4-8 hours for a standard replacement, although a two-person crew may complete the on-site work sooner.
Opening width, insulation, and material change the price
Width is a major price driver: a 16-foot door is common, while an 18-foot model usually costs more and may require heavier-duty hardware. A standard 7-foot height is generally less expensive than an 8-foot door; extra height can require longer tracks, additional panels, or a different spring setup.
Insulated steel doors often add roughly $300-$1,200 compared with basic noninsulated models, depending on construction and insulation value. Wood and composite designs can add $1,000-$4,000 or more over entry-level steel, especially with custom finishes. Window inserts, decorative hardware, and special colors may add $100-$800.
Measure the actual framed opening and compare insulation and construction specifications, not just the exterior style. A high wind-load rating, unusual panel design, or damaged jambs may require a higher-priced door or extra work.
What removal, track repairs, and opener work add
Removing and disposing of an existing door may cost $75-$350 if it is not included in installation. Replacing tracks or springs can add about $150-$700, while correcting a damaged header or jamb can range from a few hundred dollars to more than $1,500 depending on the repair.
An opener may be reused if it is compatible, properly functioning, and rated for the new door. A new installed opener often adds $350-$1,100; smart controls, battery backup, or a quiet belt drive can raise the price. Electrical upgrades or relocating an outlet are typically quoted separately.
Confirm whether the estimate includes safe spring handling, balancing, weather seals, and disposal. Existing torsion springs are under high tension, making removal a job for a trained installer rather than a routine DIY task.
Regional labor rates can shift a garage door estimate
Prices tend to run higher in major coastal metros and high-cost markets than in many rural or lower-cost areas. A similar project may be 10%-25% above a national baseline in expensive urban markets, while rural quotes can be 5%-15% lower, though travel charges may narrow the difference.
Weather exposure can also affect the selected specification. Coastal wind requirements, severe-weather reinforcement, and cold-climate insulation can increase product costs by roughly $200-$1,000 or more. Permit requirements vary by city and scope; where needed, fees may be about $50-$300, with structural changes potentially requiring additional review.
Compare local quotes for the same opening size, insulation, wind rating, removal, and warranty. A lower door-only price is not directly comparable with an installed quote that includes new tracks and disposal.
Three replacement quotes for common double-door setups
A basic 16-by-7-foot noninsulated steel replacement with existing tracks in usable condition might include 5 labor hours at $90 per hour, a $900 door, and $150 for removal, totaling about $1,500-$1,800 after hardware and local charges.
A midrange 16-by-7-foot insulated steel door with new hardware might use 6 labor hours at $110 per hour, a $1,800 door, and $350 in tracks and disposal, for a typical total around $2,700-$3,500. A premium 18-by-8-foot door with windows and a new opener could require 8 labor hours at $125 per hour and $4,000-$5,500 in products, putting the installed total near $5,500-$7,500.
These examples are planning ranges, not fixed bids; regional rates and site conditions can change each total.
When repairing the existing door costs less than replacing it
Replacing broken rollers, a cable, or a single damaged panel may cost about $150-$800, depending on parts and service fees. Spring replacement commonly falls around $200-$500 for a double door, while a new opener alone may be less expensive than a full door replacement if the panels and tracks remain sound.
Full replacement becomes more economical when several panels are damaged, the door is badly rusted, the tracks are failing, or the door is poorly balanced. A service diagnostic or trip charge may be $75-$150 and may be credited toward approved work.
Ask whether a repair restores safe operation and whether replacement parts remain available before approving a full-door quote.
How to lower the price without cutting necessary safety work
Keep the existing opening dimensions when possible, choose a standard steel finish, and avoid windows or decorative overlays that do not add needed function. If the opener still works with the new door, request a quote that excludes replacement and separately prices a compatible upgrade.
Get at least three itemized bids using identical specifications. Schedule nonurgent work during less busy periods if contractors offer flexible pricing, and ask whether old-door disposal or track replacement is optional. Do not reduce costs by reusing worn springs or attempting to install high-tension hardware without proper training.
The clearest savings usually come from controlling the door specification and scope, not skipping safe installation or required hardware.