A Graco FinishPro 395 typically costs about $1,500-$2,600 new, depending on the exact model, included accessories, and seller. The Graco FinishPro 395 price is driven by whether the package is an air-assisted airless system, what hose and spray-gun equipment it includes, and whether freight, tax, or replacement parts are added.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| New FinishPro 395 unit | $1,500 | $2,050 | $2,600 | Price varies by model and package |
| Used working unit | $700 | $1,150 | $1,700 | Condition and included gun affect value |
| Shipping and tax | $50 | $180 | $400 | Location, freight method, and sales tax vary |
| Typical new purchase total | $1,600 | $2,230 | $3,000 | Before optional accessories or service |
What a FinishPro 395 package usually costs
For a new machine, budget roughly $1,500-$2,600 before tax. The lower end may reflect a base package, sale pricing, or an older configuration; higher listings may include a gun, hose, tips, and other accessories. Verify the model name and included equipment because FinishPro 395 listings can describe different configurations, and the price of a bare or incomplete machine is not directly comparable with a ready-to-spray kit.
Assumptions: U.S. purchase, new equipment, standard seller warranty, and no unusually expensive freight. A realistic delivered budget is about $1,600-$3,000. A local quote can be lower if the seller offers pickup or a promotion, while sales tax and shipping may add several hundred dollars.
How the pump, gun, hose, and accessories shape the quote
The machine is the main expense, but package contents explain much of the difference between listings. The table gives typical retail allowances rather than guaranteed standalone prices; parts and kits vary by model and seller.
| Quote item | Low | Average | High | What changes the charge |
|---|---|---|---|---|
| Sprayer and pump assembly | $1,250 | $1,750 | $2,200 | Model version and package |
| Spray gun and hose | $150 | $300 | $500 | Gun type, hose length, fittings |
| Tips and filters | $30 | $90 | $180 | Tip size and number included |
| Freight and handling | $0 | $75 | $200 | Pickup versus shipped equipment |
| Tax and setup supplies | $50 | $150 | $350 | Local tax and cleaning supplies |
Compare the complete kit, not just the pump price. A lower listing can become more expensive if it omits the gun, hose, or compatible tips needed for the intended finish.
Which model details and spray setup raise the price?
Confirm the exact FinishPro 395 version, voltage, and included spray equipment before comparing prices. Model generations, package codes, and seller descriptions are not always presented consistently. A kit with a complete air-assisted airless setup can cost more than a listing for the sprayer alone, while a longer hose or additional gun may increase the total by $100-$400.
Tip size and coating type affect the accessories budget, not necessarily the base machine price. Fine-finish work may require appropriate fine-finish tips and filters, often adding $30-$180. For larger jobs, additional hose length or a second gun can add roughly $100-$500. Match the package to the coating and work area before paying for upgrades.
How much do delivery, service, and parts add?
Retail equipment pricing generally does not include jobsite labor. If a technician is asked to inspect, assemble, or troubleshoot the machine, service rates commonly run $75-$150 per hour, with a possible minimum charge of $75-$200.
Routine setup supplies such as cleaning fluid, filters, and protective gear can add $30-$120. A replacement gun, hose, or repair part can make a used-machine purchase less economical; allow $100-$500 for a modest repair, depending on the failed component and service labor. Ask whether the quote includes freight, setup, and warranty handling.
What does a used FinishPro 395 cost compared with new?
Used units commonly list for $700-$1,700, with the average near $1,150. A clean, tested machine with its original gun and hose tends toward the upper end; missing accessories, heavy wear, or unknown maintenance can reduce value. A refurbished unit may cost about $1,000-$1,900, depending on the seller’s inspection and warranty.
Before buying, ask for a demonstration with the pump primed and spraying, check for leaks, and confirm that pressure holds. Compare the used price plus any needed parts against the $1,500-$2,600 new range. A discount of only a few hundred dollars may not offset missing equipment or repair risk.
How do U.S. seller and shipping prices compare?
Local pricing can vary with dealer competition, inventory, and freight access. A dealer in a major metro market may offer a price 5%-10% below a higher-priced listing during a promotion; remote areas or sellers requiring freight may be 5%-15% above a comparable local pickup price. These are practical comparison ranges, not fixed regional markups.
Check whether listed prices include sales tax, delivery, and the same accessories. A $1,850 quote with a gun, hose, and local pickup may be a better value than a $1,700 online listing that adds freight and requires separate accessories. Compare delivered totals for identical model numbers.
When are repair parts cheaper than replacing the sprayer?
For a working pump with a limited issue, a repair may cost less than replacement. Minor service can run $100-$300, while more extensive pump or motor work may reach $400-$800. If the machine needs multiple major components, compare the repair estimate with the cost of a new unit and the value of a warranty.
Used machines with no test history should be priced with a repair reserve. A $900 purchase plus a $500 repair and $200 in missing accessories reaches $1,600, close to the low end of new pricing. Get a written diagnosis before committing to a costly repair.
How to lower the FinishPro 395 purchase total
Request quotes for the same model and accessory list from several sellers, and ask about open-box or refurbished stock with a stated warranty. Pickup can avoid freight, and buying only the tips and hose needed for the job can prevent paying for unused extras. Avoid comparing an incomplete base machine with a full package.
For occasional small projects, renting may cost roughly $75-$150 per day, plus cleaning supplies or deposits. Frequent professional use may justify buying, particularly when rental days and transport accumulate. Choose based on total expected use, included equipment, and service support—not the sticker price alone.