A used John Deere X720 typically costs about $5,000-$9,000, with clean, low-hour tractors and useful attachments sometimes listed above that range. Price depends most on condition, engine hours, mower deck size, included equipment, and local demand; the X720 is a discontinued model, so buyers are comparing used machines rather than current new inventory.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Used X720 tractor | $4,000 | $6,500 | $10,000 | Condition, hours, and location affect asking price |
| With mower deck | $4,800 | $7,500 | $11,000 | Deck condition and width matter |
| With several attachments | $6,000 | $9,000 | $13,000 | May include snow equipment or collection system |
| Pre-purchase inspection | $100 | $175 | $300 | Independent shop or mobile technician |
What a used John Deere X720 usually costs
Most buyers will see complete used X720s priced around $5,000-$9,000. A rough tractor needing tires, deck work, or engine repairs may fall near $3,500-$5,000, while a well-kept example with service records and a working mower deck can reach $8,000-$10,000 or more. Asking prices are not confirmed sale prices, and dealer listings may include inspection or limited warranty costs.
The X720 is a heavy-duty garden tractor with a 25-hp Kawasaki gas engine and hydraulic power steering. Common mower decks are 48, 54, or 62 inches, and attachments can substantially change the package value. Assumptions: used tractor in operating condition, ordinary access to parts and service, and no major engine or transmission failure. A complete, tested tractor with a sound deck is a more useful comparison than a low listing price alone.
How mower decks and attachments change the quote
For a used tractor purchase, the package price reflects both the machine and the condition or resale value of its accessories. The ranges below are approximate used-market values, not guaranteed trade-in credits; worn components can make an included attachment worth little until repaired.
| Quote component | Typical used value | Cost detail | Check before paying |
|---|---|---|---|
| X720 tractor | $4,000-$8,000 | Hours, tires, engine, hydraulics | Cold start and leak check |
| 48- or 54-inch deck | $500-$1,500 | Spindles, blades, shell condition | Engage blades and inspect underside |
| 62-inch deck | $800-$2,000 | Width and parts condition affect value | Confirm compatibility and operation |
| Snow blower or blade | $400-$1,500 | Attachment type and mounting hardware | Check lift and drive components |
| Collection system | $300-$1,200 | Complete bags and hardware add value | Verify all fittings are included |
Attachments should be valued separately because a seller’s package premium can exceed the cost of sourcing a used accessory independently.
Engine hours, deck width, and repair needs move prices
Hours provide a clue, not a verdict. A tractor under roughly 700 hours with maintenance records may command a premium, while one above 1,500 hours deserves closer scrutiny of engine condition, steering, transmission, and hydraulics. An X720 with a 62-inch deck may suit larger areas but can cost more and may be less convenient around tight landscaping than a narrower setup.
Repairs can erase the savings on a cheaper listing. A set of tires may run $300-$700 installed, deck spindle or belt work can range from $150-$600 depending on parts and labor, and a major engine or hydraulic repair can reach $1,000-$3,000 or more. Prioritize the condition of the engine, transmission, and deck shell over a low hour-meter reading.
Regional listings vary between rural and metro markets
Prices can run about 10%-20% higher in areas with strong demand for lawn and garden equipment, especially where clean used tractors are scarce. Rural buyers may find more machines and attachments locally, but transport can offset a lower asking price. In colder regions, snow attachments can support higher fall and winter package prices; in warmer areas, mower condition and cutting width may matter more.
Transport for a garden tractor commonly adds $100-$500 for a nearby delivery, with longer distances quoted separately. Dealer inventory may cost more than a private-party sale, but it can include setup, inspection, or a short warranty. Compare listings within a practical delivery radius and evaluate the full delivered price.
What inspection and shop labor add before purchase
A basic inspection may cost $100-$200, while a more detailed evaluation at a repair shop can reach $300 if diagnosis or compression testing is included. A mobile technician may charge a travel fee, and a shop may apply a minimum labor charge of $75-$150. Repairs are additional, so written estimates should distinguish inspection fees from parts and repair work.
For service work, independent small-engine or tractor shops often charge around $90-$150 per hour; dealer rates can be higher. Example: 2-4 hours of diagnosis and minor work at $100-$150 per hour equals $200-$600 in labor, before parts. Ask whether the inspection fee is credited toward approved repairs.
When repair costs make another X720 the better buy
Compare the asking price plus immediate repairs against a better-maintained tractor, rather than comparing sticker prices alone. A $4,500 machine needing $2,000 in repairs costs $6,500 before transport, while a tested $7,000 tractor may offer lower near-term risk. If the engine runs well but the deck is damaged, replacing or repairing the deck may be reasonable; engine, transmission, and hydraulic problems together can make a low-priced unit uneconomical.
Parts availability and shop familiarity vary by location for a discontinued model. Before committing to a major repair, get a written parts-and-labor quote and check whether the required component is available. Set a repair ceiling before purchase and walk away when essential repairs push the total beyond comparable working listings.
How to lower the X720 purchase price without missing problems
Request a cold start, a test drive, and a demonstration of the mower deck and hydraulics before negotiating. Bring a checklist of missing accessories, worn tires, leaks, uneven cutting, and overdue service; use documented defects to support a specific offer rather than relying on a general discount request. Compare at least three similar listings with the same deck size and broadly similar equipment.
Buying outside peak mowing season can improve negotiating room in some markets, although snow equipment may be in demand before winter. A tractor sold without a deck can be cheaper, but buyers should price a compatible deck and mounting parts first. The clearest savings usually come from buying only the attachments needed and avoiding a machine with expensive hidden repairs.
Three X720 purchase examples at different price levels
A private-party tractor with about 1,600 hours, a worn 48-inch deck, and no extra attachments might be listed near $4,500. Allow $250-$500 for inspection and immediate service, putting the initial budget around $4,750-$5,000 before any major repair. This is a higher-risk purchase despite the low entry price.
A maintained tractor with approximately 900 hours, a working 54-inch deck, and ordinary wear could sell around $6,500-$8,000. A $175 inspection and roughly $200-$500 for routine service bring the likely first-season spend to about $6,875-$8,675. A clean machine with a 62-inch deck, snow attachment, and service records may reach $9,000-$12,000, depending on local demand and accessory condition.
These examples are budget scenarios, not fixed market quotes. Condition, seller type, season, and included equipment can move the actual price outside the ranges shown.