A Land Pride FDR1672 finish mower typically costs about $3,200-$5,300 new, with a middle-of-the-range dealer price near $4,200; clean used units commonly list for $1,500-$3,300. The final price depends on dealer discounts, freight, condition, included PTO shaft, and whether the mower needs setup or repairs.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| New FDR1672 mower | $3,200 | $4,200 | $5,300 | Estimated implement price before tax and delivery |
| Used FDR1672 mower | $1,500 | $2,400 | $3,300 | Condition, age, and service history matter |
| Dealer setup and delivery | $100 | $250 | $500 | May be separate from the implement quote |
| Typical 72-inch mowing rate | $0.75 | $1.50 | $3.00 | Approximate cost per cuttable acre, excluding tractor ownership |
Assumptions: U.S. dealer pricing, standard 72-inch FDR1672 configuration, no unusual freight distance, and sales tax excluded.
What a 72-inch FDR1672 usually costs
The FDR1672 is a three-point, rear-discharge grooming mower with a nominal 72-inch cutting width. A reasonable planning allowance for a new unit is $3,200-$5,300 before tax, with about $4,200 as a practical midpoint. Dealer inventory, model-year changes, local discounts, and whether an advertised price includes freight can shift a quote outside that range.
For a new purchase, confirm the exact model and included equipment rather than comparing only the headline number. The mower, driveline, guards, setup, delivery, and tax may be priced separately. A quote of $4,200 with local delivery can be less expensive overall than a $3,850 listing that adds substantial freight and preparation charges.
Used pricing is usually driven more by wear and maintenance than by age alone. A functioning machine with intact decks, straight blades, a sound gearbox, and a usable PTO shaft may fall around $2,000-$3,300. Units with damaged tires, bent components, leaks, or missing driveline parts can be closer to $1,000-$1,800, but repairs can erase the apparent discount.
Price per cutting width is roughly $44-$74 per inch for the estimated new range. This is only a quick comparison measure: a mower’s deck design, durability, parts availability, and condition are not captured by that calculation.
How the dealer quote breaks down for the mower
A dealer’s price may combine the mower and preparation into one line or separate out delivery, setup, and accessories. Ask for an itemized written quote that identifies the FDR1672, what is included, and which charges are optional. Freight and dealer preparation can change the out-the-door price by several hundred dollars.
| Quote component | Typical range | What affects it | How to check |
|---|---|---|---|
| Mower implement | $3,200-$5,300 | Dealer stock, discount, model year | Confirm model and configuration |
| Setup and inspection | $75-$250 | Dealer labor and included preparation | Ask what work is already included |
| Freight or local delivery | $0-$500 | Distance, route, dealer policy | Compare pickup with delivered price |
| PTO shaft or replacement parts | $150-$500 | Included shaft, fit, and condition | Verify shaft is present and compatible |
| Sales tax | About 0%-10% of taxable amount | State and local tax rules | Use the purchase location’s rate |
At a $4,200 implement price, a 7% sales tax adds about $294. If delivery and setup together add $300, the estimated total reaches about $4,794. Registration is not generally a major cost for a standard mower implement, but local rules and the way the equipment is transported can differ.
Setup charges should be distinguished from repairs. Dealer setup may cover assembly, lubrication, blade checks, and adjustment. A used mower needing spindle work, new blades, or gearbox service has a separate repair budget and should be inspected before the sale is final.
Deck width, tractor power, and condition move the price
Model identification is important because nearby Land Pride grooming mower models can differ in width, discharge design, and intended tractor capacity. The FDR1672’s 72-inch deck is suited to a different mowing area and tractor setup than a narrower mower, and a seller’s description may not capture equipment substitutions or modifications. Confirm the nameplate and actual deck width before using a listing price as a comparison.
Tractor compatibility affects value because the mower needs an appropriate three-point hitch, PTO speed, and enough power for the grass and terrain. Check the operator manuals for the mower and tractor rather than relying solely on a seller’s estimate. A tractor near the lower end of the mower’s recommended power range may mow slowly in heavy growth; excess power does not correct poor setup or unsuitable ground conditions.
For a used machine, deck and spindle condition are major price drivers. Surface rust or faded paint may be cosmetic, while a visibly warped deck, loose spindle, damaged gearbox, or vibration can indicate costly work. Replacing routine wear items may cost a few hundred dollars, but major component repairs can approach or exceed $1,000 depending on parts and labor.
Blade condition also affects the working value. A set of replacement blades may cost approximately $60-$180, depending on parts and availability, while installation labor can add roughly $50-$150. Ask whether blades are included, whether they have been sharpened, and whether the mower has been run recently without unusual noise.
Freight distance and inventory status create another threshold. A unit located within a short local delivery area may incur little or no delivery charge, while a shipment of 100 miles or more can add several hundred dollars. Limited local stock may also reduce negotiating room, whereas a dealer with an in-stock unit or end-of-season inventory may offer a lower implement price.
Dealer labor and delivery can add $100-$500
Most buyers do not need a long installation project, but a new mower still requires assembly checks and correct connection to the tractor. Dealer preparation is often a short shop task rather than a full-day installation. If charged separately, allow $75-$250 for setup and inspection, and obtain a clear list of what the fee covers.
At a typical equipment-shop labor rate of $90-$150 per hour, one to two hours of setup or inspection represents $90-$300. The actual billed amount can be a flat fee, and some dealers include preparation in the price. Confirm before treating a low advertised amount as an installed or ready-to-use price.
Delivery is most economical when the dealer can combine it with other local deliveries. Local drop-off may cost $100-$250, while longer routes or special loading needs can reach $300-$500 or more. Pickup can save that charge if the buyer has a suitable trailer, safe tie-downs, and a vehicle with adequate capacity. Compare the delivered total, not just the mower price.
Used purchases may require more labor than new equipment. A pre-purchase inspection can take about 30-60 minutes and may be free, included in a service visit, or billed at the shop’s hourly rate. If the seller cannot demonstrate the mower running, budget for inspection and transport before assuming the machine is ready for work.
Three FDR1672 purchase examples show the total
These examples illustrate how the same model can produce different totals. They are planning estimates, not guaranteed dealer offers, and exclude tractor purchase, financing, and ongoing mowing fuel. Taxes and transport are often the difference between a listed price and the buyer’s actual check.
| Purchase scenario | Mower price | Other charges | Estimated total before tax |
|---|---|---|---|
| Local new unit, buyer pickup | $3,900 | $125 setup | $4,025 |
| New unit delivered 60 miles | $4,350 | $175 setup, $250 delivery | $4,775 |
| Used unit needing routine service | $2,100 | $125 inspection, $250 blades and service, $180 transport | $2,655 |
In the first example, 7% tax on $4,025 would add about $282, bringing the estimated total to roughly $4,307. Actual taxable charges depend on state and local rules. The delivered example would be about $5,109 after 7% tax if all listed charges are taxable.
For the used example, the $2,100 asking price is not the complete comparison. If inspection finds a damaged gearbox or bent deck, additional repairs could change the economics quickly. A buyer should compare the estimated repaired total with the cost of a better-maintained used mower and the dealer’s delivered price for a new unit.
New and used mower prices differ most at repair risk
A new FDR1672 usually costs more upfront but offers known condition, dealer support, and fewer immediate repairs. Used examples around $1,500-$3,300 can be a sound value when the deck is straight, the gearbox is quiet, the spindles turn smoothly, and the driveline is complete. A lower used price is only a savings if the mower does not need major repairs.
For an older unit, inspect the underside for cracks, severe corrosion, welds, and impact damage. Check each spindle for excess play, inspect belts for cracking, and look for oil leakage near the gearbox. Verify that guards and other safety components are present. A short test mow is useful because noise, uneven cutting, and vibration may not appear during a walk-around.
Repair-versus-replace decisions depend on the defect. Blades, tires, belts, and minor adjustments are normally manageable costs. A major gearbox or deck repair can cost several hundred dollars to more than $1,000 once parts and labor are counted. If several costly items are due at once, the buyer should compare the repair estimate against a different used machine rather than judging by the seller’s asking price alone.
Parts availability and dealer support can influence ownership costs. Before buying an older mower, ask a local Land Pride dealer whether common service parts are available and request current prices for blades, belts, and any suspected component. A limited parts issue may not matter for a mechanically sound machine, but it can extend downtime if the mower is needed during a short mowing window.
Regional quotes vary with freight and dealer inventory
There is no single national transaction price for the FDR1672. In areas with several equipment dealers and inventory nearby, buyers may receive quotes 5%-10% below a comparable high-demand market. Remote rural locations can run 5%-15% higher after freight, handling, or a dealer’s limited stock is considered. These are broad planning differences, not fixed regional markups.
Labor rates and sales tax also vary substantially. A shop in a large metro area may charge more per hour than a rural dealer, while rural transport can cost more because of distance. Sales tax is set by state and local rules and can add several hundred dollars to a purchase. Request a written out-the-door quote from dealers within a realistic pickup radius.
Compare quotes using the same assumptions: identical model, new or used condition, delivery location, included shaft, setup, and tax treatment. A dealer’s advertised price may be a special cash price or may exclude freight. Another quote could include preparation and delivery, making its headline figure appear higher while its final amount is lower.
Seasonal availability can affect bargaining more than a strict calendar discount. Spring demand may make popular implements harder to find, while a dealer clearing floor space or closing out inventory may be more flexible. Ask whether a quote is tied to a specific unit and how long the price is valid, especially if the mower must be ordered.
Control the final price with scope and quote checks
The most dependable savings come from controlling what is included. If a buyer can safely pick up the mower, compare that option with dealer delivery. For a used unit, pay for an inspection before agreeing to repairs, and separate required work from cosmetic improvements. Spend on mechanical condition and compatibility before appearance or nonessential upgrades.
Compare at least two or three itemized dealer quotes when practical. Ask each dealer to list the FDR1672 price, setup, delivery, included PTO shaft, tax, and any accessories. If one quote is higher, ask whether the difference reflects a delivery distance, added preparation, or a different model configuration. This prevents negotiating against an incomplete price.
Timing can help when a dealer has an in-stock mower or is making room for incoming equipment. Ask about current inventory and any price difference between an immediate pickup unit and a factory order. Do not delay a needed purchase solely for a possible discount: a limited mowing season, rental expense, or missed maintenance may outweigh a modest reduction.
For a used mower, negotiate based on documented defects rather than a general request for a lower price. Obtain parts estimates for worn blades, belts, tires, or other issues, then use those figures to assess the total. Avoid paying a premium for recent paint or a seller’s claim of light use without checking the deck, gearbox, spindles, and PTO shaft.
Finally, verify that the tractor’s hitch and PTO setup match the mower before purchase. A compatibility problem can require extra parts or dealer labor and may make a low price a poor fit. The budget should cover the machine in usable condition, delivery or pickup, tax, and any clearly identified maintenance—not just the amount shown in an online listing.