Lemurian Blue granite typically costs $120-$350 per square foot installed, with many standard kitchen projects landing near $200 per square foot. Slab rarity, blue mineral pattern, thickness, edge fabrication, project size, and local labor rates drive the final price.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Installed countertop | $120/sq ft | $200/sq ft | $350/sq ft | Stone, fabrication, and installation |
| Raw slab material | $60/sq ft | $110/sq ft | $200+/sq ft | Varies with color, pattern, and availability |
| Typical 40-sq-ft kitchen | $4,800 | $8,000 | $14,000 | Before unusual access or structural work |
Assumptions: U.S. pricing for a standard countertop installation with normal access; premium slabs and regional labor can exceed these ranges.
What a 40-Square-Foot Lemurian Blue Countertop Costs
For a typical kitchen with about 40 square feet of finished surface, a practical installed budget is $4,800-$14,000, with roughly $8,000 a common planning figure. That assumes a standard layout, selected slab, templating, cutouts, fabrication, and installation. A small vanity or island may have a higher per-square-foot rate because fabrication and trip charges are spread over less stone.
Quoted material prices often refer to the slab or square footage before cutting. A fabricator may charge for the whole slab rather than only the area used, especially when the layout cannot fit efficiently on remnants. Confirm whether the quote includes the slab, fabrication, sink cutout, delivery, and installation before comparing totals.
How Slabs, Fabrication, and Labor Shape the Quote
Stone selection is only one part of the estimate. A premium slab with striking blue iridescence or unusually consistent movement can cost substantially more than a less dramatic piece. Fabrication includes measuring, cutting, polishing edges, and making openings for sinks and cooktops.
| Quote component | Typical price | What changes it | Common billing basis |
|---|---|---|---|
| Slab material | $60-$200+/sq ft | Grade, pattern, slab yield | Sq ft or full slab |
| Fabrication | $25-$60/sq ft | Edges, seams, cutouts | Sq ft or task fee |
| Installation labor | $15-$35/sq ft | Weight, stairs, access | Sq ft or crew charge |
| Delivery and removal | $150-$600 | Distance and old-counter disposal | Per project |
| Sink or cooktop cutout | $150-$400 each | Opening type and finish | Per cutout |
Labor estimates depend on the crew and site. provides a simple way to check a labor line item; countertop crews may bill through a project price rather than showing an hourly rate. Ask for separate material, fabrication, and installation charges so unusual fees are visible.
Why Slab Size, Thickness, and Pattern Change the Price
Slab dimensions and usable yield can determine whether a project needs one slab or more. A 25-square-foot job may still require buying a full slab if remnants are unavailable or the pieces cannot be laid out together. A kitchen exceeding about 45-55 square feet, or one with a large island, may need multiple slabs and additional matching effort.
Standard 3-centimeter stone generally avoids the extra build-up work sometimes used with thinner material. A thickened edge, waterfall island, or long unsupported span adds fabrication and may require cabinet reinforcement. Bold directional movement can also increase waste because the fabricator may need to align the pattern across seams. Request a slab-viewing or layout approval when color placement matters, and ask how many slabs the estimate assumes.
Which Choices Can Reduce the Granite Installation Bill
Keeping the existing cabinet layout usually avoids extra cutouts, plumbing changes, and finish repairs. A simple eased edge costs less than elaborate profiles, while standard straight runs are easier to fabricate than many short sections. Choosing a slab with enough usable area and a less demanding pattern can reduce waste.
Remnants may work for a vanity, bar, or small island, but availability of Lemurian Blue varies. Compare the remnant’s actual dimensions and color with the finished design rather than assuming a lower grade will match the main counters. Get at least three written quotes based on the same slab, thickness, edge, sink, and backsplash scope. Do not compare a material-only price with an installed quote.
How Regional Labor and Delivery Affect Blue Granite Pricing
Installed rates in major coastal cities and high-cost metro areas can run about 10%-25% above a national midrange estimate. Smaller markets may be 5%-15% lower when local fabricators have competitive labor and stone access, but remote delivery can offset the savings. Prices also vary by region because exotic slabs may need to travel from a distant distributor.
Ask whether the fabricator has the slab in a local warehouse or must arrange transfer. A long haul, difficult unloading, narrow stairways, or elevator restrictions can add $200-$1,000 or more to a project, depending on distance and crew requirements. Compare the delivered, installed total rather than the advertised slab rate.
Three Lemurian Blue Countertop Quotes to Compare
These examples show how layout and scope affect a quote; they are not guaranteed local prices. Each assumes ordinary access and no cabinet repair.
| Project | Scope | Estimated total |
|---|---|---|
| Small vanity | 8 sq ft, remnant stone, one sink cutout, basic edge | $1,200-$2,200 |
| Standard kitchen | 40 sq ft, one slab allowance, sink and cooktop cutouts | $6,000-$10,000 |
| Large kitchen with island | 65 sq ft, multiple slabs, seams, upgraded edge | $11,000-$22,000 |
The standard-kitchen estimate averages about $150-$250 per square foot once fabrication and installation are included. A large island may raise the total through slab requirements and pattern matching rather than square footage alone. Check whether each quote includes tax, backsplash, sink installation, and removal of existing counters.
When Removal, Backsplash, or Special Edges Add Fees
Removing and disposing of old countertops commonly adds $5-$15 per square foot, with heavier stone or difficult access costing more. A matching granite backsplash may add roughly $20-$50 per linear foot, depending on height and finishing. Polished edges beyond the included basic profile may add $10-$30 per linear foot.
Template visits are often included in a full installation, but remote trips or return visits can carry a fee. Plumbing reconnection may be excluded and cost $150-$500 when handled separately; electrical or cabinet changes are additional. Have the installer identify exclusions and site conditions in writing before approving the order.