Mobile home window prices typically range from $150 to $900 per window, including installation, with many standard replacements averaging $350 to $600. Frame material, window size, access, regional labor rates, and whether the opening needs repair can shift the final quote.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Window unit | $75 | $250 | $650 | Vinyl, aluminum, or specialty sizes |
| Installed replacement | $150 | $475 | $900 | Per window, standard opening |
| Large or specialty window | $450 | $850 | $1,500 | Oversized, custom, or difficult access |
| Whole-home project | $900 | $3,800 | $9,000 | Six to ten windows; scope varies |
What standard mobile home window replacement costs
For a common 30-by-36-inch or similarly sized opening, a replacement window often costs $75 to $400 for the unit and $75 to $250 for installation. A typical complete job falls between $250 and $650 per window when the existing frame is sound and no major trim or wall repair is needed.
Budget about $350 to $600 per standard window for a straightforward, professionally installed replacement. A six-window project may total $1,500 to $3,900, while replacing eight windows can run $2,000 to $5,200. These examples assume standard vinyl units, ordinary ground-level access, and no structural damage.
Assumptions: U.S. average labor rates, standard replacement sizes, ordinary access, and no major wall or frame repairs.
How window units, labor, and trim shape the quote
Contractors may price the unit, removal, installation, and finishing separately or provide one installed figure. Comparing itemized estimates helps show whether a low quote excludes disposal, trim, flashing, or sealing work.
| Quote component | Typical price | What it covers | When it rises |
|---|---|---|---|
| Window unit | $75-$400 each | Standard vinyl or aluminum window | Custom size, upgraded glass |
| Labor | $75-$250 each | Removal and installation | Restricted access, frame adjustment |
| Trim and sealing | $20-$100 each | Exterior trim, caulk, flashing | Rot, unusual siding details |
| Removal and disposal | $15-$75 each | Old window handling | Bulky units or extra haul distance |
| Repairs and permits | $50-$500+ | Minor opening repair or local fees | Water damage, code requirements |
Labor and opening condition can make a budget window much more expensive to install. Many installers charge $50 to $100 per labor hour, though per-window pricing is common. Confirm whether the estimate includes materials, cleanup, tax, and any minimum service charge.
Which sizes, frames, and opening repairs change the price?
Size and fit are major price drivers because mobile home windows may use dimensions that differ from common site-built house windows. A stock unit can be economical when its actual frame dimensions match the opening; ordering a custom window can add $100 to $400 or more.
Vinyl units generally cost less than higher-end aluminum or specialty designs. Double-pane glass, low-emissivity coatings, tempered glass, and unusual shapes can also raise the unit price. As a rough threshold, windows wider than 36 inches or taller than 48 inches may require a larger unit, additional handling, or customized framing.
Damage around the opening is often the biggest source of an unexpected change order. Minor sill or trim repairs may add $50 to $250, while water-damaged framing or siding repairs can add $300 to $1,000 or more. A quote should state whether hidden damage is billed separately.
Where can homeowners reduce mobile home window costs?
Keeping the existing opening size avoids custom fabrication and reduces the risk of siding or interior-wall work. Before ordering, measure the frame carefully and have the installer verify dimensions; window sizing conventions can differ from the opening measurement.
Choose a standard, readily available vinyl unit when it meets the opening and performance needs. Compare at least three written quotes with the same window specifications, installation scope, and disposal terms. For several windows, ask whether one crew visit reduces the per-window labor charge, but check that the project total and warranty are clear.
Replacing only failed or damaged windows may cost less than a full-home project. However, matching old and new frames can affect appearance, and repeated service calls may increase total labor. Avoid paying for upgrades that do not suit the climate or the window’s exposure.
How regional labor rates affect installed window prices
Installed prices can vary substantially by location. Higher-cost metro areas and regions with strong contractor demand may run 15% to 30% above a typical national estimate. Rural markets may have lower hourly rates but charge more for travel or have fewer installers familiar with manufactured-home openings.
Use local quotes rather than a national average to set the final budget. For a standard window that might cost $350 to $600 in a moderate-cost market, an urban quote could reach roughly $400 to $780. A remote job may also carry a $50 to $200 trip or minimum-service charge, especially for a single window.
Ask whether the installer has experience with the home’s siding and window attachment style. Estimates should identify travel fees, local permit charges if applicable, and any required inspections rather than treating them as included by default.
How long does a mobile home window installation take?
A straightforward replacement usually takes about one to three hours per window for removal, fitting, sealing, and trim. A two-person crew may finish several standard windows in a day, but repairs, custom fitting, or difficult access can extend the schedule.
Labor time rises when the opening must be rebuilt or the old window is difficult to remove. Ask whether the estimate covers interior and exterior finishing and cleanup. If those tasks are excluded, another trade or additional labor may add $100 to $500 or more to the project.
Replacing multiple windows during one visit can reduce repeated setup and travel charges. A single-window job may be subject to a minimum fee of $150 to $300 even when the actual installation takes only a few hours.
Is repair cheaper than replacing the entire window?
Some problems do not require a new unit. Replacing a screen may cost $30 to $100, while new weatherstripping or a small hardware repair can run $50 to $200. These repairs are most useful when the frame is solid and the window opens, closes, and locks properly.
Repair is usually less expensive when the defect is limited to a screen, latch, or seal. A cracked pane or failed insulated-glass seal may cost $100 to $350 to repair, depending on glass type and availability. If the frame is warped, leaking, or rotted, replacement may be more reliable than paying for repeated repairs.
Ask for both a repair price and a replacement price when the window has more than one problem. Compare the work covered and warranty terms, not just the initial total.
What removal, delivery, and permit charges should be checked?
Basic installation estimates may exclude old-window disposal, delivery, or repairs discovered after removal. Disposal commonly adds $15 to $75 per window, while delivery may cost $25 to $150 depending on supplier distance and order size. Custom units can have longer lead times and may require a deposit.
Confirm exclusions in writing before approving the work. Permits are not required for every like-for-like replacement, but local rules may apply when the opening changes, structural framing is altered, or safety glazing is required. Permit and inspection fees vary by jurisdiction; ask the contractor or local building office whether they apply.
Check that the quote identifies the exact window size, frame material, glass features, installation method, and warranty. This makes competing estimates easier to compare and reduces the chance of add-on charges after work begins.