A Niagara Stealth toilet typically costs about $250-$500 for the fixture, while a professionally installed replacement commonly totals $500-$1,000. Price depends on the model, local labor, whether the old toilet needs removal, and whether the existing plumbing or floor requires repair.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Niagara Stealth toilet | $250 | $350 | $500 | Fixture price varies by model, retailer, and finish |
| Professional installation | $150 | $275 | $450 | Typical straightforward replacement labor |
| Removal and disposal | $25 | $60 | $125 | May be included in a plumber’s quote |
| Installed replacement | $425 | $700 | $1,075 | Includes fixture and common labor; repairs can raise the total |
What a Niagara Stealth toilet costs to buy and install
A Niagara Stealth toilet usually falls in the $250-$500 range before installation. A common two-piece, elongated model with a standard white finish is often near the middle of that range; retailer availability, seat inclusion, and model specifications can shift the price. Special finishes or less commonly stocked configurations may cost more or require ordering.
For a like-for-like replacement, a homeowner can budget roughly $500-$1,000 for the toilet and professional installation. That estimate assumes the current shutoff valve, flange, supply line, and floor are usable. A basic install in a lower-cost market may land below the average, while higher labor rates or a difficult removal can push the total above it.
A practical starting budget is about $700 for a standard Stealth toilet replacement with ordinary access and no plumbing repairs. Retail prices can change, so a current quote should identify the exact model and whether delivery, the seat, and disposal are included.
Assumptions: U.S. pricing, standard white fixture, existing toilet location, ordinary access, and no concealed water damage or code-related plumbing work.
How fixture, labor, and removal appear in the quote
Quotes may package the toilet and labor together, so buyers should ask for a line-item estimate. The table shows typical cost contributions for a standard replacement, not fixed national rates. A plumber may charge a minimum service fee even when the installation itself takes only a few hours.
| Quote item | Typical price | Common unit | What changes the charge |
|---|---|---|---|
| Stealth toilet | $250-$500 | Per fixture | Model, finish, retailer, and included seat |
| Installation labor | $150-$450 | Per toilet or $75-$150 per hour | Local rates, access, and plumbing condition |
| Wax ring and small supplies | $10-$40 | Per installation | Seal type and replacement fittings |
| Supply line or shutoff valve | $15-$125 | Per part, plus labor if needed | Age, corrosion, leaks, and connection size |
| Old toilet removal | $25-$125 | Per fixture | Haul-away distance and disposal policy |
| Delivery | $0-$75 | Per order | Retailer, distance, and delivery service |
Labor pricing may be quoted as a flat installation fee or by time. For an hourly quote, a useful comparison is . Ask whether the fee covers reconnecting the water, testing for leaks, setting the toilet, and hauling away packaging and the old fixture.
Confirm that the quote separates the toilet, installation, removal, and any plumbing parts. This makes it easier to compare a retailer’s installation package with a local plumber’s estimate and reduces the chance of paying twice for included work.
Model, rough-in, and bathroom conditions that change the price
The Stealth line is known for low-flush designs, but buyers should check the exact model and its specifications rather than relying on the product family name. A model’s bowl shape, height, included seat, and finish can affect the fixture price and compatibility. A standard white model is generally the simplest price comparison; a less common finish can narrow retailer choice.
Measure the rough-in, the distance from the finished wall to the center of the floor drain bolts. Many U.S. toilets use a 12-inch rough-in, but 10-inch and 14-inch installations exist. A mismatch can require a compatible toilet, an offset fitting, or other work. Verify the Stealth model’s required rough-in before purchase rather than assuming a standard size.
Bathroom condition is another major variable. A sound flange and level floor keep the work straightforward; a cracked flange, soft subfloor, corroded shutoff, or leaking supply connection adds parts and labor. Small repairs may add $50-$200, while subfloor or flange replacement can add several hundred dollars depending on how much flooring must be opened.
Rough-in size and floor condition can matter more to the installed total than a modest difference in the fixture’s shelf price. A 12-inch rough-in and an intact flange are common assumptions behind basic installation quotes.
Typical thresholds: 10-, 12-, or 14-inch rough-in; a standard replacement may take 1-3 labor hours, while flange or floor repairs can extend the job.
Keep the Niagara Stealth installation price under control
Reducing the price starts with confirming compatibility before the toilet arrives. Measure the rough-in, check the water-supply position, and verify that the selected model fits the bathroom. A wrong-size fixture can lead to return fees, a second delivery, or additional plumbing work.
Request quotes for the same scope from at least two licensed plumbers. Specify whether the estimate includes the toilet, seat, wax ring or seal, new supply line, old-toilet removal, disposal, and leak testing. A low labor quote may exclude removal or parts, while a higher flat rate may include them.
If the toilet is being replaced during other bathroom plumbing work, ask whether the plumber can combine visits. Avoid adding a valve replacement or upgraded seat unless the existing part is worn or the feature is wanted. Conversely, replacing a visibly corroded shutoff during installation may prevent a separate service call later.
Compare complete installed totals, not just the fixture price or advertised labor fee. Keep the existing toilet in place until the correct replacement is on site, and check the retailer’s return policy before opening the box.
How long a plumber needs for a Stealth toilet swap
A straightforward removal and installation usually takes about 1-3 labor hours. The plumber shuts off and drains the old toilet, disconnects it, checks the mounting area, installs a new seal, sets the Stealth toilet, reconnects the supply, and tests the flush and connections. A contractor may charge a minimum visit fee even when the hands-on work is brief.
Hourly rates commonly run about $75-$150, with higher charges possible in expensive metro areas or for emergency appointments. A flat fee of $150-$450 for installation is also common, but its coverage varies. Confirm whether the flat price includes the old toilet’s removal and basic materials.
Extra time is likely if the floor is uneven, the flange sits too low or is damaged, or the shutoff valve will not close. A seized mounting bolt can also complicate removal. These conditions are difficult to price accurately before inspection, so a quote may list repair work as an additional charge rather than including it in the base installation.
Plan for a half-day appointment window even when the actual replacement takes only a few hours. The extra time allows for access, water testing, cleanup, and ordinary delays without treating the job as an all-day renovation.
Removal, supply lines, and other possible add-on charges
Old-toilet removal and disposal may cost $25-$125, depending on whether the installer takes the fixture away and how local disposal works. Some plumbers include haul-away in a flat installation price; others leave the old toilet at the property or charge a separate disposal fee. Clarify this before scheduling.
A new braided supply line generally costs about $10-$30 for the part, with labor adding roughly $25-$75 when replacement is not already included. A shutoff valve may cost $15-$50 for the part, but installation can bring the combined charge to $75-$200 or more if access is poor or the pipe needs repair.
Flange, flooring, and water-damage repairs have a wider range because the damage may be hidden under the existing toilet. A minor flange adjustment may add $50-$150. Replacing a damaged flange or a section of subfloor can bring the added work to $150-$600 or more, especially when finished flooring must also be patched.
Ask the installer to get approval before proceeding with any repair beyond the agreed replacement scope. Photos of a damaged flange or subfloor help document why the estimate changed and make it easier to compare the repair charge.
Regional labor rates and delivery can shift the installed total
Fixture prices vary by retailer and stock, but labor geography often has a larger effect on the final bill. In lower-cost rural or small-market areas, a standard replacement may be 10%-20% below a national-style estimate. In dense, high-cost metro areas, labor and service minimums can run 15%-35% higher than the middle of the U.S. range.
These percentages are useful planning allowances, not guaranteed regional price lists. Local licensing requirements, travel distance, parking, building access, and contractor availability all influence the quote. A rural contractor may charge a travel fee, while an urban installer may include parking or building access time in a higher flat rate.
Delivery can add $0-$75, and a retailer may charge more for timed or in-home delivery. Since toilets are heavy and fragile, a damaged shipment can delay installation. Check whether the retailer inspects or replaces a damaged fixture and whether a return pickup is included.
Use the local labor quote as the main regional adjustment, then add delivery only if it is not already included. Getting one quote from a retailer’s installer and one from a local plumber can reveal whether the convenience package is worth its additional charge.
Stealth low-flow pricing compared with standard toilets
A basic conventional toilet can cost roughly $100-$250 for the fixture, often less than a Niagara Stealth model. Midrange toilets from other brands commonly run $200-$500, overlapping the Stealth’s typical shelf price. Premium models with specialized finishes, enhanced flushing features, or integrated bidet functions can exceed $700 before installation.
Installed totals for a standard toilet replacement often range from $350-$850 for a basic fixture and ordinary labor. That may be $100-$250 less than a Stealth installation when comparing a lower-priced conventional model, though local labor and repair needs can erase the difference. Compare similar bowl shapes, heights, and included parts to make the comparison meaningful.
The Stealth’s low-flush design may reduce water use compared with older toilets, but savings depend on local water and sewer rates, household use, and the model’s actual performance. It is difficult to justify a higher purchase price using a single national payback estimate. Check the product’s published flush rating and local utility incentives, if any, before assigning a dollar value to water savings.
Compare both the installed price and the specific flush specifications rather than assuming every low-flow toilet has the same value. If the current toilet works and has no leaks, replacement is a discretionary upgrade; if it leaks or needs frequent repairs, replacement may avoid ongoing repair expenses.
Three realistic Niagara Stealth replacement estimates
The examples below show how scope changes the total. They assume a white Stealth fixture priced within the typical range and ordinary U.S. residential work. Actual local quotes may vary, and a plumber should inspect damage before promising a final price.
| Scenario | Fixture and parts | Labor | Other charges | Estimated total |
|---|---|---|---|---|
| Simple 12-inch replacement | $300-$375 | 2 hours at $85-$110 per hour, or $170-$220 | $20-$40 supplies, $0-$50 disposal | $490-$685 |
| Metro installation with haul-away | $350-$450 | 2-3 hours at $110-$150 per hour, or $220-$450 | $30-$60 supplies, $50-$125 disposal | $650-$1,085 |
| Replacement with valve and flange work | $300-$425 | 3-5 hours at $90-$140 per hour, or $270-$700 | $75-$200 valve and flange parts, $25-$100 disposal | $670-$1,425 |
The first example assumes the existing valve and flange are sound, access is clear, and the installer uses a standard seal. The second reflects higher metro labor and paid haul-away. The third allows for repair work, but does not include extensive subfloor replacement, flooring restoration, or water-damage remediation.
A quote near the upper end is most explainable when it itemizes high local labor, removal, or actual repair work. If a simple replacement estimate is substantially above these ranges, ask which parts of the scope, access conditions, or service minimum account for the difference.