A bathroom vanity typically costs $180-$4,500 for the unit, with many U.S. buyers paying about $900 for a stock or midrange cabinet and countertop. Installed totals commonly run $550-$5,800, depending on width, materials, plumbing changes, countertop, and local labor rates.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Stock vanity unit | $180 | $650 | $1,800 | Typically 24-60 inches wide; basic cabinet and top |
| Midrange vanity unit | $700 | $1,500 | $3,200 | Better storage, finish, or countertop |
| Installed stock vanity | $550 | $1,500 | $3,400 | Removal and plumbing reconnection may be extra |
| Installed custom vanity | $2,000 | $4,000 | $8,000+ | Custom cabinetry, stone top, and site work |
What buyers pay for a bathroom vanity by width
For a basic 24-30-inch vanity, the cabinet-and-top price is often $180-$700. A 36-48-inch stock model is commonly $350-$1,300, while a 60-inch double-sink model generally costs $800-$2,500. These ranges cover common ready-made products, not extensive plumbing relocation or wall repair.
A practical installed budget for a standard stock vanity is $900-$2,200. That assumes a straightforward replacement, ordinary access, a new faucet, and no major changes to water lines or drain location. A small powder-room unit can land below $700 installed; a broad double-sink replacement with upgraded fixtures can exceed $3,500.
Custom cabinetry generally starts near $1,500 for the cabinet alone and can exceed $5,000 before installation. A furniture-style vanity or premium wood finish also raises the price. Homeowners comparing low prices should check whether the listing includes the countertop, sink, backsplash, faucet, and cabinet hardware.
Assumptions: Typical U.S. stock products and standard replacement labor; local taxes and unusual site work are excluded unless stated.
How cabinet, countertop, and labor shape the quote
A vanity estimate combines the cabinet and top with installation, plumbing, delivery, and disposal. Some sellers include a sink and countertop in the advertised price, while others price them separately. The following ranges reflect typical replacement work and can overlap when a contractor sells a package.
| Quote item | Low | Average | High | Common pricing basis |
|---|---|---|---|---|
| Cabinet and vanity top | $180 | $900 | $3,200 | Per unit; stock to midrange |
| Installation labor | $250 | $650 | $1,400 | Per project; basic to complex |
| Faucet and drain fittings | $60 | $250 | $700 | Per fixture set |
| Removal and disposal | $75 | $200 | $500 | Per existing unit |
| Delivery and handling | $0 | $90 | $300 | Per order; distance and weight vary |
Labor for a simple replacement often runs $250-$650, including setting the cabinet and reconnecting existing plumbing. A contractor may charge separately for faucet installation, typically $100-$300, or for installing a countertop and sink. Hourly plumbing rates commonly fall around $75-$150, though a minimum service charge may apply.
Compare what each quote includes before treating the lowest number as the best price. Confirm the cabinet, countertop, sink, faucet, drain, delivery, removal, and tax line by line. A 5-8 hour installation at $75-$125 per hour produces $375-$1,000 in labor before materials and any minimum charges.
Which vanity sizes and plumbing changes raise the price?
Width is a major price driver: moving from a 30-inch single-sink model to a 60-inch double-sink model can add $450-$1,800 for the unit and require more installation time. Custom widths or a deep cabinet may cost more because standard stock dimensions and predrilled openings no longer fit the room or plumbing.
Keeping the sink and faucet in their existing positions is usually less expensive. Moving a drain or water lines can add roughly $300-$1,200 for accessible, short-distance changes; work through a finished wall or floor may cost more. Adding a second sink can require new supply lines, drain work, and a compatible top, often adding $500-$1,800 beyond the cabinet upgrade.
Countertop material changes both product and fabrication costs. A laminate top may add $100-$400, while a quartz or granite top can add $400-$1,500 or more, depending on size, edge, sink cutout, and backsplash. Solid-surface tops often fall between those choices. Natural stone may require more careful delivery and support.
Measurements and plumbing locations should be verified before ordering. A vanity wider than the available wall span, a door that hits a cabinet, or a sink cutout that conflicts with the drain can trigger return fees or costly modifications. Bathroom floor level and wall condition also affect how much shimming, trim, or patching is needed.
Is a stock vanity cheaper than custom or semi-custom?
Stock vanities are generally the least expensive choice, with common 24-60-inch models priced around $180-$1,800. They are manufactured in standard widths and finishes, so they can often be delivered quickly. The lowest-priced units may use thinner cabinet panels, basic hinges, and laminate tops, making inspection of construction and warranty terms worthwhile.
Semi-custom cabinets often cost $900-$3,000 before installation. They offer more finish, storage, or sizing choices without the full price of made-to-order cabinetry. Custom vanities commonly start around $1,500 and reach $5,000 or more for complex layouts, hardwood construction, specialty finishes, or integrated storage.
Stock is usually the lowest total-cost option when its dimensions match the existing plumbing and room. A custom cabinet can make sense when an unusual wall span would otherwise leave unusable gaps or require expensive filler work. For many bathrooms, a stock cabinet with a separately selected countertop provides a middle ground between the cheapest package and a fully custom build.
When comparing materials, look beyond the finish. Plywood boxes and solid-wood components can cost more than particleboard or MDF, but moisture exposure, ventilation, and construction quality matter as well. Ask whether the top is included and whether the sink is undermount, drop-in, or integrated, since those details affect both price and installation.
What installation labor adds to a standard replacement
A straightforward replacement generally takes one installer or a small crew about 4-8 hours, including removal, setting the new cabinet, fitting the top, and reconnecting a faucet and drain. A plumber may handle the water and drain connections separately. A larger double vanity or a heavy stone top can require two workers and a longer visit.
Basic installation labor is often $250-$650. The price can rise to $700-$1,400 when the crew must assemble a cabinet, level an uneven floor, cut trim, install a backsplash, or coordinate separate plumbing and countertop work. Hourly charges vary; many trades bill $75-$150 per hour, while some quote a fixed project amount.
Hidden damage is not normally included in a basic swap price. A leaking shutoff valve, rotted subfloor, moldy drywall, or corroded drain can add $150-$1,500 or more depending on repair scope. A contractor should identify whether the estimate covers patching and painting, or stops after the vanity is installed.
Before approving labor, ask whether the installer will disconnect and reconnect the faucet, supply lines, and drain; haul away the old cabinet; and seal the countertop. Also confirm who is responsible for measuring, delivery coordination, and warranty calls if a countertop arrives damaged.
How U.S. location changes vanity installation prices
Labor and delivery can move the total substantially even when the same stock vanity is available nationwide. In many lower-cost Midwest and Southern markets, a simple installation may fall near $250-$500. In high-cost coastal cities, the same scope can run $450-$900 or more due to higher trade rates, parking, insurance, and minimum service charges.
Urban projects may add 10%-25% compared with suburban work when access is difficult, loading is restricted, or crews must carry materials up stairs. Rural homeowners may see lower labor but higher delivery or travel charges, particularly for a stone top or a contractor coming from a distant service area.
Use local quotes rather than a national average to set the final budget. Request at least two written estimates with the same vanity width, countertop, fixture list, removal, and plumbing scope. A quote that is 20% above another may reflect a different labor allowance or included repair, not simply a higher markup.
Taxes and permits depend on local rules and project scope. A simple fixture-for-fixture replacement often does not require a building permit, but plumbing relocation or broader remodeling may. If a permit is needed, fees can range from about $50-$300 for limited work, with inspections or plan costs adding more in some jurisdictions.
Which extras can turn a low vanity price into a high bill?
Removal and disposal often add $75-$500, depending on the old vanity’s size, weight, and disposal access. Delivery can be free with a retailer promotion or cost $50-$300, with additional fees for stairs, narrow access, or a long carry. A heavy stone top may require a scheduled delivery window and extra handling.
New faucets generally cost $50-$400 for common models, while premium finishes or multi-piece sets can exceed $700. A mirror, lighting, side splash, cabinet pulls, and supply lines may add another $100-$800. These items are not always included in a vanity package, even when product photos show them.
Ask for a written allowance for uncertain repairs rather than assuming they are included. Replacing shutoff valves can add about $75-$250 per pair; a new P-trap or drain assembly may add $50-$200 in parts and labor. Wall patching, tile repair, and floor replacement are separate from normal cabinet installation and can change the total considerably.
Some contractors charge a minimum visit fee of $100-$250, even for a short adjustment. Rush scheduling may add 10%-25% when crews are asked to work outside normal availability. Warranty coverage varies: compare the vanity manufacturer’s product warranty with the installer’s workmanship coverage, and check whether labor to replace a defective part is included.
Three bathroom vanity quotes with different scopes
A 30-inch powder-room replacement might include a $350 stock vanity and top, $350 labor, $100 removal, and $100 faucet and fittings. The estimated total is about $900 before tax, assuming the existing supply and drain locations work and no wall or floor damage is found.
A 48-inch single-sink upgrade with a quartz top may include a $1,250 cabinet-and-top package, $600 installation, $150 disposal, and $250 faucet and drain fittings. The estimated total is about $2,250 before tax. The price assumes standard access, no plumbing relocation, and a countertop with a routine sink cutout.
A 60-inch double vanity can approach $4,700 installed without being custom-built. For example, a $2,500 unit, $1,000 labor, $250 removal and delivery, $650 in faucets and drains, and $300 in plumbing adjustments total $4,700 before tax. If a second drain must be routed through a finished wall, the plumbing allowance may need to increase.
These examples are planning estimates, not fixed national bids. The same specifications can vary with city, brand, product availability, contractor schedule, and site condition. A quote should state the exact width, countertop and sink type, faucet count, plumbing work, removal, and exclusions so totals can be compared fairly.
How to lower the vanity price without sacrificing fit
Keep the existing footprint and plumbing locations when possible. Choosing the same width and sink position can avoid drain relocation and reduce labor. Measure wall-to-wall clearance, door swing, supply-line spacing, and the distance from the drain to the cabinet opening before buying. Confirm the finished countertop height and depth as well.
Choose a complete stock package only after confirming what the price includes. A bundled cabinet, top, and sink can cost less than buying components separately, but a package without a faucet or backsplash may not be the lowest finished cost. Compare equivalent specifications, including drawer count, finish, countertop material, and warranty.
Keep a usable existing mirror, light, and faucet if they fit the new vanity and remain in good condition. Reusing a faucet can save $50-$400 in product expense, although an old fixture may need new supply lines or fail after reconnection. Get the plumber’s view before relying on reuse.
Schedule the job during a normal, non-rush period and ask whether delivery can be combined with other remodeling materials. Removing an old vanity yourself may save $75-$500, but only when safe disconnection and disposal are manageable; water lines should be shut off, and heavy stone tops can pose injury risks.
Finally, request itemized quotes from two or three local contractors and verify product availability before scheduling. A low bid that excludes disposal, plumbing, or floor leveling may exceed a complete quote after add-ons. Set aside roughly 10%-15% of the planned project budget for concealed damage or small scope changes, especially in older bathrooms.