A Price Pfister Marielle kitchen faucet typically costs $150-$400 for the faucet alone, while a professionally installed replacement often totals $300-$700. The model, finish, local labor rate, sink configuration, and condition of the existing plumbing account for most price differences.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Faucet only | $150 | $275 | $400 | Varies by model, finish, and seller |
| Replacement installation | $150 | $275 | $450 | Labor for an accessible, standard sink |
| Installed replacement | $300 | $550 | $850 | Higher totals include added parts or plumbing work |
| New supply lines | $15 | $35 | $70 | Pair of standard braided lines |
What a Marielle Faucet Costs for a Typical Sink
For a standard Price Pfister Marielle kitchen faucet, a practical budget is $150-$400 for the fixture and $300-$700 for a straightforward replacement including labor. A midrange project with a faucet around $275 and a plumber charge of $200-$300 commonly lands near $475-$575 before tax or unexpected repairs.
Prices depend on the exact model number and whether the faucet is new, open-box, or sold as remaining inventory. Marielle configurations and finishes can differ, and older or discontinued versions may be harder to find. Assumptions: standard U.S. sink, readily available parts, normal access, and no countertop or valve changes. Confirm the model number and included parts before comparing listings.
How Faucet, Labor, and Supply-Line Charges Add Up
A plumber’s estimate usually separates the fixture from the work and any replacement parts. Basic removal and installation may take one to two hours; corroded connections, a tight cabinet, or a damaged shutoff valve can add time and materials.
| Quote item | Low | Average | High | Typical scope |
|---|---|---|---|---|
| Marielle faucet | $150 | $275 | $400 | Fixture only |
| Removal and installation | $125 | $225 | $350 | Standard replacement labor |
| Supply lines or connectors | $15 | $35 | $70 | Replace as needed |
| Old faucet disposal | $0 | $25 | $60 | May be included in labor |
| Shutoff valve repair | $50 | $125 | $250 | Per valve, when replacement is needed |
Plumber rates often run $75-$150 per hour, though many companies set a $125-$250 minimum service charge. Ask whether the quote includes removal, disposal, new connectors, and the service-call minimum.
Which Marielle Model and Finish Changes the Price
Model type and finish can shift the fixture price by $50-$150 or more. A basic finish and common configuration may fall near $150-$250, while a less common finish, pull-down feature, or hard-to-find version can reach $300-$400 or more from a resale seller.
Compare the model number, number of handle holes, spout style, spray function, and included deck plate. A faucet advertised as Marielle may not include every accessory needed for a particular sink. For used or open-box stock, check return terms and whether the mounting hardware, hose, and spray head are present. A lower listing price may not be a lower project price if parts are missing.
When Sink Holes and Old Shutoff Valves Raise the Quote
Most replacements fit an existing faucet opening, but a sink with three holes may need a deck plate if the new faucet uses one hole. A suitable plate commonly adds $15-$50. New holes in a stainless-steel sink can add roughly $100-$250; drilling stone counters may cost $150-$400 and requires a qualified installer.
Corrosion is another meaningful cost driver. If a shutoff valve will not close or leaks after the work, replacing one valve may add $50-$250, depending on access and local labor. Tight cabinet clearance or seized faucet nuts can add $50-$150 in labor. Photographs of the sink deck and under-sink plumbing help identify these risks before scheduling.
How Local Labor Rates Change Installed Marielle Pricing
Installed prices vary with wages, travel, and service minimums. In lower-cost rural or Midwestern markets, a simple replacement may be $300-$500 with a budget fixture. Large coastal cities and high-cost metro areas can run 15%-35% above that range, particularly when plumbing companies charge higher minimums.
Ask for a written quote that identifies the faucet allowance, labor rate or fixed labor charge, and potential extra-work rates. If buying the faucet separately, confirm that the plumber will install customer-supplied fixtures and whether that work has a shorter labor warranty. Compare the total installed amount, not just the hourly rate.
Three Replacement Quotes for Different Marielle Setups
| Scenario | Fixture and parts | Labor | Estimated total |
|---|---|---|---|
| Easy swap, common finish | $200-$250 | 1 hour at $100-$150 | $300-$425 |
| Pull-down model, new lines | $275-$350 | 1.5 hours at $125-$175 | $465-$690 |
| Stuck faucet, valve replacement | $250-$350 | 2-3 hours at $150-$225 | $650-$1,050 |
These examples exclude sales tax and assume no countertop work. The first reflects an accessible faucet with reusable valves; the last allows for extra removal time and one valve replacement. Use the higher scenario when the existing faucet is corroded or the cabinet opening is cramped.
When Repairing the Existing Pfister Costs Less
If the faucet body and finish remain in good condition, a replacement cartridge, spray head, or hose may cost about $15-$100 for parts. A service call or repair labor can add $100-$250, making a simple repair cheaper than a new faucet and installation. Exact part compatibility depends on the model number.
Replacement is more reasonable when several components fail, the faucet leaks from the body, or compatible parts are unavailable. Before ordering a repair kit, check the faucet’s identification and confirm the seller’s return policy. Compare the parts-and-labor total with the cost of a complete replacement.
Ways to Keep a Marielle Faucet Replacement on Budget
Keep the existing sink and faucet-hole layout when possible, and replace flexible supply lines during the job only if they are worn, leaking, or incompatible. Choose a commonly stocked finish and avoid paying extra for accessories the sink does not need. Have the cabinet cleared and the shutoff valves accessible before the plumber arrives.
Get two or three itemized quotes using the same faucet model and scope. Ask whether a standard installation includes removal and disposal, and clarify charges for seized hardware or valve work before approving extras. Controlling the scope and confirming included labor are the simplest ways to avoid surprise costs.