A Price Pfister Roman tub faucet typically costs $250-$700 for the faucet, with installation bringing a straightforward replacement to about $500-$1,300. The final price depends on the model, the number of handles, local labor rates, and whether the tub deck can be reached without opening a wall or floor.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Faucet only | $250 | $450 | $700 | Price varies by finish, configuration, and availability |
| Installation labor | $250 | $450 | $800 | Higher when access is restricted or plumbing needs work |
| Typical installed replacement | $500 | $900 | $1,500 | Assumes an existing compatible rough-in |
| New installation with access work | $900 | $1,600 | $3,000 | May include access panel or finish repairs |
What a Price Pfister Roman Tub Faucet Usually Costs
For a common three-piece Roman tub setup with a spout and two handles, buyers can budget about $350-$550 for a standard-finish Pfister faucet. Specialty finishes, discontinued styles, and higher-end collections can push the faucet price toward $700 or more. A complete replacement with compatible connections and clear access often totals $650-$1,100.
The most useful comparison is the installed price for the exact model and rough-in, not the faucet price alone. Some sets include the valve or rough-in parts, while others require separate components. Confirm what the box contains before comparing online or retailer quotes.
Assumptions: U.S. prices, standard residential tub, midrange finish, and no major plumbing repairs.
How Spout, Handles, and Plumbing Shape the Quote
A plumber’s estimate may include the faucet set, removal of the old trim, installation, leak testing, and cleanup. The breakdown below gives planning ranges for an accessible replacement; line items can vary by contractor and location.
| Quote item | Typical range | Pricing basis | What changes it |
|---|---|---|---|
| Pfister faucet set | $250-$700 | Per set | Collection, finish, and included rough-in |
| Removal and installation | $250-$600 | Per job | Access, corrosion, and connection condition |
| Supply lines or fittings | $20-$100 | Per job | Required adapters or worn connections |
| Access panel or finish repair | $100-$700 | Per job | Opening and restoring tile, drywall, or cabinetry |
| Disposal and trip charge | $25-$150 | Per job | Local service minimums and haul-away |
Ask whether the quote includes the rough-in valve and access restoration. A low faucet-only quote may not cover either, and restoring finished tile can cost more than the plumbing work itself.
Which Deck Thickness and Valve Specs Change the Price?
Roman tub faucets are mounted through the tub deck or a nearby ledge, so the faucet’s reach and mounting requirements must match the installation. A deck thicker than the model’s stated mounting limit, often around 1-2 inches depending on the product, may require a different installation approach. Check the product specifications before ordering.
Flow rate and spout reach also matter. A tub holding 60-80 gallons may take noticeably longer to fill with a lower-flow faucet than with a higher-flow model. A spout that does not extend far enough over the basin can splash, while a wide handle layout may not fit a narrow deck. Measure the center-to-center spacing and available deck area; changing drilled-hole locations can add $150-$500 or more if the surface needs repair.
Compatibility is a major cost control: verify hole spacing, deck thickness, rough-in, and spout reach before purchase. Reusing an incompatible valve or forcing a poor fit can lead to leaks, extra labor, or a second faucet purchase.
When Does Roman Tub Faucet Installation Need More Labor?
A direct replacement may take about 2-4 labor hours when the plumbing is accessible through a panel and the new set fits existing connections. At roughly $75-$150 per hour, labor commonly falls around $250-$600 after minimum charges and testing. Restricted access, seized fittings, or a need to modify plumbing can extend the visit to 5-8 hours.
For example, 3 hours at $110 per hour equals $330 in labor before parts or a service minimum. If there is no access panel, a plumber may need to coordinate with a tile or finish contractor. The estimate should distinguish faucet installation from carpentry, tile, and drywall repairs.
Request a separate labor allowance for opening and closing the tub surround. That makes it easier to compare plumbing quotes that otherwise include different amounts of restoration work.
What Removal, Adapters, and Hidden Leaks Add
Old Roman tub faucets can be difficult to remove when nuts are corroded or fittings are inaccessible. Allow $50-$200 for extra removal time or replacement fittings in a typical repair; severe corrosion can cost more. A slow leak discovered under the deck may require new supply connections or valve work, often adding $150-$600 depending on access and the affected parts.
Disposal is usually modest, but a contractor may apply a trip fee or minimum charge of $75-$175 even for a short visit. If a new opening is needed in a finished surface, confirm whether the plumber or another trade is responsible for patching and matching it.
Have the installer inspect for moisture and corrosion before the faucet is removed. Early detection can prevent paying for a second service visit or repairing damage after the new trim is installed.
How U.S. Labor Rates Shift the Installed Price
Costs tend to run higher in major coastal metros and dense urban markets than in lower-cost rural areas. A reasonable planning adjustment is 15%-30% above a national-style estimate in expensive metro markets, while some rural markets may come in 10%-20% below it. These are broad comparisons, not guaranteed local rates; travel distance and contractor availability can offset lower hourly labor.
Get at least two written quotes using the same faucet model and scope. Each should say whether the price includes removal, fittings, leak testing, a service minimum, and restoration work. A quote that is $200 lower may simply omit access or finish repairs.
Compare complete scopes and local labor charges rather than relying on a national average. Ask whether the rate is hourly or fixed-price and how additional work will be approved.
Ways to Lower the Price Without Sacrificing Fit
Keeping the existing hole layout and rough-in usually avoids costly changes. Select an in-stock standard finish when appearance allows, and confirm that replacement parts are available for the chosen collection. If a handle or cartridge is the only problem, ask whether the specific part can be replaced instead of buying a full faucet set.
Make the tub area accessible before the appointment and provide photos of the faucet, underside access, and plumbing if available. This helps the contractor spot unusual conditions before arriving. Scheduling routine work rather than an urgent leak visit may also avoid rush charges, which can add $100-$300 in some markets.
Preserve the existing deck openings whenever the current layout is sound. Re-drilling, surface repair, and premium finish upgrades often increase the bill without improving the faucet’s basic function.
Repairing a Pfister Faucet Versus Replacing the Set
A cartridge, handle, or seal repair may cost $100-$350 including diagnosis and labor, depending on part availability and access. That can be economical when the spout and handles are in good condition and the leak is localized. A new faucet set is more likely to make sense when several components leak, the finish is badly worn, or the model’s parts are hard to find.
Before approving a repair, check the model number and ask for the part price, labor charge, and warranty on the work. A discontinued faucet may have limited compatible components; substituting a different trim set is not always possible if its rough-in differs. For a full replacement, compare the cost of the faucet, installation, and any access work as one total.
Repair is usually the lower-cost choice for one identifiable, available part; replacement is easier to justify when compatibility or multiple failures are involved.