A STIHL HT 133 pole saw typically costs about $600-$750 new from remaining dealer inventory, with a common price near $675; used units often sell for $250-$450. Final cost depends on condition, local dealer pricing, included bar and chain, assembly, and whether the model is available new or only secondhand.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| New HT 133 | $600 | $675 | $750 | Remaining inventory; dealer pricing varies |
| Used HT 133 | $250 | $350 | $450 | Working condition, typical wear |
| Replacement chain | $20 | $30 | $45 | Price depends on chain specification |
| Dealer service | $50 | $100 | $180 | Basic inspection through tune-up |
What a complete HT 133 typically costs
For a new STIHL HT 133, budget roughly $600-$750 before any applicable sales tax. The midpoint is about $675 for a complete saw with its standard cutting equipment, assuming ordinary dealer inventory and no unusual delivery charge. STIHL products are generally sold through authorized dealers, so local quotes can differ from online asking prices.
A realistic new-saw budget is about $650-$800 after tax and small dealer charges. The HT 133 is an older model, so a “new” listing may be leftover stock rather than a current production unit. Confirm the serial number, warranty eligibility, included accessories, and whether dealer setup is included before paying.
Used prices commonly fall between $250 and $450. A clean, recently serviced machine with a sound telescoping shaft and sharp cutting equipment may command the upper end; a saw needing carburetor work, a chain, or shaft repairs should cost less. Assumptions: U.S. dollars, standard configuration, ordinary access to a local dealer, and no major mechanical repair.
How the saw, labor, and service shape the quote
The purchase price is only one part of ownership. A dealer may include setup, but a used purchase can require a chain, bar service, fuel-system cleaning, or other work. The table gives typical U.S. ranges; actual service charges depend on shop minimums and parts availability.
| Quote item | Materials | Labor | Equipment | Delivery or disposal |
|---|---|---|---|---|
| New saw purchase | $600-$750 | $0-$40 setup | Included | $0-$40 pickup or delivery |
| Used-saw tune-up | $10-$70 parts | $50-$140 | Shop diagnostic often included | $0-$25 transport |
| Chain replacement | $20-$45 chain | $10-$30 installation | Sharpening tools as needed | Usually none |
Repair labor commonly runs about $75-$125 per hour, though many small-engine shops charge a minimum diagnostic or service fee. Ask whether the estimate includes diagnosis, parts, and testing; a low hourly rate can still produce a higher total if troubleshooting is billed separately.
Engine size, shaft reach, and condition change used prices
The HT 133 is a gas-powered telescoping pole pruner with a 36.3 cc engine and a compact cutting head. Buyers should compare actual model specifications and included bar length with the listing, since photos and seller descriptions do not always show the complete configuration. An intact extension mechanism and functional oiling system matter more than cosmetic wear.
Mechanical condition can create a $100-$250 difference in the value of a used example. A saw that starts cold, idles steadily, accelerates cleanly, and extends and locks securely merits more than one with uncertain operation. A worn chain is a relatively small expense, while a damaged shaft, failed oil pump, or engine repair can erase the savings over a new unit.
Regional quotes also vary. Dealer prices in high-cost metro areas may run about 5%-15% above lower-cost rural markets, especially when stock is scarce. Because this model is older, availability may matter more than geography; compare the out-the-door quote, not just the advertised price.
Cut the HT 133 budget by checking condition first
For a used saw, test it before purchase when possible. Check cold starting, throttle response, chain movement, bar-oil delivery, shaft locks, and visible fuel leaks. A seller who cannot demonstrate operation should price the machine as a repair project, not as a ready-to-work saw.
Get a written repair estimate before buying a unit with hard-starting symptoms. Compare the total purchase price plus parts and labor against a verified running saw. Avoid paying extra for accessories that are already included in a standard configuration, and confirm the correct chain size before ordering replacements.
The best savings usually come from avoiding hidden repair costs, not choosing the lowest listing. If a dealer has new leftover inventory, ask about warranty coverage and setup charges. If comparing used listings, include transport and a baseline service in the budget so the final cost is comparable.
How long does dealer setup or repair take?
Basic dealer assembly or inspection may take about 30-60 minutes of shop labor, while a routine tune-up can require 1-2 labor hours. These figures describe billed work rather than the time a customer waits for pickup. A busy repair shop may need several days or longer, particularly during spring and summer when outdoor power equipment demand rises.
For a used saw, a pre-purchase inspection may cost about $30-$75 if the shop accepts the job and does not waive the fee toward repairs. Ask whether the inspection includes a compression check, chain-oiling test, and operation of the telescoping lock. Those checks help identify expensive problems before a sale.
New HT 133 or used pole saw for the lower total?
A new, dealer-backed unit costs more upfront but offers a clearer condition baseline and may include applicable warranty coverage. A used HT 133 can save roughly $200-$400 at purchase, but that difference narrows if it needs a carburetor service, replacement chain, or other parts. Warranty terms on old or privately sold inventory should be confirmed directly with the seller or dealer.
Compare the HT 133 with current STIHL pole-pruner models by engine type, reach, weight, and dealer support rather than assuming a newer model is directly equivalent. Battery models may require a separate battery and charger, which can add roughly $150-$400 depending on the system. A homeowner who already owns compatible batteries may face a lower entry cost, while frequent cutting can favor a gas model’s refueling convenience.
What should an HT 133 price quote include?
A useful quote should identify whether the saw is new, used, or refurbished; list the bar and chain; state setup and tax separately; and explain warranty coverage. For a used machine, request the service history and ask whether the seller has tested it under load. A low sticker price without those details is not an apples-to-apples comparison.
For a new unit priced near $675, a quote around $700 before tax may be reasonable if setup is included and the saw is in verified new condition. A used asking price above $450 warrants careful comparison with available new inventory and a documented inspection. Compare the complete out-the-door price and condition before deciding which HT 133 is the better value.