THG Paris prices in the U.S. vary by collection, finish, configuration, and dealer, and many products require a project-specific quote rather than a public list price. A single faucet commonly budgets at $1,000-$3,500, while a bathroom package with several fixtures and professional installation can reach $10,000-$40,000 or more.
The ranges below are planning estimates in U.S. dollars, not a guaranteed manufacturer price list; freight, taxes, plumbing changes, and custom options can move a quote substantially.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Lavatory faucet | $900 | $2,000 | $4,500 | Per faucet; configuration and finish affect price |
| Shower trim and controls | $1,500 | $3,500 | $8,000 | Trim only; valves or multiple outlets may add cost |
| Bathtub filler | $2,000 | $4,500 | $9,000 | Freestanding models can require floor plumbing |
| Bathroom fixture package | $7,000 | $18,000 | $45,000 | Several fixtures, before major remodeling work |
What THG Paris bathroom fixtures typically cost
For budgeting, expect roughly $900-$4,500 for a lavatory faucet and $7,000-$45,000 for a multi-fixture bathroom package. The lower end generally assumes a standard configuration, a commonly stocked finish, and no unusual plumbing work. The upper end can reflect decorative handles, specialty finishes, multiple shower components, freestanding fillers, or custom-order pieces.
THG Paris is a luxury fixture brand, so its pricing sits well above commodity faucets and many midrange designer lines. A basic-looking single faucet can still carry a premium for its collection, finish, handle design, and manufacturing details. A full bath estimate may include two lavatory faucets, shower controls and outlets, a tub filler, and accessories; it should not be compared with a quote for a faucet alone.
As a rough per-unit planning range, allow $900-$4,500 for each lavatory faucet, $1,500-$8,000 for shower trim and controls, and $2,000-$9,000 for a bathtub filler. These are estimated U.S. retail ranges, not a uniform THG Paris catalog price. Verify the exact model number, included components, and finish with an authorized dealer before approving a budget.
Assumptions: U.S. retail planning estimates, standard residential quantities, and no major wall, floor, or water-line reconstruction.
How faucet finishes and plumbing work shape the quote
A fixture quote can combine product, installation, and project charges, so buyers should compare the same scope rather than just the fixture subtotal. The table gives typical planning allowances for a single-bathroom project. Product pricing varies by collection and order; labor allowances reflect ordinary U.S. residential work and can rise with difficult access or altered plumbing.
| Quote item | Typical allowance | Pricing basis | What it covers |
|---|---|---|---|
| Lavatory faucet | $900-$4,500 | Per faucet | Fixture, with exact included trim confirmed by dealer |
| Shower trim and controls | $1,500-$8,000 | Per shower setup | Visible trim and control components; valve inclusion varies |
| Plumber labor | $150-$350 | Per hour | Removal, connection, testing, and finish installation |
| Rough-in valve or plumbing changes | $250-$1,500 | Per valve or location | Valve replacement or accessible pipe adjustments |
| Delivery and handling | $100-$600 | Per order | Residential freight, handling, or scheduled delivery |
| Old-fixture removal and disposal | $75-$300 | Per fixture or visit | Removal and ordinary disposal, where offered |
Labor pricing is not always itemized by the hour. A plumber may quote a flat installation charge, especially when the scope and site conditions are clear. For comparison, the labor estimate can be checked with ; for example, 4-8 hours at $150-$350 per hour implies $600-$2,800 before separate materials, travel, or minimum charges.
Confirm whether the quote includes rough-in valves, drain parts, supply lines, mounting hardware, and any required adapters. A decorative trim set may not include everything needed behind the wall. If the dealer and installer supply different parts, ask both to identify who is responsible for compatibility and warranty documentation.
Which finish, configuration, and plumbing specs raise prices
Finish selection and the number of outlets or fixtures usually matter more than small differences in faucet size. A standard finish may be more readily available than a specialty or made-to-order option. Special finishes can add about 10%-30% to a comparable fixture allowance, although the actual upcharge depends on the collection, order status, and dealer quote.
Configuration also changes the bill. A single-hole faucet is generally simpler than a widespread arrangement requiring separate handles and a compatible sink or countertop. A shower with one control and one outlet costs less to furnish than a system with a thermostatic control, hand shower, and overhead shower. Adding an outlet can add roughly $500-$2,000 or more in fixture components, before any plumbing labor.
Existing plumbing is a key threshold. If a replacement matches the existing hole spacing and valve location, installation may remain within a routine service visit. Moving a shower control more than a few inches, changing from a deck-mounted to a wall-mounted faucet, or adding a new outlet can require opening and repairing the wall. That work may add $500-$3,000 or more depending on tile, access, and finish repair.
Water pressure and valve compatibility should be checked before ordering. A thermostatic system may require a compatible rough-in valve and adequate supply capacity; a product that does not match existing connections can trigger added parts or labor. For a freestanding tub filler, the floor location and pipe routing matter: a new or relocated floor supply can add $500-$2,500 in plumbing work, excluding extensive subfloor or tile repairs.
Custom sizing, special handle selections, and coordinated accessories can increase both the product subtotal and lead time. Ask the dealer to distinguish a genuine finish surcharge from a standard collection price, and request written confirmation of the selected finish code and component list.
How U.S. region and dealer sourcing change THG Paris prices
Local labor and freight can shift the installed total even when two dealers quote the same fixture model. As a planning comparison, large coastal metro areas can run about 10%-25% above a national baseline for installation, while smaller cities and rural markets may be 5%-15% below it when a qualified installer is available. Those differences are estimates, not fixed regional price rules.
High-cost markets often combine elevated plumbing rates, parking or access charges, and stricter scheduling requirements. In rural locations, the product may cost the same but freight, limited installer availability, and travel time can narrow any labor savings. A remote service visit may include a $75-$250 trip or diagnostic charge, sometimes credited toward the final work.
Dealer sourcing also affects the quoted total. A showroom quote may include product support or coordination, whereas an online or out-of-area quote may leave delivery, return freight, or installation coordination to the buyer. Compare the exact model, finish, included valve, shipping terms, return policy, and tax treatment. A lower advertised number is not necessarily a lower delivered cost.
Sales tax depends on the transaction and local rules, and delivery may be taxed differently by jurisdiction. A useful quote should show product subtotal, freight, taxes, and any installation estimate separately. Buyers can then compare the product price independently from the cost of getting it to the site and installing it.
What plumbers charge for wall-mounted and freestanding fixtures
Routine replacements are cheaper than installations that require wall opening, floor routing, or finished-surface repairs. A straightforward faucet replacement may take 1-3 hours, with labor around $150-$900 depending on the local rate, access, and minimum service charge. Installing a new wall-mounted faucet can take 4-8 hours or longer when backing, supply lines, or wall finishes need work.
A freestanding tub filler commonly takes 4-10 hours to install when the floor supply is already correctly located and accessible. If the plumber must relocate piping or coordinate with a tile contractor, labor and related trades can push installation charges to $1,000-$3,500. Difficult access below the floor or finished ceilings can increase the total further.
Shower work varies by whether the rough-in valve stays in place. Replacing trim on a compatible, functioning valve may take 2-5 hours. Replacing a valve inside a tiled wall, changing the system layout, or adding a second outlet can require 6-16 hours of plumbing and wall work, often with separate tile repair charges.
Scheduling can influence the fee. A standard appointment may have a minimum charge of $150-$350, while emergency or after-hours service can add 25%-100% to the labor rate. These premiums are not specific to THG Paris products, but they can materially affect an urgent fixture replacement.
Assumptions: Licensed plumbing labor at $150-$350 per hour; actual flat-rate bids vary by city, access, and installer.
When repair or a partial replacement saves money
Replacing a worn cartridge or seal can cost far less than replacing an entire premium faucet when the body and finish remain serviceable. A diagnosis and minor repair may total $200-$700, including parts and a service visit. Parts availability depends on the exact collection and age of the fixture, so provide the installer or dealer with the model information and photographs before scheduling.
A complete faucet replacement often costs $1,200-$5,400 installed when the new unit is a $900-$4,500 model and labor is routine. If the existing faucet has a damaged finish, leaking body, unavailable internal parts, or incompatible plumbing, repair may only delay replacement. A leaking valve concealed in a shower wall also needs prompt assessment because water damage can make a small repair much more expensive.
Replacing only the visible shower trim may be economical if the rough-in valve is compatible, in good condition, and approved for the chosen trim. Do not assume that trim from a different collection fits an existing valve. Confirm manufacturer compatibility and the valve model before buying, since opening a finished wall to correct a mismatch can erase the savings.
For a bathroom update, keeping sound plumbing locations and existing serviceable valves can avoid substantial construction costs. Conversely, retaining an unsuitable valve solely to avoid replacement may create performance or warranty problems. Ask for separate repair, trim-only, and full-replacement estimates so the trade-off is clear.
Where buyers can trim a THG Paris project budget
The most controllable savings usually come from limiting scope and avoiding unnecessary plumbing changes, not choosing a poorly matched component. Select the exact fixtures before rough-in work begins, and keep faucet holes, shower controls, and tub filler locations where they are when practical. Avoiding a wall or floor relocation can save hundreds or thousands of dollars in labor and surface restoration.
Compare three written quotes using identical model numbers, finish codes, quantities, and included components. Ask each dealer to list the valve, trim, handles, accessories, shipping, and expected delivery date. Request a separate installation bid so product discounts are not obscured by unrelated labor or remodeling charges.
Choose a standard or readily available finish if it meets the design requirements. A specialty finish may carry a surcharge and longer lead time; delaying the project can add costs when other trades must return. Check that the selected finish is offered for every component in the package before finalizing the order.
Prepare the site by clearing access to the vanity, shower, or tub and by confirming shutoff valves work before the appointment. Provide photos and fixture specifications to the plumber in advance. Better information can reduce repeat visits, but buyers should not disconnect plumbing or alter finished surfaces unless qualified.
Bundle multiple fixtures into one coordinated order when the dealer can confirm compatible components and delivery timing. A single delivery or installation visit may reduce freight and service-call charges, though a bundle is not automatically cheaper. Compare the itemized package total against separate product and labor quotes, and avoid paying for accessories that are not required for the planned installation.