TimberTech Antique Leather decking typically costs about $5-$8 per sq. ft. for boards alone, or roughly $13-$25 per sq. ft. installed. The final price depends on deck size, framing condition, board length, labor rates, and whether the project includes stairs, railings, or removal of an existing deck.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Antique Leather boards | $5 per sq. ft. | $6.50 per sq. ft. | $8 per sq. ft. | Material estimate; retailer pricing varies |
| Installed decking | $13 per sq. ft. | $18 per sq. ft. | $25 per sq. ft. | Deck surface and standard installation |
| 200-sq.-ft. deck | $2,600 | $3,600 | $5,000 | Excludes major framing repairs and premium railing |
| Fasteners and trim | $1 per sq. ft. | $2 per sq. ft. | $4 per sq. ft. | Varies with edge details and fastening method |
What Antique Leather boards cost for a standard deck
Antique Leather is a TimberTech composite decking color in the Reserve collection. Board-only budgeting generally falls near $5-$8 per sq. ft., before fasteners, fascia, delivery, and waste. A simple 200-sq.-ft. surface may therefore need about $1,000-$1,600 in decking boards, with additional material allowances for cuts and layout.
For a complete deck surface installed over sound framing, a practical range is $13-$25 per sq. ft. A 300-sq.-ft. project would commonly land around $3,900-$7,500. Assumptions: U.S. midrange labor, standard rectangular layout, accessible site, and no extensive structural work. Use the installed range for a surface-only project, not a full deck rebuild.
How boards, labor, and trim shape the quote
Deck quotes may combine material and labor into one rate, so itemized estimates make comparison easier. Board layout, concealed fastening, stairs, and perimeter finishing can add substantial labor and material expense.
| Quote component | Typical range | Pricing basis | What changes it |
|---|---|---|---|
| Decking boards | $5-$8 | Per sq. ft. | Board length, retailer, waste |
| Installation labor | $6-$12 | Per sq. ft. | Layout, access, fastening method |
| Fasteners and accessories | $1-$3 | Per sq. ft. | Clips, screws, plugs, and edge details |
| Fascia and finishing | $5-$15 | Per linear ft. | Deck perimeter and finish choice |
| Old deck removal | $2-$6 | Per sq. ft. | Demolition, hauling, disposal fees |
Labor allowances often reflect crew size and installation time rather than a flat hourly charge. For comparison, can help test a quote; rates commonly run $50-$100 per worker-hour, depending on market and trade. Ask whether the labor line includes stairs, fascia, cleanup, and disposal.
Why board length and deck design change material totals
Board lengths, deck shape, and cutting waste affect how many boards a project needs. A straightforward rectangle may require about 5%-10% extra material, while angled borders or multiple corners can push waste toward 10%-15%. Confirm the measured surface area and waste allowance before comparing bids.
Stairs and railing are often priced separately from the deck surface. Stair construction can add roughly $40-$100 per step, while composite railing may cost about $80-$150 per linear ft. Separate these scope items so a low surface quote is not mistaken for a complete project price.
Does a 200-square-foot deck cost less than 400 square feet?
At the same material and labor rates, a 400-sq.-ft. surface may cost about $5,200-$10,000 installed, compared with $2,600-$5,000 for 200 sq. ft. Larger projects typically need more boards and labor, but the per-square-foot rate can fall when a crew can work efficiently without additional mobilization or complex detailing.
Small decks may have a higher unit rate because delivery, setup, and minimum labor charges are spread across fewer square feet. For a useful estimate, compare both the total and the installed price per square foot.
When removal or framing repairs raise the project price
Replacing only the deck surface costs less when the joists and ledger are structurally sound and spaced appropriately for the product instructions. If framing needs repair or replacement, budget approximately $5-$15 per sq. ft. extra, with concealed damage and difficult access potentially increasing the charge.
Removal and disposal of old decking can add $2-$6 per sq. ft. A contractor may also charge separately for delivery, site protection, or hauling fees. Request a written allowance for hidden framing damage rather than assuming demolition is included.
Which regional labor rates affect Antique Leather installation?
Labor and contractor pricing in high-cost metro areas can run 15%-30% above typical national estimates. Rural markets may be 5%-15% lower, although travel, limited contractor availability, or delivery distance can offset the difference. Material prices also vary by dealer, freight, and local inventory.
These regional differences are not guaranteed discounts or surcharges; they are useful quote-comparison allowances. Compare at least three bids for the same board quantity, fastening system, demolition scope, and finish work.
How to lower the price without changing the color
Keep the design rectangular, limit picture-frame borders, and avoid unnecessary stair or railing upgrades. Ask the dealer for pricing on available board lengths and calculate waste with the installer before ordering. Customer pickup may reduce delivery charges where practical, but boards need safe transport and storage.
Compare TimberTech board pricing with equivalent composite options only after checking product line, warranty, fastening requirements, and finish. Avoid choosing a lower bid that omits disposal, fascia, or required accessories. The most reliable savings come from controlling scope and comparing fully itemized quotes.