There is no verified public price sheet for Todd Price or a contractor called Perimeter Roofing, so an exact company quote cannot be confirmed here. For roof-perimeter work such as drip edge, fascia flashing, and related tear-off, U.S. homeowners commonly budget $600-$2,500, with costs driven by roof length, material, access, and whether shingles also need repair.
The ranges below are general planning estimates, not prices attributed to a specific contractor. A written quote should identify the work, linear footage, materials, and any added repairs.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Drip edge replacement | $400 | $1,100 | $2,500 | About 100-250 linear ft; access and tear-off affect labor |
| Installed drip edge | $3 per linear ft | $6 per linear ft | $12 per linear ft | Material and installation, usually before major roof complications |
| Perimeter flashing repair | $250 | $700 | $1,800 | Small repair through several damaged sections |
| Fascia and edge replacement | $800 | $2,000 | $5,000 | Higher when rot extends behind the visible edge |
What roof-perimeter work typically costs by linear foot
For a straightforward drip-edge installation or replacement, a common planning range is $3-$12 per linear foot installed. A 150-foot roof edge may therefore cost about $450-$1,800, while a larger 250-foot perimeter can reach $750-$3,000 when removal, difficult access, or minor deck repairs are included.
Most standard jobs fall near $600-$2,500 total when the work covers roughly 100-250 linear feet. That estimate assumes asphalt shingles, common aluminum or galvanized-steel edging, normal access, and no extensive fascia or roof-deck damage. High labor markets and premium copper edging can push totals higher.
Assumptions: U.S. residential pricing, standard materials, ordinary roof access, and perimeter-only work rather than a full reroof.
How metal edging, removal, and labor appear on a quote
A useful estimate separates materials from labor and explains whether old edging, shingles, or damaged wood will be removed. The table shows typical installed ranges; contractors may combine line items into a minimum service charge for small jobs.
| Quote item | Typical range | Pricing basis | What changes it |
|---|---|---|---|
| Aluminum or steel drip edge | $1-$4 | Per linear ft, material | Metal thickness, finish, profile |
| Installation labor | $2-$7 | Per linear ft | Roof height, pitch, shingle removal |
| Old edge removal and disposal | $1-$3 | Per linear ft | Fasteners, bundled debris, access |
| Fascia or deck repair | $8-$25 | Per linear ft repaired | Extent of rot and replacement material |
| Small-job minimum | $250-$600 | Per visit or project | Travel, setup, and crew scheduling |
Labor is often the largest variable on short perimeter repairs. A crew’s effective labor rate may work out to roughly $50-$100 per worker-hour, though quotes are commonly presented as a project price rather than an hourly bill.
Which roof dimensions and damage levels change the estimate
Linear footage is the first measurement to verify. A simple ranch roof with 120-160 feet of eaves may need less edging than a multi-gable home with 220-300 feet, even when both houses have similar interior square footage. Valleys, dormers, and steep edges add cuts and setup time.
Pitch and hidden wood damage can shift a basic quote into a repair project. A low-slope roof below about 4:12 is generally easier to access than a steep roof above 8:12; steep roofs may require additional fall protection and labor. If rot is found along more than 10-20 feet of fascia, the contractor may need to replace wood before installing new metal.
Material choice matters too. Painted aluminum is usually a budget option; heavier-gauge steel costs more, while copper may cost several times as much as standard edging. The quote should state metal type, thickness or gauge where available, color, and whether the price includes flashing behind the shingles.
Three sample quotes for common perimeter roofing jobs
These examples illustrate how footage and scope affect a total, not a price from a named contractor. Local labor and minimum charges can change the final estimate.
| Job example | Scope and labor | Estimated total |
|---|---|---|
| Small repair | 60 linear ft; replace loose edge; 3-4 labor hours | $350-$750 |
| Typical replacement | 160 linear ft; remove old edge; standard metal; 10-14 labor hours | $900-$2,000 |
| Complex perimeter | 240 linear ft; steep roof; edge replacement and 20 ft fascia repair; 18-26 labor hours | $2,400-$5,000 |
The complex example costs more because it combines access equipment, greater footage, and carpentry. A quote that is far below these ranges may exclude removal or wood repairs, so the written scope is as important as the total.
When fascia replacement or shingle work adds charges
Perimeter metal is often installed with roof work because the shingle edge may need to be lifted or replaced to secure it correctly. If the existing shingles are brittle, damaged, or near the end of their useful life, patching the edge alone may not solve leaks. A limited shingle repair can add about $200-$800; broader replacement is priced by roof area and can add several thousand dollars.
Rotten fascia is a separate repair, not simply a higher-grade drip edge. Replacing a small section may add $200-$700, while extensive fascia, soffit, or roof-deck damage can add $1,000-$4,000 or more. Ask whether the contractor will document concealed damage and obtain approval before expanding the job.
Regional labor rates and roof access shift U.S. pricing
Compared with a typical suburban market, metropolitan areas with high wages and insurance costs may run about 15%-35% higher. Rural areas can be 5%-20% lower for labor, but travel fees or limited contractor availability may offset the difference. Coastal locations may also have higher material and fastening requirements under local wind codes.
Two-story homes, narrow side yards, landscaping, and roofs that require staging can add roughly 10%-30% to labor. Permit requirements vary by city and by whether work is a repair or part of a reroof; a basic edge repair may not need a permit, but the contractor should verify local rules before work begins.
How to compare a Todd Price or Perimeter Roofing quote
Confirm the contractor’s exact business name and service location before comparing the estimate with market ranges. The keyword alone does not establish which company or individual is being referenced, and a local contractor’s rates may differ substantially from national planning figures.
Compare quotes using the same footage, metal type, removal scope, and repair allowance. Request the measured linear feet, unit price, labor and disposal details, warranty terms, and a procedure for hidden rot. Two or three written estimates help reveal whether a low bid omits necessary work or a high bid includes valuable fascia repairs.
Ways to reduce drip-edge costs without leaving gaps
Bundling edge work with a scheduled shingle replacement can avoid a separate mobilization charge. For a standalone job, fixing only confirmed damaged sections may cost less than replacing every edge, provided the remaining metal is secure and compatible with the roof system.
Choose standard aluminum or galvanized steel when premium copper or custom colors are not needed. Clear roof edges and access paths before the crew arrives, and provide photos of leaks or loose metal when requesting estimates. Avoid choosing solely by the lowest total; confirm that the bid includes proper overlap, fastening, flashing placement, and disposal so a small savings does not lead to repeat repairs.