A Whirlpool Conquest refrigerator typically costs about $150-$600 used, while a tested or refurbished unit often runs $400-$900 before delivery. These side-by-side refrigerators are discontinued, so model, age, working condition, local availability, and the cost of moving or repairing a heavy appliance matter more than a standard new-retail price.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Used, working refrigerator | $150 | $350 | $600 | Price varies with age, cosmetic wear, and included features. |
| Tested or refurbished unit | $400 | $650 | $900 | Ask what testing and warranty are included. |
| Delivery and placement | $75 | $150 | $300 | Stairs, distance, and haul-away can add fees. |
| Common repair visit | $150 | $300 | $600 | Parts and labor vary by fault and model. |
| New comparable side-by-side | $900 | $1,500 | $2,500+ | Current alternatives; premium finishes and features cost more. |
What a Whirlpool Conquest costs in today’s used market
For most buyers, $250-$700 is a practical budget for a working Conquest with basic local delivery. A private-party unit priced at $150-$350 may be several years old, untested, or sold as-is. A clean, operating refrigerator with ice and water working commonly falls around $300-$600. A dealer-tested or refurbished example can reach $900, especially when it includes a short parts-and-labor warranty.
There is no dependable current factory price for the Conquest line because these refrigerators are discontinued. Listings may describe different model numbers, capacities, finishes, and ages under the same family name. New-old-stock units are uncommon; if one appears, its asking price may exceed $1,000, but that does not necessarily mean it is a better value than a current refrigerator with a full warranty.
Used prices are generally for the appliance alone, picked up from the seller. Budget separately for transportation, installation, a water-line connection, and disposal of an old refrigerator. Assumptions: U.S. local-market purchase, standard side-by-side unit, ordinary access, and no major repair included.
How compressor, dispenser, and delivery charges shape the bill
The appliance’s asking price is only one part of the out-of-pocket total. A low-priced unit can become expensive if the ice maker is broken, the sealed system needs work, or the delivery crew must navigate stairs. The ranges below are typical planning figures, not Whirlpool service quotes; exact parts availability depends on the model number and production age.
| Cost item | Typical range | What it may cover | Price effect |
|---|---|---|---|
| Used refrigerator | $150-$600 total | Appliance sold locally, often as-is | Condition and features drive asking price. |
| Inspection and diagnosis | $75-$150 | Service call and basic fault testing | May be credited toward approved repair. |
| Labor | $100-$175 per hour | Appliance technician labor | One to three hours is common for smaller repairs. |
| Ice maker or dispenser repair | $150-$450 | Accessible component and installation | Exact module, valve, or control affects the parts bill. |
| Compressor or sealed-system work | $500-$1,200+ | Specialized diagnosis, parts, and refrigerant work | Often difficult to justify on an older unit. |
| Delivery, stairs, and haul-away | $75-$300 | Local transport, placement, or removal | Distance, stairs, and access change the charge. |
Repair invoices commonly combine a service-call fee with time and parts. A simple labor estimate can be represented as . It does not include parts, diagnostic charges, taxes, or a second visit if a component must be ordered. Request an itemized quote before approving work, particularly for a refrigerator with an uncertain service history.
Model number, age, and cooling faults that shift the price
Model-specific condition matters more than the Conquest name on the front. Check the model and serial label, usually inside the refrigerator compartment, and compare the listing with the actual unit. Features differ, and compatible parts may not be identical across models. A seller’s statement that it “runs” does not confirm that both compartments hold safe temperatures or that the dispenser works.
Age and cosmetic condition create a broad value spread. A unit with a clean interior, working shelves, intact door bins, and no visible rust may sell for $100-$250 more than a comparable model with missing parts or damage. That premium is worthwhile only when the cooling system and major functions have been checked. Ask how long the refrigerator has been operating since it was plugged in and whether it has been moved or stored.
Cooling performance is a key threshold. A refrigerator compartment should generally be near 37°F and the freezer near 0°F after the unit has stabilized; a brief demonstration immediately after plugging it in is not a meaningful test. If the freezer is cold but the fresh-food compartment is warm, airflow, fan, damper, or defrost issues may be involved. A repair can land around $150-$500, depending on diagnosis and parts.
Ice and water features add convenience but also additional failure points. An ice maker, water inlet valve, dispenser switch, or control repair may cost roughly $150-$450. A sealed-system or compressor problem can reach $500-$1,200 or more, making replacement more sensible on many old units. Assumptions: standard technician rates and accessible parts; uncommon or discontinued components may cost more or be unavailable.
When a Conquest repair costs less than replacement
Minor repairs can make sense when the cabinet is sound and the refrigerator cools reliably. A $150-$350 repair to resolve a straightforward fan, switch, or water-line issue may be reasonable on a free or inexpensive unit. A $400-$700 repair deserves closer comparison with the cost of a newer appliance, especially if the refrigerator is old, noisy, or has had repeated failures.
Compare the repair estimate with the complete replacement bill, not just a new refrigerator’s shelf price. A comparable new side-by-side may cost $900-$2,500 or more, while delivery, installation, and removal can add $100-$400. A used Conquest might total $350-$900 after purchase, transport, and a modest repair, but it generally will not offer the same warranty or expected remaining service life.
Ask the technician to identify the failed part, labor, diagnostic fee, warranty on the repair, and whether the quote assumes additional problems. If a compressor or sealed-system repair approaches half the cost of a suitable replacement, seek a second opinion or compare replacement options. The age and condition of the cabinet, door seals, controls, and ice system should inform the decision.
How metro delivery and rural pickup change the total
Local supply and transport can shift the total by $100-$300 or more. In large metro areas, more used appliances may be listed, creating more choice and sometimes lower asking prices; however, delivery, parking, stairs, and crowded schedules can raise the final charge. Suburban buyers may find dealer delivery bundled into a refurbished-unit price, while rural buyers may face mileage fees or limited appliance-service availability.
As a planning estimate, expect used asking prices in high-demand metro markets to run about 5%-15% above comparable listings in less competitive areas. Rural pickup prices may be 5%-15% lower, but a long-distance trip or special delivery can erase the savings. These are directional differences, not fixed regional tariffs; the model, condition, and local inventory can outweigh geography.
Get a delivered price in writing before paying a deposit. Confirm whether the quote includes carrying the unit inside, removing packaging, connecting the water line, and hauling away the old refrigerator. A basic local drop-off may cost $75-$150; stairs, a long carry, remote distance, or disposal can push the bill to $200-$300 or more.
What delivery, setup, and removal usually add
Moving a side-by-side refrigerator safely often costs more than a curbside appliance drop. Measure the doorway, hallway, stairwell, and kitchen opening before purchase. A refrigerator that cannot pass through the route may require door removal, a different delivery crew, or a return fee. Confirm the appliance’s width and depth, including handles, and check whether the doors can open fully in the intended space.
Basic local delivery and placement commonly falls around $75-$150 when the route is straightforward. Stairs, extra distance, narrow access, or a second flight can add $25-$100 or more. Old-unit haul-away typically adds $25-$75, although some dealers include it with delivery. Water-line connection may cost $50-$150 if the shutoff valve and supply line are accessible; plumbing changes can raise the charge.
Allow time for the refrigerator to settle after transport and follow the seller’s or technician’s instructions before connecting it. Do not assume a used unit includes a power cord, water tubing, filter, shelves, or door bins. Replacement accessories may add $20-$150 depending on what is missing. Confirm what is included in writing so a low listing price does not conceal avoidable setup expenses.
Three realistic Whirlpool Conquest purchase totals
These examples show how an asking price translates into a delivered, working budget. Actual quotes vary with model, seller, access, repair needs, and local labor rates. The examples assume ordinary residential access and do not include sales tax where applicable.
| Scenario | Unit price | Other charges | Estimated total |
|---|---|---|---|
| As-is private sale, pickup | $200 | $60 rental truck and straps | $260 |
| Working unit, local delivery | $400 | $125 delivery and $40 haul-away | $565 |
| Dealer-tested unit, minor repair | $650 | $125 delivery, $250 repair, $50 water line | $1,075 |
In the first case, the buyer assumes the risk that the refrigerator may need work after pickup. In the second, a working demonstration and a clear return policy make the additional delivery cost easier to evaluate. The third total is near the lower end of new side-by-side pricing, so the repair warranty, model condition, and replacement budget deserve close comparison.
Ask sellers to demonstrate cooling, ice production, water dispensing, lights, and door seals. For a technician visit, budget roughly $75-$150 for diagnosis and $100-$175 per labor hour, then request a written parts estimate. These checks do not guarantee future performance, but they help distinguish a useful bargain from a unit that needs an uneconomical repair.
Which price decisions can lower a used Conquest bill
Buy only the features and services that are needed, but do not skip condition checks to save a small amount. A plain model without a working dispenser may be a better buy for a household that does not use in-door water. Conversely, a discount for a failed ice maker can disappear quickly if parts and labor cost $200-$450.
Compare at least three local listings with the same model or similar capacity, then compare total delivered prices rather than asking prices alone. Request the model number, age if known, a video of the refrigerator running, and a written description of known defects. A $300 unit with reliable delivery and a limited warranty can be a better purchase than a $200 unit sold as-is several miles away.
Reduce moving costs by measuring the route, arranging ground-level access, and asking whether a seller or dealer bundles delivery and haul-away. Avoid paying for a water-line hookup if the household will not use the dispenser. Do not pay a premium for cosmetic upgrades if door seals, temperature performance, and the compressor’s operation are uncertain.
For a refrigerator needing a major sealed-system repair, compare the technician’s written quote with a current replacement and its delivery costs before approving work. For a minor, clearly diagnosed fault, repair may remain economical. Assumptions: local comparisons use similar capacity and condition; a warranty should be evaluated by its length, covered parts, and service-call terms.