A Lamello Invis Mx2 setup typically costs about $900-$1,800 for the powered installation tool and core accessories, while connector refills add roughly $50-$120 per 20-piece pack. The final price depends on whether the purchase includes the tool, batteries, charger, magnetic drive components, and enough connectors for the project.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Invis Mx2 tool kit | $900 | $1,350 | $1,800 | Price varies with included battery, charger, case, and accessories |
| 20 Invis connectors | $50 | $75 | $120 | About $2.50-$6 per connector |
| Tool and 40 connectors | $1,000 | $1,500 | $2,000 | Before tax and shipping |
| Professional installation labor | $150 | $400 | $900 | Small joint task to multi-panel assembly |
Estimates reflect U.S. specialty woodworking-tool pricing; dealer stock, shipping, and included kit components can change the quote.
What a complete Invis Mx2 setup usually costs
Budget about $1,000-$2,000 for a tool kit plus a modest connector supply. A lower-priced package may include the drive unit and basic accessories, while a higher-priced kit may add batteries, a charger, carrying case, or additional setup parts. Connector quantity is a separate expense in many listings, so check the package contents before comparing prices.
For a shop that already owns the required tool, a 20-piece connector refill is commonly estimated at $50-$120, or roughly $2.50-$6 per connector. A 40-piece supply could therefore add about $100-$240. These are planning ranges, not fixed manufacturer prices; specialty distributors may quote a different pack size or bundle.
Assumptions: U.S. retail or woodworking-supply dealer, new equipment, standard connectors, and no sales tax.
How the Mx2 tool and connector pack shape the quote
The main purchase distinction is whether the quote covers equipment or consumables. A connector-only order is far less expensive than a powered tool kit, but it cannot provide the dedicated magnetic installation function by itself. Compare like-for-like listings by verifying that the Mx2 drive unit and the accessories needed for the intended setup are included.
| Quote item | Typical price | What changes the amount | Budget note |
|---|---|---|---|
| Mx2 drive tool kit | $900-$1,800 | Battery, charger, case, included tooling | Confirm whether it is a complete operating kit |
| 20 connectors | $50-$120 | Pack size and connector version | About $2.50-$6 each |
| Replacement battery or charger | $80-$250 | Compatibility and whether one part or a set is needed | Check kit contents first |
| Shipping and tax | $15-$100 | Seller, destination, order value | May be additional to advertised price |
| Shop labor | $75-$150 per hour | Setup, drilling, alignment, and assembly time |
Connector count, panel thickness, and joint layout change costs
Project size affects connector spending more directly than the tool price. At an estimated $2.50-$6 per connector, 8 connectors cost about $20-$48, while 40 cost about $100-$240. A large panel assembly with numerous detachable joints can use several packs, so count planned connection points and allow for a few extras for test cuts or damaged parts.
Panel thickness and joint geometry also matter because the installer must have enough material for the connector and its bore, with the correct alignment and depth. A layout involving 10 or more joints, angled connections, or difficult access can take substantially longer than a few straightforward joints. Verify the product’s installation requirements against the material and joint design before buying connectors in bulk.
Labor is often driven by setup and precision, not just the number of connectors. A cabinetmaker may spend 1-2 hours on a small, accessible assembly, or 4-6 hours on a larger project requiring layout, drilling, dry fitting, and adjustments. At $75-$150 per hour, those examples imply about $75-$300 and $300-$900, respectively, excluding materials and shop minimums.
Shop purchase or one-time project changes the value
For repeated cabinet or furniture work, the tool cost can be spread across many assemblies. If the kit costs $1,350 and the shop completes 100 projects, the equipment allocation averages $13.50 per project before connector refills and maintenance. For one small job, hiring a cabinetmaker or borrowing compatible equipment may cost less than purchasing the full kit.
DIY users should not assume that a lower-cost substitute will match the same concealed, detachable joint. Conventional screws, dowels, or other connectors may reduce parts expense, but they differ in removability, appearance, tooling, and strength in a particular design. Compare the full joint requirement rather than only the per-connector price.
Regional dealer quotes can differ by shipping and stock
Specialty woodworking equipment is often sold through dealers rather than ordinary hardware aisles, so local availability and shipping can influence the delivered price. A stocked metropolitan dealer may offer pickup and avoid freight charges; a rural buyer may face shipping of about $15-$100, depending on order size and service. Dealer discounts or bundled accessories can also offset those charges.
As a planning allowance, a remote or low-stock purchase may come in about 5%-15% above a comparable stocked local quote after shipping or expedited handling. That is not a guaranteed regional markup. Request the delivered total, confirm lead time, and compare the exact tool and connector quantities rather than relying on a headline price.
Used Mx2 tools and replacement parts need careful checks
A used tool may reduce the initial purchase, but savings depend on condition and completeness. A reasonable planning range is $500-$1,200 for a used unit or kit, with substantial variation based on battery health, wear, included charger, and seller. A missing battery or charger can erase part of the discount, while worn or absent accessories may complicate installation.
Ask for a demonstration, confirm the model and included components, and check whether the tool operates consistently before paying. New connectors remain an additional expense, and a used tool should not be priced like a complete new kit unless its condition and accessories justify it.
Lower the Invis Mx2 bill by controlling the scope
The simplest savings come from buying only the equipment and connector quantity the job requires. Count joints from the drawings, then add a small reserve rather than ordering multiple extra packs without a reason. Compare complete-kit prices with bare-tool listings, but include the cost of any missing battery, charger, case, or drive accessories.
For a one-time assembly, compare the tool purchase with a labor quote from a shop already equipped for the work. For regular production, calculate expected use over several jobs and compare that cost with repeated outsourcing. Combine connector purchases with other planned shop supplies when it reduces shipping, and avoid paying rush fees by ordering ahead of the project schedule.
Before accepting a quote, ask whether labor includes layout, drilling, test fitting, and final assembly. A low hourly rate may not mean a lower total if setup or travel charges are billed separately. A written estimate listing tool access, connector count, labor hours, and shipping makes competing offers easier to compare.