A 2×6 fascia board typically costs $8-$30 for an 8- to 16-foot standard softwood board, while rot-resistant or factory-finished products can cost $25-$90 or more. Installed pricing commonly runs $8-$22 per linear foot, depending on board material, removal, roof access, painting, and local labor rates.
For a straightforward replacement, budget about $12-$18 per linear foot for primed wood installed and painted. The figures below use U.S. retail and contractor pricing ranges; local quotes vary by region, height, and roof condition.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Standard 2×6 board | $8 | $18 | $30 | Typical 8-16 ft softwood lengths |
| Rot-resistant or finished board | $25 | $50 | $90 | Premium species, PVC, or longer pieces |
| Installed wood fascia | $8/linear ft | $14/linear ft | $22/linear ft | Removal and finish work affect price |
| Installed premium fascia | $14/linear ft | $24/linear ft | $38/linear ft | PVC or specialty material, typical access |
What a 2×6 Fascia Board Costs by Length
A nominal 2×6 measures about 1.5 inches thick by 5.5 inches wide after surfacing. Retail price depends on species, grade, treatment, finish, and length. Standard framing-grade pine or spruce is generally the least expensive option, but it may need priming and painting before exposure to weather.
For basic softwood, expect roughly $1-$2 per linear foot before finish and installation. An 8-foot board often runs $8-$15, a 12-foot board $12-$22, and a 16-foot board $16-$30. Longer boards reduce the number of joints, but may be harder to transport and may carry a higher total price.
Pressure-treated lumber can cost about $12-$28 for an 8-foot piece or $20-$45 for a 16-foot piece. It resists decay, but can be wet or rough when purchased and may require drying before paint adheres well. Cedar and other naturally durable woods commonly cost $25-$50 for shorter lengths and $45-$85 for 16-foot boards, with clear or select grades at the upper end.
Factory-primed wood generally adds about $3-$10 per board compared with similar unfinished stock. Cellular PVC and other exterior trim products may cost $35-$90 per board, depending on length and brand. Check product dimensions carefully: a 1×6 trim board is not a 2×6, and retailers may list fascia trim separately from framing lumber.
Assumptions: U.S. retail ranges for common board lengths, before tax, delivery, cutting, and installation.
How Removal, Lumber, and Paint Shape the Quote
A contractor’s estimate may include more than the board itself. Labor, disposal, fasteners, flashing adjustments, primer, paint, and setup can collectively exceed the lumber cost, especially when the existing fascia is difficult to reach or has hidden water damage.
Ask whether the quote includes removal, disposal, and a complete exterior finish. The table shows typical per-linear-foot allowances for a straightforward, accessible wood fascia replacement; each contractor may group charges differently.
| Quote component | Low | Average | High | What changes the charge |
|---|---|---|---|---|
| 2×6 softwood board | $1/linear ft | $1.50/linear ft | $3/linear ft | Species, grade, and length |
| Removal and disposal | $1/linear ft | $2.50/linear ft | $5/linear ft | Rot, nails, height, and debris volume |
| Installation labor | $4/linear ft | $7/linear ft | $12/linear ft | Access, corners, and fastening details |
| Primer and paint | $1/linear ft | $2.50/linear ft | $5/linear ft | Coats, paint type, and surface prep |
| Fasteners and small materials | $0.50/linear ft | $1.25/linear ft | $3/linear ft | Corrosion-resistant nails and flashing work |
Some contractors set a minimum service charge of $200-$500 for a small repair, even if only a few feet of board need replacement. A full fascia replacement may receive a lower per-foot rate than a short repair because setup and mobilization are spread across more footage.
Typical labor allowance: about 0.15-0.35 crew-hours per linear foot for accessible removal and installation, before extensive repair or finish work.
Board Width, Roof Height, and Rot Change the Price
Although a 2×6 is a common size, the required profile should match the existing fascia and roof edge. A 2×6 has about 5.5 inches of actual face width; if the old board is a true 2×8 or a built-up assembly, using a narrower board can leave the roof edge or gutter improperly supported.
Measure the exposed face and thickness before ordering, rather than relying on the nominal size alone. A change from 2×6 to 2×8 can add roughly 20%-50% to board material cost, depending on species and grade, and may require adjustments to gutters or roof-edge metal.
Linear footage is the other major pricing driver. A 100-foot single-story run with normal access may cost $800-$2,200 for wood fascia replacement, while 200 feet often costs $1,600-$4,400. These totals assume standard softwood and ordinary removal; painting, extensive rot repair, or a tall roof can push the quote above the range.
Height and pitch affect safe access. A one-story eave near ground level may require only ladders, while a second-story roof, steep slope, or landscaping obstruction can add 10%-30% for setup, extra crew time, or lift rental. At roughly 20 feet or more above grade, some contractors price access equipment separately.
Damage behind the fascia can make a small-looking job much larger. Replacing a short section of rotten subfascia may add $5-$15 per linear foot for materials and labor; damaged rafter tails or roof sheathing require a separate repair estimate. If deterioration extends beyond about 10%-15% of the visible run, a contractor may recommend inspecting the whole eave before setting a firm price.
Assumptions: Typical suburban access and standard roof-edge construction; structural repairs are not included unless listed.
How Long Fascia Installation Takes and What Labor Includes
A two-person crew may replace 40-80 linear feet of accessible fascia in a day, including ordinary removal and installation. A short repair can take 2-4 hours once a crew is on site, but setup, travel, and paint drying may make a small job less efficient than the footage suggests.
Common carpenter or exterior-trim labor rates range from $50-$100 per worker-hour. Higher rates are possible in expensive metro areas or for licensed roofing contractors handling difficult access. Some companies quote by the linear foot instead of showing hours, so comparing the scope included is more useful than comparing labor figures alone.
Work can take longer when boards are installed under drip edge or gutters, when corners require careful cuts, or when the crew must protect siding and landscaping. Removing gutters and reinstalling them may add about $3-$8 per linear foot, depending on the gutter type and whether replacement hangers are needed.
Finishing affects the schedule. Field-priming and painting may add a day or more to the project calendar, even when hands-on labor is limited. Factory-primed material may shorten preparation, but cut ends still need sealing, and a complete paint finish may remain necessary.
Regional Fascia Prices Differ by Labor and Material Supply
Prices in large coastal metros and high-cost markets can run about 15%-35% above the national middle range because of labor, insurance, and disposal charges. In many smaller Midwestern or Southern markets, standard wood replacement may be 5%-15% below typical national pricing, though storm demand and limited contractor availability can reverse that advantage.
For a standard wood replacement, an approximate installed range is $10-$18 per linear foot in many lower-cost markets and $15-$28 in expensive urban areas. Premium PVC or cedar can exceed $30 per foot in either region when access is difficult or the job includes extensive finish work.
Regional climate also affects the material choice rather than just the quote. Humid, rainy, or coastal locations may favor treated wood, cedar, or PVC, while freeze-thaw exposure makes sound sealing and durable paint important. Coastal corrosion can increase the cost of suitable fasteners; corrosion-resistant nails may add roughly $0.25-$1 per linear foot compared with basic fasteners.
Urban delivery and parking restrictions can add $50-$200 to a material order or contractor visit. Rural work may have a travel or mobilization charge of $50-$150 when the job is far from the contractor’s service area. Ask whether these charges are already included in the per-foot price.
Three 2×6 Fascia Replacement Quotes Compared
The following examples show how board price, footage, access, and finish work combine. They assume typical U.S. contractor pricing and are examples rather than fixed market quotes.
For an ordinary one-story replacement, labor and finishing usually account for more of the total than the softwood boards. A premium material can change that balance, particularly on a long run.
| Project example | Materials and scope | Labor and time | Estimated total |
|---|---|---|---|
| Short repair | 24 linear ft of pine at $1.50/ft, removal, primer, paint | 2-person crew, about 4 hours | $350-$650 |
| Single-story eaves | 120 linear ft of primed wood at $2.50/ft, disposal, paint | 2-person crew, 1-2 days | $1,400-$2,500 |
| Premium PVC run | 100 linear ft at $5-$8/ft, difficult second-story access | 2-person crew, 1-2 days; lift allowance | $2,500-$4,200 |
The short-repair example has a higher cost per foot because the contractor still needs to mobilize and prepare the work area. The 120-foot project spreads setup across more material, while the PVC example costs more because of premium boards and access equipment.
For a quote comparison, check the stated footage, board species and grade, removal method, disposal, fastener type, paint coats, gutter handling, and repair allowance. A bid that excludes painting or hidden rot can look lower even if the eventual invoice is higher.
Wood, Cedar, and PVC Fascia Have Different Upfront Prices
Standard pine or spruce is usually the lowest-cost choice, but it needs a sound paint system and periodic inspection. Its lower board price makes sense where the fascia is accessible, kept dry, and easy to maintain. Untreated framing lumber should not be left exposed to rain and sun without proper sealing.
Compare the installed and maintained cost, not only the shelf price per board. Cedar generally costs more upfront but resists decay naturally; it may still need staining or sealing to preserve appearance. PVC costs more initially and avoids routine painting, but it expands and contracts with temperature and requires installation practices suited to the product.
For roughly 100 linear feet, the material-only cost might be $100-$300 for standard softwood, $300-$700 for cedar, or $400-$900 for PVC, depending on board lengths and local stock. Installed totals can be substantially higher: about $800-$2,200 for basic wood, $1,500-$3,200 for cedar, and $1,600-$3,800 for PVC under typical access conditions.
Aluminum fascia cover is another option, often priced around $5-$12 per linear foot for material and $9-$20 installed. It can protect existing sound wood, but it does not fix rotten backing. A contractor should confirm that the underlying fascia is solid before covering it.
Control 2×6 Fascia Costs Through Scope and Board Choices
Measure each eave run and note corners, roof height, gutters, and visible damage before requesting estimates. Accurate footage helps prevent oversized material allowances, while photographs can help contractors identify access issues before a site visit. A final measurement should still be confirmed on site.
Keep the replacement profile and scope consistent across bids so the lowest quote is genuinely comparable. Request separate prices for standard wood, primed wood, and PVC where each is suitable, and ask for removal, disposal, painting, and gutter work to be itemized.
Use the longest practical board lengths to reduce joints, but avoid paying for excessive length that cannot be transported or handled safely. Standard softwood can be an economical choice if the boards are properly primed and painted; premium material is most valuable where moisture exposure or maintenance access is a real concern.
Replacing fascia while gutters or other eave work is already scheduled can reduce repeat setup charges. Combining related work may save $100-$300 in mobilization on small projects, but bundling only helps if the added work is necessary and the combined quote remains itemized.
Do not authorize full-roof or structural upgrades based only on a fascia quote. Ask the contractor to photograph concealed damage and price any subfascia, rafter-tail, or sheathing repair separately. For a sound board with isolated paint failure, scraping, sealing, and repainting may cost about $2-$6 per linear foot, much less than replacement; that option is unsuitable when the wood is soft, split, or decayed.