Three-quarter-inch Sheetrock typically costs about $35-$60 per 4-by-8-foot sheet, with installed prices often reaching $3-$6 per square foot when specialty material and added handling are included. The final quote depends on panel size, product type, delivery, ceiling or wall access, and local labor rates.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| 3/4-inch panel, 4-by-8 ft | $35 | $48 | $60 | $1.09-$1.88 per sq ft |
| Material for 200 sq ft | $220 | $300 | $375 | Includes about 10% waste |
| Installed drywall, per sq ft | $3.00 | $4.25 | $6.00 | Hang, tape, and basic finish |
| Installed 200-sq-ft project | $600 | $850 | $1,200 | Before unusual repairs or upgrades |
What 3/4-Inch Sheetrock Costs for a Typical Wall
For a small project, a 3/4-inch drywall sheet generally costs $35-$60 for a standard 4-by-8-foot panel. That covers 32 square feet, or roughly $1.09-$1.88 per square foot for the board alone. A 4-by-12-foot panel, when available, can cost about $55-$90 and covers 48 square feet.
For budgeting, allow about $4.25 per square foot installed for a straightforward residential job. A 200-square-foot wall area may total $600-$1,200 for material, hanging, taping, and a basic finish. The average estimate of about $850 assumes ordinary access, a modest amount of waste, standard joint compound and fasteners, and no major framing correction.
Three-quarter-inch board is substantially thicker and heavier than common 1/2-inch drywall. It is not stocked as widely, so local availability and special-order delivery can affect both the panel price and schedule. Prices also vary by brand and whether the product has a specialty rating or core.
Assumptions: U.S. residential interior, standard 4-by-8-foot panels, normal access, midrange labor, and a basic taped finish. Paint, insulation, framing, and tax may be additional.
How Board, Hanging, and Finishing Shape the Quote
A contractor’s estimate may group expenses into one installed rate or list them separately. The ranges below are budgeting estimates for a 200-square-foot area; the labor and material mix changes with panel availability, ceiling height, finish level, and project size.
| Quote item | Typical rate | 200-sq-ft estimate | What it covers |
|---|---|---|---|
| 3/4-inch board | $1.10-$1.90 per sq ft | $220-$380 | Panels plus ordinary cutting waste |
| Fasteners and joint materials | $0.20-$0.50 per sq ft | $40-$100 | Screws, tape, compound, corner bead as needed |
| Hanging labor | $0.75-$1.75 per sq ft | $150-$350 | Moving, cutting, lifting, and fastening panels |
| Taping and finishing labor | $0.90-$1.80 per sq ft | $180-$360 | Joint treatment and sanding to stated finish level |
| Delivery and disposal | $50-$200 per job | $50-$200 | Depends on distance, minimum charges, and debris |
Labor and finishing can cost as much as—or more than—the panels. The table is a component estimate, not a fixed bid; contractors may combine hanging and finishing rates, and a small repair can have a minimum charge that makes its per-square-foot rate higher.
Some estimates exclude primer and paint, insulation, removal of existing drywall, and protection of occupied rooms. Ask whether the quoted finish is ready for primer, whether corner bead is included, and whether the price covers cleanup. A smooth finish under strong side lighting can require more labor than a basic finish.
Panel Size, Ceiling Height, and Board Type Change the Price
Panel dimensions influence material use and installation effort. A 4-by-8-foot sheet covers 32 square feet, while a 4-by-12-foot sheet covers 48 square feet. Longer boards can reduce the number of seams on a large wall, but they are harder to carry through tight hallways and may require extra workers or specialized lifts.
Three-quarter-inch thickness adds weight, so access and lifting can matter as much as the panel price. Compared with a common 1/2-inch sheet, a 3/4-inch panel can weigh roughly 20%-35% more, depending on the product. Confirm that existing framing, fasteners, and door or trim clearances suit the specified board before ordering.
Ceilings, stairwells, and walls over 10 feet high usually cost more than open, ground-level walls because of lifting, staging, and slower placement. Difficult access can add about 10%-25% to labor, while multiple corners, openings, or small separated areas may add more through cutting and setup time.
Product type matters, too. Specialty sound-control, fire-rated, or moisture-resistant boards can cost more than a basic panel, and some products may not be offered in 3/4-inch thickness locally. Verify the exact product name and application rather than assuming that a thicker sheet automatically meets a particular code or sound rating.
Control the 3/4-Inch Drywall Choices That Raise Labor
Specify the panel thickness only where the project needs it. If a plan calls for 3/4-inch board throughout, ask the contractor to confirm whether that is a design, structural, acoustic, or clearance requirement. Switching to commonly stocked 1/2-inch or 5/8-inch drywall may lower material cost, but it should not be done if it conflicts with the plans, code, or assembly requirements.
Keeping the scope simple is usually the safest way to lower the installed price. Group wall areas into one visit, clear furniture and stored items before the crew arrives, and confirm that the work area is accessible. These steps reduce setup and handling time without compromising the specified board or finish.
Compare quotes on the same basis: thickness, panel size, finish level, removal, delivery, cleanup, and paint should match. A low bid that excludes taping or disposal may not be cheaper overall. For a small job, ask whether the contractor has a minimum charge and whether another nearby repair can be scheduled at the same time.
Order only after confirming measurements and local stock. A careful layout can reduce offcuts, but buying too few panels can trigger another delivery fee or delay. Avoid paying for an upgraded finish or specialty board unless the room’s use, plans, or applicable requirements call for it.
Three Sample Quotes for Different 3/4-Inch Jobs
The examples below show how scope changes the total. They assume ordinary U.S. labor conditions and are estimates rather than national fixed prices. Square footage refers to board coverage, not floor area.
| Job scenario | Material and labor | Estimated total | Price per sq ft |
|---|---|---|---|
| One 32-sq-ft wall patch | 1 panel, 3-4 labor hours, materials | $250-$450 | $7.80-$14.05 |
| 200-sq-ft open wall | 7 panels including waste, 16-22 labor hours | $600-$1,200 | $3.00-$6.00 |
| 500-sq-ft ceiling and walls | 18 panels including waste, 38-55 labor hours | $1,800-$3,400 | $3.60-$6.80 |
Small jobs have the highest apparent per-square-foot rate because travel and setup are spread over less area. The 32-square-foot example includes a likely minimum labor charge and finish work. The larger ceiling example allows for slower overhead handling and more protection, but not removal of old board or repainting.
To check an estimate, compare its board count with measured coverage. A 200-square-foot area needs about seven 4-by-8 sheets after allowing for roughly 10% waste; layouts with many openings or irregular angles can need a different allowance. Ask for labor hours or task descriptions when a total appears substantially above comparable bids.
How Crew Size and Finish Level Affect Installation Time
For open, easy-to-reach walls, a two-person crew may hang around 200-400 square feet of board in a workday, though thick panels, cutting, and layout can slow production. Taping and compound require multiple passes and drying time. A project can occupy several calendar days even when active labor totals only 16-22 hours.
Request separate pricing for hanging and finishing if the schedule or finish standard is uncertain. A typical residential installer may charge about $50-$90 per labor hour when billed by time, while a drywall finisher may be priced differently by market and scope. Small jobs are often quoted as a flat minimum rather than by the hour.
Example: 18 labor hours at $65 per hour equals $1,170 in labor before materials, delivery, and any separate finish charges.
Confirm whether the estimate includes a basic finish or a smoother finish intended for critical lighting. Also establish who moves furniture, protects floors, and returns to sand after compound dries. Rush scheduling may add a fee when it requires overtime or a dedicated trip.
Why 3/4-Inch Panel Prices Vary Across U.S. Regions
Local labor markets and distribution affect the quote more than a single national board price. As a broad planning adjustment, large coastal metros can run about 10%-25% above a midrange national estimate, while some smaller markets may be 5%-15% below it. These are directional comparisons, not guaranteed regional rates.
Special-order freight can erase a lower shelf price when 3/4-inch stock is not available nearby. Ask suppliers or contractors whether the material is in local inventory, how much delivery costs, and whether a minimum order applies. Rural delivery distance, stairs, and restricted loading access can also add charges.
Labor costs tend to rise in dense cities where parking, building access, or high-rise rules slow delivery and installation. In lower-cost areas, a longer drive or limited contractor availability may offset cheaper hourly rates. Get quotes from providers serving the same location and compare the included scope rather than relying on regional averages alone.
When Thinner Drywall Is a Lower-Cost Substitute
Standard 1/2-inch drywall is generally less expensive and more widely stocked; a 4-by-8 sheet often costs about $12-$20. Five-eighths-inch board commonly costs around $15-$28 per 4-by-8 sheet, depending on type and market. Installed pricing for ordinary wall work may fall around $2-$4.50 per square foot, but difficult access or finishing can raise it.
Use a thinner alternative only when the plans and intended performance allow it. Three-quarter-inch board may be specified for a particular assembly or project detail; substituting another thickness can change alignment, fastening, fire performance, or acoustic results. Have the designer or qualified contractor confirm compatibility before changing the order.
For a small damaged area, repairing the existing board may cost less than replacing a full wall. A straightforward patch can run about $150-$400, while extensive damage, hidden moisture, or framing repairs can push the quote higher. A patch must match the original assembly closely enough to create a sound, flush surface.
Confirm whether 3/4-inch board is necessary for the full room or only a specific wall or layer. If the specification calls for a specialty assembly, ask for the exact product and required installation method. The least expensive sheet is not a saving if it leads to rework or fails the project requirement.
What to Confirm Before Ordering Thick Sheetrock
Measure each surface and note openings, ceiling height, corners, and delivery access. Check panel dimensions against the route from the truck to the room; a 12-foot sheet may reduce seams but can be impractical in a narrow stairway. Verify how many panels are included and how waste is calculated.
A written, itemized quote makes the 3/4-inch Sheetrock price easier to compare. It should identify the board type and thickness, labor, finish level, delivery, removal, disposal, and any minimum charge. Ask whether taxes, primer, paint, and repairs to framing are excluded so the final bill does not include unexpected work.
For a new installation, confirm the framing and fasteners are suitable for the panel’s weight and the project specification. If the work is part of a permitted remodel or a rated wall assembly, check applicable local requirements before ordering. A contractor’s estimate should explain any code-related or inspection costs that apply to the specific job.