Acrylic cabinet doors typically cost $100-$300 per door for the finished front, or about $5,000-$15,000 for a professionally installed kitchen refacing project. Door size, acrylic finish, edge treatment, hardware, cabinet condition, and local labor rates have the biggest effect on the quote.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Finished acrylic door | $100 | $200 | $300 | Typical standard-size slab front, before installation |
| Finished drawer front | $60 | $120 | $200 | Price varies with dimensions and edge finish |
| Installed kitchen refacing | $5,000 | $9,000 | $15,000 | About 20-30 doors and drawer fronts; cabinet boxes reused |
| Installation labor | $40 | $75 | $125 | Per door or front, excluding unusual repairs |
Assumptions: U.S. pricing for standard-size, made-to-order fronts and sound cabinet boxes; custom sizing, premium acrylic, and high-cost metro labor can exceed these ranges.
Acrylic cabinet doors price by size and kitchen scope
For a standard cabinet door around 12 by 30 inches, buyers commonly pay $100-$250 for a finished acrylic-faced front. Larger pantry doors, wide fronts, color-matched edges, and custom drilling can raise the price to $300 or more each. Smaller drawer fronts generally cost $60-$150, while oversized or unusually shaped pieces may reach $200-$300.
Material pricing is sometimes quoted by area. A useful planning range for fabricated acrylic-faced panels is roughly $35-$80 per sq ft, with the finished door price also reflecting the substrate, edge finishing, machining, and order minimum. That per-square-foot figure is not necessarily comparable to raw acrylic sheet pricing, which excludes a finished cabinet-ready panel.
For a kitchen with 20-30 doors and drawer fronts, the fronts alone may total about $2,500-$7,500. A typical refacing quote that includes removal of old fronts, installation, hinges or adjustments, and finished side panels often lands around $5,000-$15,000. New cabinet boxes are not included; replacing the full kitchen cabinetry is a different, substantially larger project.
For a standard kitchen with reusable cabinet boxes, budgeting around $9,000 is a reasonable midpoint for installed acrylic refacing. The estimate assumes ordinary access, a midrange acrylic finish, and no major cabinet repairs.
What the acrylic door quote includes from panels to labor
Quotes can differ because one covers only door fabrication while another includes measuring, hardware, removal, and fitting. The following ranges show common charges for a kitchen refacing job; they are planning estimates, not fixed line items, and some shops combine several costs.
| Quote component | Typical range | Pricing basis | What it covers | Common cost change |
|---|---|---|---|---|
| Acrylic-faced doors and drawer fronts | $2,500-$7,500 | $60-$300 per front | Panel, substrate, finish, and edge work | Door count, size, gloss or matte grade |
| Installation labor | $1,200-$3,500 | $40-$125 per front | Removal, fitting, alignment, and adjustment | Uneven boxes or complex hardware |
| Hardware and accessories | $300-$1,500 | $10-$60 per item | Hinges, pulls, soft-close parts | Premium or specialty mechanisms |
| Cabinet end panels and trim | $400-$2,000 | $25-$80 per sq ft | Visible sides, fillers, and matching trim | Number of exposed surfaces |
| Removal and disposal | $150-$700 | $5-$25 per front | Taking down and disposing of old fronts | Haul-away distance and material volume |
Not every project needs new hinges. If existing hinges are compatible and in good condition, keeping them may avoid $200-$700 in parts and labor. Some acrylic systems require particular drilling patterns or hinge clearances, so the installer should confirm compatibility before the order is finalized.
Fabrication may include a minimum charge, measuring fee, or delivery charge, especially for a small order. A $100-$300 measurement or setup fee can be significant when replacing only a few doors. Ask whether the quote includes sales tax, delivery, removal, edge finishing, and adjustments after installation.
Comparing itemized quotes is more reliable than comparing a single per-door number.
How door dimensions, acrylic grade, and edge finish shift the estimate
Door count and dimensions are direct price drivers: a 15-by-30-inch front uses more material than a 12-by-24-inch front, and a large pantry door may cost two or three times as much as a small drawer front. A cabinet schedule with exact widths and heights helps vendors price the same scope rather than estimating from a photo.
Acrylic-faced fronts commonly pair a decorative acrylic surface with an MDF or other engineered-wood core. Standard solid colors and straightforward slab construction tend to sit toward the lower end. High-gloss finishes, specialty colors, anti-fingerprint surfaces, matched backs, and premium edge treatments can add roughly 10%-30% to panel pricing, depending on the supplier.
Edge construction matters because the edges are exposed on a slab door. A basic matching edge may be included, while thicker edge details, polished edges, or close color matching can add about $10-$40 per door. Confirm whether the face and edges are the same material and whether the back is finished; those details affect appearance and price.
Kitchen layout also changes labor. A run with 25 simple fronts is usually less complicated than 25 fronts across several corners, appliance panels, and uneven cabinet openings. If the cabinet boxes are out of square by more than about 1/8 inch, installers may need extra adjustment or filler work. Repairs to swollen, loose, or water-damaged boxes can add $200-$1,500 or more.
Hardware specifications should be counted separately. Soft-close hinges may add about $8-$25 each, and pulls can range from $5-$50 or more apiece. If a new handle position requires drilling, measure carefully: replacing incorrectly drilled fronts can cost more than the hardware itself.
Large doors, specialty finishes, and cabinet-box corrections are the main reasons a quote moves well above a basic per-door estimate. A written specification should state dimensions, finish, core, edge, back surface, hinge drilling, and hardware.
Control the acrylic refacing budget before ordering
Keep the existing cabinet boxes when they are structurally sound and the layout works. Replacing only the doors and drawer fronts is generally far less expensive than buying and installing new cabinets. If a few boxes are damaged, compare targeted repairs with full replacement before assuming the entire kitchen needs new cabinetry.
Choose a standard color and edge treatment if the appearance meets the project needs. Specialty colors and custom finishes can raise panel costs without changing the cabinet layout or function. Request pricing for the preferred finish and one simpler alternative so the trade-off is clear.
Reuse compatible hinges and pulls where practical, but do not assume old hardware will fit new drilling or door thickness. Provide the installer with hardware counts and model details before fabrication. Confirm that the quote includes hinge adjustment and that any additional drilling is priced before work begins.
Reduce measurement errors by clearing the cabinet fronts and labeling doors and drawers by location. A professional still needs to verify dimensions, but a complete cabinet list can make the estimate more accurate. Avoid ordering from approximate measurements: made-to-order acrylic fronts may be difficult to return if the dimensions are wrong.
Compare at least three quotes using the same door count, measurements, finish, hardware, removal, delivery, and tax assumptions. Check whether each price includes end panels and fillers, not just visible doors. A low quote that omits those parts may not represent a lower finished-project cost.
The most dependable savings come from controlling specifications and reusing sound components, not from ordering undersized or incompatible fronts. Get the final dimensions and finish approval in writing before production starts.
How long acrylic door installation takes and what labor costs
For a straightforward kitchen with 20-30 fronts, a crew may need about 1-3 days for removal, fitting, and adjustment. Labor commonly works out to $40-$125 per door or front, or roughly $1,200-$3,500 for the full installation. Local rates, crew size, travel, and the condition of the cabinets affect the total.
Fabrication adds lead time beyond the work at the home. Made-to-order fronts may take about 3-8 weeks, depending on the shop, finish availability, and order size. Rush production can add a fee or may not be available for specialty colors. A quote should distinguish production time from installation time.
Installers may charge a minimum visit fee of about $150-$400 for small jobs. Replacing just three doors can therefore cost more per door than ordering a whole kitchen set. A second trip for missing hardware, measurement corrections, or finish issues can also add labor and travel charges.
Door installation itself is relatively quick; accurate measuring and production scheduling often determine the project timeline. Schedule installation after the fronts and hardware have been checked against the order.
Three kitchen quotes show how door count changes total price
These examples use typical U.S. pricing for sound cabinet boxes and exclude new cabinet construction. Actual quotes vary by region, supplier, finish, and job conditions.
| Example scope | Fronts and unit rate | Labor and extras | Estimated total |
|---|---|---|---|
| Small kitchenette, 8 fronts | 8 at $125-$200; $1,000-$1,600 | 10-14 labor hours at $65-$100 per hour, plus $150-$400 delivery and setup | $1,800-$3,400 |
| Typical kitchen, 24 fronts | 24 at $125-$250; $3,000-$6,000 | 20-30 labor hours at $65-$100 per hour, plus $500-$1,200 hardware and panels | $5,500-$10,200 |
| Large kitchen, 36 fronts | 36 at $175-$300; $6,300-$10,800 | 30-45 labor hours at $75-$125 per hour, plus $800-$2,000 hardware and trim | $9,500-$18,400 |
The hourly figures help explain labor budgets; contractors may instead quote per door, per project, or as a combined installation charge. The examples assume ordinary access and no box repair. High-end metropolitan labor, complex end panels, or custom sizes can push totals higher.
Door count provides a useful first estimate, but add-ons and labor minimums make small kitchens cost more per front. For each quote, check that the same number of doors, drawer fronts, and exposed sides is included.
Acrylic doors compared with laminate, thermofoil, and painted fronts
Acrylic is a finished surface choice, not a single construction method. Compared with standard laminate fronts, acrylic often costs more, particularly for high-gloss finishes and carefully matched edges. A basic laminate door may run about $50-$150, while acrylic fronts commonly fall around $100-$300 each, depending on size and finish.
Thermofoil fronts may cost roughly $60-$180 per door and can be less expensive for simple colors. Painted MDF fronts often range from $100-$300 per door, with price affected by finish quality and the number of paint coats. These ranges overlap because size, fabrication, and local labor can matter as much as the surface material.
For a full refacing project, material choice can shift the door package by hundreds or several thousand dollars. Ask for prices on the same dimensions and comparable construction, including edge finish and back surface. A cheaper front may not be an equal comparison if its substrate, finish, or hardware preparation differs.
Repair is worth checking when only a few fronts are scratched or damaged. A local refinishing or replacement quote may be lower for a small number of pieces, but matching an older color or sheen can be difficult. Replacing every front is more consistent visually, while replacing only damaged fronts may preserve a mismatched appearance.
Acrylic is often a premium-priced option, but the fairest comparison is between complete, similarly specified door packages. Ask suppliers to identify the surface, core material, thickness, finish, and included machining.
Regional labor and delivery can add to acrylic door pricing
Installed pricing tends to be higher in major coastal and high-cost metro areas than in lower-cost rural markets. As a broad planning adjustment, urban labor-heavy quotes may run about 10%-25% above a national midrange estimate, while some smaller markets may be 5%-15% below it. These are not guaranteed regional rates; local shop availability and order size can outweigh the general pattern.
Delivery distance matters when a supplier is outside the local area or the order needs careful handling. Delivery and setup may cost $100-$500 for a standard order, with remote locations or special transport potentially higher. Confirm whether the fronts ship to the home, installer, or workshop and who is responsible for checking damage.
Request a local quote that separates fabrication from labor, delivery, and taxes. A regional difference in the labor line is easier to evaluate than a single bundled total, especially if one company includes end panels or old-door disposal and another does not.
Use regional percentages only as a starting budget adjustment; local itemized quotes are the dependable comparison.