Allen + Roth quartz countertops typically cost about $50-$100 per square foot installed, with a midrange project often totaling $2,000-$4,500. The final price depends on the selected color and slab, counter area, edge profile, sink cutouts, removal, and local installation rates; Lowe’s availability and quotes can vary by location.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Installed quartz countertop | $50 per sq ft | $75 per sq ft | $100 per sq ft | Fabrication and standard installation; project minimums may apply |
| Material only | $25 per sq ft | $45 per sq ft | $70 per sq ft | Indicative allowance; product format and selection affect price |
| Small kitchen, 30 sq ft | $1,500 | $2,250 | $3,000 | Standard layout, before major extras |
| Typical kitchen, 45 sq ft | $2,250 | $3,375 | $4,500 | One sink cutout and ordinary access assumed |
| Large kitchen, 65 sq ft | $3,250 | $4,875 | $6,500 | Complex layouts or premium details can raise totals |
What Allen + Roth quartz costs for a kitchen
For budgeting, a typical installed price is $50-$100 per square foot, including the countertop material, templating, fabrication, and standard installation. A straightforward 45-square-foot kitchen therefore comes to roughly $2,250-$4,500, with about $3,375 as a useful planning midpoint. The estimate assumes a standard thickness, ordinary edge, one sink opening, and no substantial cabinet or plumbing work.
Material-only allowances commonly fall around $25-$70 per square foot, but a store’s current price may be listed by slab, by square foot, or as part of a full-service quote. Confirm whether fabrication and installation are included before comparing a product price with another contractor’s installed price. Assumptions: U.S. midrange labor, standard quartz selection, typical kitchen access, and no unusual structural work.
For a normal 45-square-foot kitchen, plan on approximately $2,250-$4,500 installed before optional upgrades. Local measurement and a written quote are needed for a firm figure.
How fabrication and installation appear on the quote
A countertop quote combines the stone with the work required to turn it into finished counters. Some Lowe’s projects are priced as a package, while other estimates list fabrication, installation, and extras separately. Request an itemized quote that identifies the product, included square footage, edge choice, cutouts, removal, delivery, and any minimum charge.
| Quote component | Typical price range | Common billing basis | What changes the charge |
|---|---|---|---|
| Quartz material | $25-$70 per sq ft | Square foot or slab | Color, pattern, availability, and product format |
| Fabrication and standard labor | $20-$45 per sq ft | Square foot or project | Layout, seams, edge work, and local shop rates |
| Templating and installation | $300-$900 | Project fee or included package | Travel, site access, and project size |
| Sink or cooktop cutout | $150-$400 each | Per opening | Opening type, polishing, and installation details |
| Old counter removal and disposal | $200-$600 | Project or linear-foot charge | Counter material, weight, and disposal rules |
Labor may be charged as a bundled rate rather than an hourly line. For a separately quoted crew, a rough budgeting rate is $50-$100 per worker-hour; fabrication shop time is not necessarily billed at the same rate. Ask whether the quote covers a second visit if cabinets need adjustment or the initial template reveals a fit issue.
The most useful comparison is the complete installed total, not a material-only price. Check that every bidder has priced the same area, cutouts, removal, and edge profile.
Why slab layout, color, and edge profile change the price
Counter area is the first major driver: every extra 10 square feet adds about $500-$1,000 at the installed range above. However, the shop may need to charge for a full slab even when the finished counter uses less material. Ask how slab yield, remnants, and any unused material are handled, particularly for a compact kitchen with an unusual layout.
Color and pattern can influence stock availability and material pricing. A simple, readily available pattern may fit the lower end of the allowance, while a sought-after design or limited stock can push the quote higher or lengthen lead time. Do not assume every Allen + Roth quartz design carries the same price; obtain the specific product name and current local quote.
Thickness, seams, and edge details also affect fabrication. A standard eased edge is generally less expensive than a decorative profile, while thick-looking built-up edges require added work and material. If a run exceeds the slab’s usable length, the fabricator may need a visible seam or an additional slab, which can change both appearance and cost.
Layout and slab yield can matter as much as the measured square footage. Request a drawing or template plan showing seams, overhangs, and how the selected slab will be used.
When cutouts, overhangs, and cabinet work add extra charges
Each sink, faucet, soap dispenser, or cooktop opening may require a separate cutout or finishing charge. A sink cutout can run $150-$400, while additional small openings may add roughly $50-$150 apiece depending on the fabricator and finish. Undermount sinks can involve extra edge polishing and support hardware; verify whether the sink itself, clips, and installation are included.
Overhangs beyond ordinary countertop depth may need brackets or other support. An overhang of about 10-12 inches, especially near a seating area, can trigger reinforcement requirements based on the quartz manufacturer’s specifications and cabinet construction. Added supports may cost $100-$500 or more, depending on quantity and installation access.
Cabinets must be level, secure, and capable of supporting the countertop. Correcting an uneven run could add $200-$800 for carpentry or adjustments, while repairs to damaged or weak cabinets can cost more. Plumbing reconnection, backsplash replacement, and wall repair are also commonly separate from the countertop installation price.
Confirm cutouts, support, cabinet preparation, and plumbing in writing before approving the order. These items are frequent reasons a low initial estimate grows after measurement.
How regional labor rates affect installed quartz prices
Prices tend to be higher in large coastal cities and other high-cost metropolitan areas than in many smaller markets. As a planning adjustment, a dense metro area may quote 10%-25% above a national midrange estimate, while a lower-cost rural market may come in 5%-15% below it. These are broad comparisons, not guaranteed regional price lists; local competition, travel, and availability also matter.
For a 45-square-foot kitchen, applying a 10%-25% metro premium to a $3,375 midpoint suggests roughly $3,713-$4,219 before unusual extras. A 5%-15% discount from that midpoint suggests about $2,869-$3,206 in a lower-cost area. Quotes can still exceed these examples if the job has multiple seams, difficult access, premium selections, or extensive removal.
Local labor is only part of the difference. Delivery distance, warehouse stock, installer scheduling, disposal fees, and required inspections may vary by city or county. Compare at least two itemized estimates from providers working in the same area and confirm whether each uses the same Allen + Roth selection and scope.
Use regional percentages only for an early budget; local written quotes are more reliable. A nearby installer’s measurement and current product availability can materially change the estimate.
How long templating, fabrication, and installation take
After the cabinets are ready, a typical sequence includes a measurement visit, fabrication, and installation. Templating often takes about 1-2 hours on site; fabrication may take 5-10 business days after final approval, and installation commonly takes 4-8 hours for a standard kitchen. Product availability, shop workload, and the number of seams can extend the schedule.
Installation time is not the same as total project time. A delay in sink delivery, cabinet repairs, plumbing coordination, or slab selection can add days or weeks. If the old countertop must be removed before a new template is made, the home may be without a working counter between visits, depending on the installer’s process.
Ask when the price becomes fixed, how long the quote remains valid, and whether a rescheduled or return visit costs extra. A rush fee may add $200-$600 or more when expedited fabrication or a special delivery window is available. Not every shop offers rush service, and a compressed schedule should not replace accurate templating.
Allow roughly one to three weeks from final selection to installation, with longer waits possible for special orders. Get the estimated template and install dates in writing.
Which quote choices reduce the Allen + Roth total
Keeping the existing layout is often the simplest way to control the bill. Moving a sink, changing cabinet runs, or adding a new peninsula can require extra templating, cutouts, plumbing, and support. If cabinets are sound, retaining them and choosing a standard edge can avoid several hundred dollars in secondary work.
Choose a stocked color after comparing its actual installed quote, not just its material price. A visually similar in-stock option may reduce wait time or avoid special-order charges, but color and pattern should be checked against a physical sample where possible. Limiting unnecessary faucet holes and decorative edge details can also reduce fabrication fees.
Prepare the room by clearing counters and ensuring installers have a safe path, but do not remove plumbing or cabinets unless the installer explicitly requests it. Self-removal can damage cabinets or walls and may void an installation allowance. For old counters, compare the installer’s removal fee with local disposal options, including any required hauling or landfill charge.
Preserving the footprint, selecting a standard edge, and comparing stocked colors are practical cost controls. Obtain revised written totals so a lower material allowance is not offset by higher labor or delivery fees.
Allen + Roth quartz compared with laminate and granite
Laminate is usually a lower-cost alternative, commonly around $20-$50 per square foot installed, and may suit a tight budget when a stone appearance is not essential. It does not offer the same quartz surface construction, and its seams and repair options differ. Replacing laminate later can also add disposal and new installation costs.
Granite often costs about $55-$120 per square foot installed, although local selection and fabrication can put it below or above that range. Natural stone slabs vary more in pattern, may require periodic sealing, and can have different maintenance needs. Quartz generally avoids routine sealing, but it is not indestructible and can be damaged by excessive heat or impact.
Within quartz, compare Allen + Roth’s specific product and complete installation quote against other brands, rather than assuming brand names predict quality or price. Review warranty terms, surface-care instructions, seam placement, and who handles measurement and installation. A lower bid may exclude removal, cutouts, or sink attachment, so compare the full scope.
Laminate can reduce upfront spending, while granite and quartz quotes overlap depending on selection and location. The best price comparison uses equivalent square footage, edges, cutouts, removal, and warranty coverage.
Three sample kitchen quotes by size and scope
The examples below use illustrative installed rates and add-ons, not official Lowe’s prices. Actual quotes depend on the selected Allen + Roth product, local provider, and site measurement. They show how square footage and scope can move a total even when the base rate is similar.
| Project | Area and assumed rate | Extras | Illustrative total |
|---|---|---|---|
| Compact galley | 30 sq ft at $62 per sq ft | $250 sink cutout and $250 removal | $2,360 |
| Standard family kitchen | 45 sq ft at $75 per sq ft | $300 cutout and $400 removal | $4,075 |
| Large kitchen with island | 65 sq ft at $88 per sq ft | $600 cutouts and supports, $500 removal | $6,820 |
The compact example assumes a simple layout and standard access. The middle example includes a typical single sink opening and removal allowance. The large kitchen assumes more fabrication and support work, but excludes major cabinet repairs, plumbing relocation, taxes, and premium edge details.
Use these scenarios as comparison points, then replace the assumptions with measured square footage and itemized local charges. A countertop installer’s final template and written scope determine the actual price.