Alside vinyl siding typically costs about $7,000-$18,000 installed for an average-size U.S. home, with many projects averaging near $12,000. The Alside vinyl siding cost depends on the home’s wall area, product line and profile, local labor rates, trim details, and whether old siding must be removed.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Installed siding project | $7,000 | $12,000 | $18,000 | Typical 1,800-2,200 sq ft home; uncomplicated walls |
| Installed price per wall sq ft | $4.50 | $7.50 | $11 | Includes standard materials and installation |
| Siding material only | $1.50 | $3.25 | $5.50 | Varies by Alside collection, thickness, and profile |
| Removal and disposal | $1,000 | $2,000 | $4,000 | Additional for multiple layers or difficult access |
Alside Vinyl Siding Installed Prices for Typical Homes
Installed prices commonly fall between $4.50 and $11 per square foot of exterior wall area. A straightforward 1,500-square-foot ranch may cost $6,500-$12,000, while a 2,500-square-foot two-story home may run $12,000-$25,000. These are project estimates, not prices based on the home’s interior floor area; the exterior wall measurements, openings, gables, and layout determine the siding quantity.
For a standard product and uncomplicated installation, a practical budget is $7,000-$18,000. The low end generally assumes a smaller home, basic color and profile, accessible walls, and little repair work. Higher quotes can reflect premium Alside selections, complex architecture, regional labor costs, tear-off, new house wrap, or replacement of damaged trim and sheathing.
For a typical home with standard Alside vinyl and normal access, budgeting around $6-$9 per wall square foot installed is a useful starting point. Assumptions: U.S. pricing, standard-quality siding, professional installation, and no major structural repairs.
What Alside Siding Quotes Include From Panels to Trim
A quote should identify the siding collection or product specification, measured wall area, included trim, and whether installation includes a weather barrier. Installers may price the product and labor together, so the amount assigned to each line varies. The following ranges illustrate common portions of a midrange project and may not add exactly to a contractor’s total.
| Quote item | Low | Average | High | Typical basis |
|---|---|---|---|---|
| Alside panels and starter materials | $1.50/sq ft | $3.25/sq ft | $5.50/sq ft | Product line, profile, thickness, and color |
| Installation labor | $2.50/sq ft | $4.25/sq ft | $6.50/sq ft | Wall preparation and layout complexity |
| Trim, corners, and J-channel | $500 | $1,200 | $2,500 | Openings, corners, fascia details, and finish |
| House wrap and flashing | $400 | $1,000 | $2,000 | Replacement or installation over exposed sheathing |
| Delivery and disposal | $300 | $900 | $2,000 | Material delivery, dumpster, and debris handling |
| Permits and inspections | $0 | $150 | $500 | Local requirements and project scope |
Some quotes include accessories in a per-square-foot rate; others itemize them. Check whether the contractor includes starter strips, corner posts, window and door trim, utility blocks, flashing, caulk, and waste allowance. A material allowance is particularly important when the estimate is based on a preliminary measurement rather than a confirmed order.
Compare the full scope and specified Alside product, not just the headline per-square-foot rate. A low bid may leave out removal, weatherproofing, or trim that another contractor has included.
How Home Size, Profile, and Tear-Off Change the Quote
Exterior wall area is the central measurement. A home with 1,500 square feet of wall surface may need roughly 1,650-1,725 square feet of siding ordered after allowing 10%-15% for cutting and waste. Numerous gables, dormers, bay windows, or angled walls can increase waste beyond a simple rectangular layout. Ask whether the quote lists measured wall area separately from the order quantity.
Product choice also matters. Alside offers multiple vinyl siding collections and appearances, and prices depend on the selected product, profile, color, and availability. A basic lap profile can cost less than a premium or distinctive profile. Thicker or higher-performance products may carry a material premium of roughly $0.50-$2.50 per square foot compared with an entry-level selection, depending on dealer and market.
Removing old siding usually adds $1-$3 per wall square foot, or approximately $1,500-$4,500 on a 1,500-square-foot wall area. One layer of vinyl is generally less costly to remove than heavy or layered siding. Repairing sheathing can add $2-$6 per square foot of affected area; localized repairs may be modest, but widespread rot or water damage can substantially change the quote.
Labor is often estimated by area, but a crew’s effective rate can be expressed as . For example, 100 labor hours at $55-$85 per hour represents $5,500-$8,500 in labor before other project expenses. More stories, corners, penetrations, and hidden damage can raise labor hours even when two houses have similar wall area.
How Long Does Alside Siding Installation Take?
A professional crew of three or four may install siding on a straightforward one-story home in about 4-7 working days. A larger two-story house, complicated rooflines, extensive trim, or removal of existing siding can extend work to 1-2 weeks. These timelines describe on-site installation; ordering materials, permit review, and scheduling may add several weeks before the crew begins.
Labor pricing varies by market and installer, but a rough range is $55-$85 per worker-hour as a project-cost equivalent. Contractors often quote by the job rather than by the hour, and crew productivity differs with access, weather, wall condition, and experience. A quote that includes a fixed labor price should still state how unexpected repairs are priced and who approves them.
Weather can interrupt installation because siding work requires safe access and appropriate conditions for cutting, fastening, and sealing associated details. Schedule pressure may also affect cost: a rush request or a narrow work window can add roughly 5%-15% where contractors charge for expedited scheduling. Allow time for inspection of exposed walls before installation resumes if tear-off reveals damage.
Alside Vinyl Siding Prices by U.S. Region
Labor and disposal costs create significant geographic differences. Relative to a typical national estimate, installed prices in lower-cost rural or Southern markets may be about 5%-15% below the midpoint, while high-cost Northeast and West Coast metro areas can run 15%-30% above it. These are broad comparisons; a nearby city, contractor backlog, and travel distance can matter more than the region label.
In a lower-cost market, a standard 2,000-square-foot home might receive a straightforward quote around $8,000-$14,000. The same scope in a high-cost metro could be closer to $11,000-$20,000, especially if permits, disposal, and detailed trim are included. Premium product selections and difficult access can push either estimate higher.
Local climate and building practices may affect the work included. Wind exposure, moisture management, insulation requirements, and local code can lead to additional fastening, flashing, or weather-barrier work. Rather than treating regional averages as guaranteed prices, compare at least three local written estimates based on the same measured area and product specification. Regional price differences are most useful as a screening tool, not a substitute for local bids.
When Existing Siding Removal Adds $1-$3 Per Square Foot
Leaving existing siding in place may lower the upfront estimate, but it is only appropriate when the wall condition and local rules allow it and the installer approves the method. Installing over old material can conceal rot, insect damage, leaks, or uneven surfaces. It may also affect window and door details, wall thickness, and the finished appearance. Ask the contractor to state whether the proposal includes removal or installation over the existing exterior.
Removal and disposal for one accessible layer of vinyl may add about $1-$2 per square foot. Difficult tear-off, multiple layers, heavy materials, or a limited-access site can increase the charge to $2-$3 or more per square foot. A dumpster, hauling, and disposal fees may be included in that rate or billed separately, so check for a distinct line item and any minimum charge.
After removal, sheathing repairs are often priced by the affected area, not the whole house. Contractors may quote $2-$6 per square foot for replacement sheathing, plus labor or flashing work where needed. Because concealed damage cannot always be measured in advance, the estimate should explain the unit price and require approval before additional repairs are performed. Keep a contingency of roughly 5%-10% when the existing wall condition is unknown.
Three Alside Siding Quotes for Different House Sizes
The examples below use estimated wall area, standard Alside vinyl selections, professional installation, and ordinary access. They show how total price and unit cost change with scope; actual bids vary by local labor, product availability, trim package, and whether the existing exterior needs removal.
| Home scenario | Wall area | Included scope | Estimated total | Approximate rate |
|---|---|---|---|---|
| Small one-story ranch | 1,200 sq ft | Standard panels, trim, installation; no tear-off | $6,500-$10,500 | $5.40-$8.75/sq ft |
| Average two-story home | 1,800 sq ft | Midrange product, wrap, trim, removal | $11,000-$18,000 | $6.10-$10/sq ft |
| Large home with gables | 2,600 sq ft | Upgraded profile, detailed trim, tear-off | $19,000-$31,000 | $7.30-$11.90/sq ft |
For the small ranch, a crew might spend 60-90 labor hours; at $55-$85 per hour, the labor equivalent is approximately $3,300-$7,650, with the remainder covering materials, trim, overhead, and delivery. The average two-story project could require 100-150 hours, especially when removal and window detailing are included.
The large-home estimate reflects more waste, additional corners, and more complex gables, not simply a higher material grade. A quote well above the range may still be reasonable if it includes extensive repairs, insulation, premium accessories, or high-cost metro labor. Ask each bidder to separate product, labor, removal, and repairs so the example closest to the house can be adjusted fairly.
Ways to Lower an Alside Siding Estimate Without Cutting Corners
Start by controlling the scope. Choose a specific Alside collection, profile, and color before requesting final bids, and use the same specifications for each contractor. Compare included trim and weatherproofing, not just panel cost. Standard colors and common profiles may be easier to source than special-order choices, although availability varies by distributor.
Ask whether existing trim, soffit, or fascia can remain if it is sound and compatible with the new installation. Avoid paying to replace components that do not need work, but do not omit flashing or necessary water-management details to lower a bid. If siding removal is required, combining it with related exterior work may reduce duplicated delivery, setup, or disposal charges.
Scheduling during a contractor’s less-busy period may improve availability, though seasonal discounts are not guaranteed. Flexible timing can help avoid rush fees and make it easier to compare proposals. Homeowners can also reduce change orders by clearing shrubs, moving outdoor furniture, and arranging access before the crew arrives, if the contractor confirms those tasks are safe and appropriate.
Get three itemized written quotes and check the proposed product, wall measurements, waste allowance, labor scope, removal, disposal, repairs, payment schedule, and workmanship warranty. Confirm that any allowance for hidden damage has a stated unit price and approval process. The most reliable savings come from matching the scope accurately and preventing avoidable change orders, rather than choosing the lowest incomplete bid.