Aluminum siding prices at Home Depot depend on whether suitable panels are available locally or online, plus the siding’s profile, gauge, trim, and delivery cost. For a typical 1,500-square-foot siding area, materials may run about $3,000-$7,500, while a contractor-installed project can reach $7,500-$18,000 or more after removal and repairs.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Aluminum siding material | $2 per sq ft | $3.50 per sq ft | $5 per sq ft | Panel pricing varies by gauge, finish, profile, and availability. |
| Materials for 1,500 sq ft | $3,000 | $5,250 | $7,500 | Before trim, waste, delivery, and removal. |
| Installed siding | $5 per sq ft | $8 per sq ft | $12 per sq ft | Labor and standard installation; site conditions affect totals. |
| Installed 1,500-sq-ft project | $7,500 | $12,000 | $18,000 | Typical planning range, excluding major sheathing repairs. |
What a Home Depot aluminum siding order may cost
Budget about $2-$5 per square foot for panels and roughly $5-$12 per square foot installed. These are planning ranges, not guaranteed Home Depot shelf prices: aluminum siding may be limited by store, region, and current inventory, and some products require a special order. Buyers should confirm the exact product, profile, color, quantity, and delivery charge with the local store or current listing before comparing quotes.
For a straightforward 1,500-square-foot exterior, panel material alone commonly totals $3,000-$7,500. Add starter strips, corners, J-channel, fasteners, flashing, and waste, and the material package may reach $3,800-$9,000. A contractor installation often brings the complete bill to $7,500-$18,000 when existing siding removal is modest and the wall underneath is sound.
The square-foot figure refers to siding coverage, not the home’s floor area. A 1,500-square-foot house may have substantially more or less exterior wall area depending on height, shape, gables, and openings. A takeoff based on measured wall faces is more useful than a house-size estimate. Assumptions: standard residential lap siding, ordinary access, mid-range materials, and no extensive wall reconstruction.
How panel, trim, and labor charges build the quote
Trim and labor can add as much as the panels themselves on a small or detail-heavy exterior. The ranges below show common U.S. budgeting allowances; contractors may bundle components rather than price each line separately. Home Depot product prices, if available, should be checked against the same coverage area and included accessories.
| Quote component | Typical price | Unit or scope | What changes it | Budget note |
|---|---|---|---|---|
| Aluminum panels | $2-$5 | Per sq ft | Gauge, finish, profile | Order extra for cuts and damage. |
| Trim and accessories | $0.75-$2.50 | Per sq ft of wall | Corners, openings, gables | May be priced by piece or linear foot. |
| Labor | $2.50-$6 | Per sq ft | Removal, height, wall shape | Complex work can exceed this range. |
| Old siding removal | $1-$3 | Per sq ft | Material, layers, disposal | Lead or hazardous-material work costs extra. |
| Delivery and disposal | $100-$700 | Per project | Distance, order size, debris | Confirm charges before checkout. |
Contractor labor is often estimated using area, openings, and job difficulty rather than a simple hourly bill. For a crew working 80-140 labor-hours at a combined $50-$90 per hour, labor represents roughly $4,000-$12,600 before separate removal charges. Ask whether the quote includes house wrap, flashing, starter strips, corner posts, caulking, cleanup, and tax.
Material-only budgets can understate the project because siding needs compatible trim and fasteners. A store cart with panels but no finish pieces is not equivalent to a contractor’s complete material estimate. Assumptions: standard-height walls, ordinary disposal, and no permit or structural repair allowance.
How wall area, panel gauge, and finish change pricing
Measured coverage and the number of corners and openings are usually stronger price drivers than the home’s advertised square footage. A simple rectangular exterior uses material efficiently; multiple gables, dormers, bump-outs, and narrow wall sections create more cuts and offcuts. Contractors commonly add 5%-10% for waste on uncomplicated layouts and 10%-15% when the design is intricate.
For example, 1,500 square feet of measured wall coverage may require 1,575-1,725 square feet of purchased panels once waste is included. At $2-$5 per square foot, that adds about $150-$1,125 compared with ordering exactly the measured area. The correct allowance depends on panel length, layout, and whether usable offcuts can be reused.
Panel thickness and finish also matter. Lighter, basic panels may cost toward the lower end, while heavier-gauge panels, special colors, and premium coatings may approach or exceed $5 per square foot. Ask the seller for the product’s stated thickness or gauge, coverage dimensions, warranty terms, and matching trim options; product names alone may not establish equivalent quality.
Wall height can trigger additional labor or access charges. Two-story walls, steep grades, and tight spaces for ladders or lifts may add 10%-25% to labor compared with an accessible one-story job. Replacing damaged sheathing can add about $2-$5 per square foot of repaired area, while limited framing repairs are often quoted separately. Assumptions: the quoted wall area includes gables and excludes window and door openings only when the contractor’s measuring method specifies that deduction.
What installation labor includes and how long it takes
A typical crew needs about 5-10 working days for an uncomplicated 1,500-square-foot exterior. A small one-story home may take 3-5 days; two-story elevations, extensive tear-off, weather delays, or repairs can stretch work to 1-3 weeks. Crew size, weather, access, and the availability of trim pieces can change the schedule.
Installation usually involves protecting the site, removing existing cladding if specified, checking the substrate, installing flashing and a water-resistive barrier as needed, fitting trim, fastening panels, and cleaning up. Not every quote includes all these tasks. A low bid may exclude house wrap, window flashing, disposal, or replacement of rotten sheathing, so the price needs to be compared with the same written scope.
Hourly pricing is less common for a complete siding installation, but diagnostic or repair visits may be billed at $75-$150 per hour, sometimes with a minimum charge. A small repair can cost $250-$800 because matching older colors and profiles may take time, even if only a few panels need replacement. Assumptions: one experienced installation crew, normal weekday access, and no major weather interruption.
Home Depot panels compared with contractor-supplied siding
A store price is useful only when its product specification and included components match the contractor’s estimate. Depending on location and inventory, Home Depot may show aluminum products, related accessories, or special-order options rather than a complete in-stock siding system. Confirm that panels are intended for exterior siding and that the supplier can provide compatible corners, channels, starter strips, and replacement pieces.
Buying panels directly can make material costs easier to inspect, but it transfers ordering, quantity calculations, pickup or delivery coordination, and shortage risk to the homeowner. A contractor-supplied package may cost more per panel but include measured quantities, matching trim, freight, and a defined warranty process. Ask whether the installer will work with owner-supplied materials and who pays for reorders if panels arrive damaged or the color lot does not match.
| Purchase route | Panel allowance | Typical added expense | Price comparison point |
|---|---|---|---|
| Retail or special order | $2-$5 per sq ft | $100-$700 delivery; trim extra | Verify stock, coverage, return limits. |
| Contractor-supplied package | $3-$6 per sq ft equivalent | May include freight and waste | Check brand, gauge, trim, warranty. |
| Owner-bought material plus labor | $2-$5 per sq ft panels | Labor may be higher or unavailable | Confirm quantities and installer terms first. |
Return policies matter because special-order colors or cut pieces may not be returnable. Before paying, compare the item number, panel dimensions, finish, and coverage per carton across suppliers. A lower listed price can become more expensive if shipping, trim, and minimum order quantities are not included.
Three aluminum siding quotes for different home sizes
Project totals rise with wall area, but architectural detail can make a smaller job more expensive per square foot. These examples use illustrative installed rates and should not be treated as a local quote. They assume ordinary access and standard materials, with no extensive sheathing or framing repairs.
| Example | Measured area | Work assumptions | Estimated total |
|---|---|---|---|
| Small one-story exterior | 900 sq ft | $5-$8 per sq ft installed; limited removal | $4,500-$7,200 |
| Typical 1,500-sq-ft siding area | 1,500 sq ft | $7-$10 per sq ft; trim and routine cleanup | $10,500-$15,000 |
| Detailed two-story exterior | 2,200 sq ft | $9-$12 per sq ft; more access and cuts | $19,800-$26,400 |
In the second example, a midpoint estimate of $8 per square foot produces a $12,000 installed price. If removing old siding adds $1.50 per square foot, that scope adds another $2,250, before any hidden wall repairs. A separate allowance for 5%-10% panel waste may be included in the material quote or charged through the ordered quantity, so it should not be counted twice.
For a detailed two-story home, a lift, steep grade, or numerous gables can push a quote above the example range. Ask for a measured elevation, itemized allowances, and written exclusions. Assumptions: project rates include standard installation labor and basic accessories; taxes and major substrate repairs are excluded.
Regional labor and delivery can shift the final bill
Local labor markets and freight commonly move an otherwise similar quote by 10%-25%. Dense metropolitan areas and high-cost coastal markets often price toward the upper end because labor, insurance, and overhead are higher. Smaller towns may have lower hourly rates, but a distant supplier or installer can add travel and delivery fees that erase some of the difference.
For a $12,000 mid-range project, a 10%-25% regional difference represents about $1,200-$3,000. The percentage is a planning comparison, not a dependable local surcharge. Extreme weather, contractor backlog, and limited access to matching aluminum products can create additional variation that does not follow a simple regional average.
Request at least two or three bids from contractors serving the same area, and make sure each bid uses the same wall-area estimate and scope. Compare the delivery destination and unloading arrangements for Home Depot orders as well: long panels may require special handling, and store pickup may not be practical without a suitable vehicle. Assumptions: percentage comparisons hold project scope and product quality constant.
Lower the siding bill by controlling the order and scope
The most reliable savings come from preventing overordering and comparing complete scopes, not choosing panels by price alone. Measure each wall separately, subtract openings only according to the supplier’s method, and use a modest waste allowance that reflects the layout. Have a contractor or experienced supplier verify the takeoff before placing a large special order.
Retain sound existing trim or remove only the cladding that needs replacement when the assembly and local code allow it. Avoid paying to replace intact gutters, soffits, or accessories simply because siding work is underway. However, do not cover wet or damaged sheathing; repairing it before new panels go up can prevent a larger repair later.
Get written bids that separate panels, trim, labor, removal, disposal, delivery, and repairs. This reveals whether a low total leaves out essential work. Ask each contractor to price the same finish and gauge, state the expected labor duration, and identify charges for change orders. If a price seems far below the others, check whether flashing, house wrap, or cleanup is excluded.
Scheduling during a contractor’s less busy period may improve availability, though seasonal discounts are not guaranteed. Avoid rushing a job after storm damage unless the exterior is exposed or unsafe; temporary protection can allow time to compare replacement quotes. Assumptions: savings depend on local labor availability, product stock, and whether existing components remain serviceable.
When repair costs less than replacing every panel
Localized repairs can be economical when damage is limited and a compatible panel can be found. A small repair may cost $250-$800, while a larger patch involving several panels, trim, and flashing may run $800-$2,000. Matching faded siding can be difficult, so repair pricing depends on access to the original profile and color as much as on the number of panels.
Replacement becomes more defensible when corrosion, loose panels, storm damage, or failed flashing affects multiple elevations. A full re-side can also make sense when the existing system is near the end of its useful life or underlying problems require removal anyway. Compare repair and replacement bids using the same assessment of moisture damage, rather than assuming that new panels alone solve water intrusion.
Ask whether the contractor can source reclaimed or replacement panels, and whether a repair will preserve the existing warranty. Painting may refresh appearance, but surface preparation and coating condition affect durability; it is not a substitute for replacing corroded panels or correcting a leak. Assumptions: repair ranges cover ordinary residential access and exclude concealed structural damage.