Andersen windows typically cost $700-$1,600 per installed window, with an average near $1,100 for a standard replacement using a midrange model. The Andersen window price depends on series, size, glass package, frame material, installation complexity, and local labor rates.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Installed replacement window | $700 | $1,100 | $1,600 | Common sizes and standard access |
| Window unit only | $300 | $850 | $1,800 | Varies by series and configuration |
| Installation labor | $200 | $400 | $800 | Per window; more for difficult openings |
| Whole-home replacement, 10 windows | $7,000 | $11,000 | $16,000 | Before extensive repairs or upgrades |
What Andersen replacement windows cost per opening
For a standard vinyl-clad or Fibrex composite replacement window, homeowners commonly budget $700-$1,600 installed per opening. A basic 100 Series unit may land near the lower end, while larger 400 Series or custom-configured windows can reach or exceed the upper end. Premium A-Series products and specialty shapes may cost substantially more.
A practical average is about $1,100 per window installed, assuming a standard-sized opening, midrange product, ordinary removal, and no major framing repairs. New-construction installation, custom sizing, unusual trim, or premium glass can change the estimate.
Assumptions: U.S. pricing for a typical replacement project, standard materials, normal access, and no structural repairs.
How the window, labor, and removal shape the quote
Quotes may separate the product from installation or combine them into one per-opening rate. The following ranges are common budgeting estimates, not fixed manufacturer prices; dealer packages and local labor affect the actual split.
| Quote item | Low | Average | High |
|---|---|---|---|
| Andersen window unit | $300 | $850 | $1,800 |
| Installation labor | $200 | $400 | $800 |
| Removal and disposal | $40 | $90 | $200 |
| Interior or exterior trim | $50 | $150 | $400 |
| Opening repair allowance | $0 | $150 | $600+ |
Removal and disposal may be included in a contractor’s labor rate, so buyers should check the quote before adding this line item. Rot repair, lead-safe work in older homes, and new flashing can create additional charges.
Window units are usually the largest single cost, but labor and repairs can materially change the installed total.
How size, glass, and Andersen series change pricing
Size is a major driver: a standard single-hung or double-hung unit around 3 by 5 feet usually costs less than a picture window over 20 square feet. Large openings may need stronger glass, added crew time, or structural work. Custom widths or heights can also add lead time and product cost.
Glass upgrades affect price and performance. Low-E coatings and argon-filled insulated glass are common, while impact-resistant glass, triple-pane packages, sound reduction, and special shapes typically cost more. A standard upgrade may add roughly $50-$250 per window; specialized glass can add $200-$600 or more.
Andersen’s 100 Series uses Fibrex composite and generally targets a lower price point than the 400 Series, which offers more configuration choices and wood interiors. A-Series products are positioned at the premium end. Moving from a basic series to a premium line can add several hundred dollars per opening.
Where homeowners can trim the Andersen window budget
Keeping the existing opening size can avoid framing changes and reduce labor. Standard colors, common operating styles, and stock dimensions are usually less costly than custom finishes or shapes. Buyers can also compare a quote with and without optional grids, specialty hardware, or glass upgrades to see which additions matter to the project.
For a whole-home order, request itemized pricing for the same series, dimensions, glass package, and installation scope from at least three local contractors. Compare warranty terms and clarify whether the price includes removal, disposal, flashing, trim, permits, and cleanup. Matching the scope line by line is more useful than comparing bottom-line totals alone.
How installation location changes the per-window price
Labor rates and contractor availability vary. As a broad estimate, installed prices in lower-cost rural and Midwestern markets may be 5%-15% below a national-style budget, while high-cost coastal metros can run 15%-30% higher. These are planning adjustments, not guaranteed regional prices; product selection and project access still matter.
Upper-floor windows, tight interior access, and homes requiring extensive protection or staging may add $100-$400 per opening. Local permit rules differ, and permit or inspection charges can range from about $50-$300 for a project when required. Ask whether the contractor is including fees in the proposal.
Use regional adjustments as a starting point, then rely on written local bids for a realistic total.
How long a 10-window Andersen installation takes
A standard replacement crew of two or three installers may complete 8-12 accessible windows in one to two days. A basic opening can take roughly 2-4 labor hours, including removal, setting, sealing, and cleanup. Larger units, multi-story access, interior finish work, or hidden water damage can extend the schedule.
Installation labor often works out to about $75-$150 per crew hour, though contractors typically quote per window or per project rather than billing an hourly rate. Confirm whether the estimate includes interior casing and exterior capping; those finish tasks can add hours and materials.
Project duration is not the same as total labor hours because installers work as a crew. Production or custom windows may also require several weeks of lead time before installation.
Three Andersen window quotes for common projects
A basic replacement scenario might include five 100 Series double-hung windows, standard glass, and easy first-floor access. At $700-$950 each installed, the estimated total is $3,500-$4,750. This assumes no rot repair and standard trim.
A midrange project with ten 400 Series double-hung windows, Low-E glass, removal, and routine finishing might run $9,000-$14,000, or $900-$1,400 per opening. A premium project with six large A-Series units, upgraded glass, and second-floor access could cost $10,800-$16,800, or $1,800-$2,800 per window.
These examples illustrate how series and site conditions change totals; custom dimensions and regional labor can move them outside the ranges. A quote should list each opening’s size, model, glass, installation method, and included repairs.