Azul Platino granite typically costs $55-$100 per square foot installed, with many standard kitchen projects landing near $75 per square foot. Slab grade, countertop dimensions, edge details, cutouts, removal, and local labor rates can move a quote substantially; material-only prices are usually lower than installed totals.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Granite material | $30/sq ft | $45/sq ft | $65/sq ft | Stone price varies by supplier and slab selection |
| Installed countertop | $55/sq ft | $75/sq ft | $100/sq ft | Typical fabrication and installation included |
| 30-sq-ft kitchen | $1,650 | $2,250 | $3,000 | Standard layout, excluding major add-ons |
| Sink cutout | $150 | $250 | $400 | Often quoted separately from countertop area |
What Azul Platino granite costs for a kitchen countertop
For a typical 30-square-foot kitchen, a straightforward Azul Platino installation costs about $1,650-$3,000, with an average near $2,250. The estimate assumes a standard 3-cm slab, ordinary access, one sink cutout, basic edge finishing, and no major cabinet or plumbing changes. A larger kitchen or an unusually detailed layout can exceed this range.
Material alone commonly runs $30-$65 per square foot, or about $900-$1,950 for 30 square feet. Fabrication and installation bring the typical combined rate to $55-$100 per square foot. Some shops price by slab rather than net countertop area, so remnants and unusable offcuts may affect the material charge.
A practical planning figure is $70-$85 per square foot installed for a standard, mid-market job. A quote well below $55 per square foot may exclude fabrication, sink cutouts, removal, or sealing; a quote above $100 per square foot should identify the premium material or extra work behind the charge.
Assumptions: U.S. mid-market pricing, standard 3-cm granite, typical access, basic finished edges, and no structural or cabinet repairs.
How slab, fabrication, and installation charges add up
Countertop proposals may combine work into one installed rate or list each charge separately. Comparing line items helps reveal whether a low price excludes essential tasks. The ranges below reflect common charges for a 30-square-foot kitchen, not a guaranteed national quote.
| Quote item | Typical rate | 30-sq-ft example | What it covers |
|---|---|---|---|
| Azul Platino slab material | $30-$65/sq ft | $900-$1,950 | Stone allocation, grade, and supplier pricing |
| Fabrication and edge work | $15-$30/sq ft | $450-$900 | Template, cutting, polishing, and standard edge |
| Installation labor | $10-$20/sq ft | $300-$600 | Delivery into place, leveling, and seam setting |
| Sink and cooktop cutouts | $150-$400 each | $150-$800 | Cutting and finishing openings, depending on type |
| Removal and disposal | $5-$15/sq ft | $150-$450 | Taking out and hauling away existing tops |
Not every project needs every charge. New construction may not require removal, while a replacement job often does. A shop may include one standard sink cutout in its base rate but charge separately for a cooktop opening, faucet holes, or a specialty edge. Ask whether the material amount is based on installed square footage or whole-slab purchase.
Request an itemized estimate that separates stone, fabrication, labor, cutouts, and removal. If labor is billed by time rather than included in a square-foot rate, a two-person crew working 5-8 hours at a combined $100-$180 per hour would add roughly $500-$1,440 before other charges.
Which slab grade, thickness, and layout change the quote?
Azul Platino is generally a gray granite with mineral speckling, but slab appearance and consistency differ. A supplier may charge more for a slab with a preferred pattern, fewer visible irregularities, or a particular selection grade. Viewing the actual slab matters because a small sample cannot show every variation across a full counter.
Thickness also affects the material and fabrication price. Standard 3-cm granite is commonly included in countertop estimates; 2-cm stone may cost less but may require a built-up edge or additional support. A laminated or mitered edge can add about $20-$50 per linear foot, depending on shop methods and corner details.
Square footage is not the only layout measure. A 25-square-foot counter with several corners, narrow strips, and cutouts can require more fabrication than a simple 30-square-foot rectangle. Seams may be needed when runs exceed slab dimensions, and matching pattern or minimizing seams can require more material and planning.
Small, intricate layouts can cost more per square foot than larger, simple runs. As a rough planning threshold, a single straight run under 10 feet is typically easier to fabricate than a kitchen with multiple runs, an island over 8 feet long, or more than three inside corners.
Edge selection is another measurable driver. A basic eased edge is often included, while ogee, full bullnose, or laminated profiles can add $10-$40 per linear foot. A 40-linear-foot perimeter with an upgraded profile could therefore add $400-$1,600, separate from any island waterfall panels.
How city and regional labor rates shift granite pricing
Installed pricing is often higher in major coastal metros and dense urban markets than in smaller inland communities. Compared with a mid-market national estimate, large coastal cities may run about 10%-25% higher because of labor, shop overhead, delivery, and parking constraints. Rural areas can be 5%-15% lower, although long delivery distances or fewer fabricators can offset the difference.
For a 30-square-foot standard kitchen, an inland suburban quote might fall around $1,650-$2,700, while a high-cost metro quote could reach $2,000-$3,600 for a similar scope. These are broad comparison ranges; metropolitan prices vary by neighborhood, contractor availability, and the supplier’s inventory.
Regional variation affects labor and logistics more than the stone’s basic characteristics. A local shop may have Azul Platino in stock, avoiding a special-order freight charge, while another market may need to source a slab from farther away. Delivery can add $100-$400 or more if the site is distant, difficult to access, or requires special handling.
Compare local quotes using the same square footage, slab thickness, edge, and cutout count. A lower total from a rural fabricator may not be comparable if it excludes delivery or removal, and a city quote may include services that another estimate lists separately.
How long fabrication and installation take
Countertop work usually involves a measurement appointment, shop fabrication, and on-site installation. After cabinets are ready, templating may take 1-2 hours; fabrication commonly takes 5-10 business days, while installation often takes 4-8 hours for a standard kitchen. Custom slab orders, busy seasons, or complicated layouts can extend the schedule.
Labor costs may be folded into the installed square-foot price, but standalone rates can range from $50-$90 per worker per hour. A typical installation crew has two or three people because granite is heavy and needs careful positioning. Island pieces and narrow stairways may require additional handling time or extra crew members.
Access affects the quote even when the stone dimensions remain unchanged. Long carries, upper-floor installations without a suitable elevator, tight turns, or restricted delivery windows can add $150-$600 or more. Ask whether the fabricator has included site measurement, delivery, final placement, and cleanup in the stated labor amount.
Confirm the schedule and access assumptions before approving the estimate. Cabinets should be secure and level before templating; changes after the template is made can require a new visit or recutting, often adding $100-$300 plus any replacement material.
Which added charges can raise an Azul Platino quote?
Removal of old countertops is often the largest extra line item, especially if the existing top is stone or attached to a backsplash. Basic laminate removal may cost $5-$10 per square foot, while heavier stone removal and disposal can reach $10-$20 per square foot. Plumbing disconnection and reconnection may be billed separately.
Sink-related work varies with the fixture. A standard undermount sink cutout and polish may cost $150-$400, while faucet holes can add $25-$75 each. Installing or reconnecting a sink can add $150-$500, excluding new plumbing parts. A cooktop cutout typically adds $150-$350, depending on the opening and finishing requirements.
Backsplashes, extra outlets, and cabinet corrections can add up quickly. A 4-inch granite backsplash may run $10-$25 per linear foot, while a full-height stone backsplash can cost $30-$80 per square foot installed. Cabinet leveling or reinforcement may add $200-$800 if the existing base is uneven or cannot safely support the stone.
Ask the contractor to identify exclusions rather than assuming the installed price is all-inclusive. Sealing is often included or costs about $0-$150 for a standard kitchen; confirm the product and whether a return visit is needed. Taxes, if applicable, and permit requirements for related electrical or plumbing work may also be outside the countertop quote.
Is Azul Platino cheaper than quartz or other granite?
Azul Platino usually sits in the middle of the granite price range, but local inventory determines its exact position. Standard granite options can cost $45-$90 per square foot installed, while premium or rare granite may reach $100-$200 per square foot. A commonly stocked Azul Platino slab may be less expensive than an unusual imported stone, but not necessarily cheaper than every basic granite.
Installed quartz commonly runs $60-$120 per square foot. It offers more consistent manufactured color, but the final quote depends on brand, pattern, thickness, and edge details. Marble often starts around $60-$120 per square foot installed and can cost more for premium selections; it also needs more careful upkeep because it is more susceptible to etching and staining.
Laminate is a lower-cost alternative at roughly $20-$50 per square foot installed, but it does not have the same stone surface or heat tolerance. A granite remnant can be useful for a small vanity or short counter, sometimes lowering material cost to $20-$45 per square foot before fabrication. Remnants are less practical for a large kitchen because color and dimensions are limited.
Compare the finished installed price, not just the slab price. A less expensive material can end up closer in total cost once its fabrication, cutouts, delivery, and installation are included. Ask for the same layout and edge specification across material quotes.
Three sample Azul Platino kitchen estimates
These examples show how dimensions and scope affect the total. They assume ordinary access and U.S. mid-market labor, but actual supplier prices and local rates vary. Totals include typical material, fabrication, and installation; listed extras are included only when stated.
| Project | Specs | Calculation | Estimated total |
|---|---|---|---|
| Compact galley | 22 sq ft, 3-cm slab, basic edge, one sink cutout | $68-$82/sq ft plus $200 cutout | $1,696-$2,004 |
| Standard kitchen | 30 sq ft, two runs, eased edge, sink and cooktop cutouts | $70-$88/sq ft plus $350-$650 cutouts | $2,450-$3,290 |
| Kitchen with island | 45 sq ft, island, upgraded edge, old top removal | $78-$100/sq ft plus $400-$900 extras | $3,910-$5,400 |
The compact example is less expensive because it uses less stone and has a simple perimeter. The island job costs more per square foot because it includes extra finishing and removal; its actual slab requirement may also exceed the installed area due to cutting waste. A waterfall end or full-height backsplash would increase the estimate further.
Check whether each sample or contractor quote includes the same work. A total can look lower if it excludes disposal, plumbing reconnection, or upgraded edge fabrication, even when the countertop itself is priced at a similar rate.
How to lower the granite bill without sacrificing the layout
Keep the layout simple where possible. Fewer corners, shorter seams, and standard eased edges reduce fabrication time. Avoiding a waterfall end or full-height backsplash can save hundreds to several thousand dollars, depending on dimensions and material use. If appearance matters more than a continuous pattern, ask whether a seam can be placed in a less visible location.
Ask suppliers about in-stock Azul Platino slabs, remnants for small projects, and current selection grades. Choosing a readily available slab may avoid special-order freight or waiting charges. A remnant can work well for a vanity, laundry counter, or small bar, but the available size should be checked against the template before relying on it.
Control work outside the stone scope. Have cabinets installed, stable, and level before templating, and confirm sink and cooktop models before the fabricator cuts openings. If the existing counter is easy to remove, ask whether separate removal is an option; however, avoid DIY removal if heavy stone, plumbing, or cabinet damage is a concern.
Compare at least three itemized estimates based on the same measurements and specifications. Verify the slab thickness, edge profile, number of cutouts, removal and disposal, delivery, sealing, and warranty. The cheapest quote is not necessarily the lowest final cost if any of those charges appear after approval.