Banham lock prices depend on the model, door preparation, and whether fitting is included; the brand’s published UK pricing may not translate directly to a U.S. purchase. As a planning estimate, imported lock hardware may run about $320-$900, while a complete U.S. supply-and-install job can reach $900-$2,000 or more after shipping, fitting, and compatibility work.
There is no single U.S. retail price list that covers every Banham model and installation. The ranges below are budget estimates, not a current manufacturer quote; exchange rates, import charges, and local labor can change the final bill.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Banham lock hardware | $320 | $575 | $900 | Model and seller affect price; shipping may be extra. |
| U.S. import and fitting | $900 | $1,350 | $2,000 | Assumes a compatible door and a locksmith familiar with the hardware. |
| Door modifications | $150 | $400 | $900 | May apply if the lock case, holes, or door edge need alteration. |
| Replacement keys or cylinder service | $50 | $125 | $300 | Depends on the lock type, service location, and key-control process. |
What a Banham lock costs for a U.S. door
For planning, imported Banham hardware alone is often estimated at $320-$900 per lock. A straightforward U.S. installation may bring the total to about $900-$1,500; a difficult retrofit, expedited import, or door alteration can push it toward $2,000 or higher. These figures are broad estimates because Banham is a UK brand and U.S. availability is limited compared with domestic lock brands.
UK listings and quotes may be stated in pounds and may include fitting only within a local service area. A rough conversion using £1 at about $1.25 is useful for an initial comparison, but the actual exchange rate and card or bank fees matter. A UK price also does not automatically include U.S. shipping, customs charges, or local installation.
Budget separately for hardware, international delivery, and a locksmith’s labor. A basic price comparison should identify the exact model, what comes in the box, whether keys are included, and whether the seller provides support for a U.S. installation.
Assumptions: One exterior door, one lock, standard access, no major door replacement, and no unusual customs or expedited-shipping charge.
How the lock, shipping, and fitting shape the quote
A U.S. quote can combine the lock itself with costs that are uncommon in an ordinary local replacement. The table shows typical planning allowances, not a Banham tariff. Confirm whether each amount is included before comparing quotes.
| Quote item | Typical U.S. range | What changes the charge | Billing basis |
|---|---|---|---|
| Lock hardware | $320-$900 | Model, finish, cylinder, seller, and availability. | Per lock |
| International delivery and handling | $50-$250 | Parcel size, insurance, speed, and origin. | Per shipment |
| Import duties and brokerage | $0-$200+ | Declared value, classification, carrier, and current rules. | Per shipment |
| Locksmith labor | $150-$450 | Travel, installation time, and specialist experience. | $75-$150 per hour |
| Door or frame modification | $150-$900 | Door material, lock-case dimensions, and repair scope. | Per job |
| Extra keys or cylinder work | $50-$300 | Key system, authorized supply, and service location. | Per key or service |
Some sellers charge a minimum service or consultation fee even if the lock cannot be installed. Ask whether the estimate includes a site visit, test fitting, adjustment, and return visit. A product-only quote may look inexpensive but exclude the labor needed to make a UK lock fit a U.S. door.
For labor, a useful estimate is hours worked multiplied by the locksmith’s hourly rate, plus any call-out fee. A routine fit may take 1-3 hours; unfamiliar hardware or door alterations can take longer.
Door thickness, lock case, and backset change compatibility
Fit is one of the most important cost variables. A mortice lock designed for a particular door edge, case depth, spindle position, and backset may not match a standard U.S. prep. If the existing cutout is unsuitable, the installer may need to enlarge or relocate it, repair abandoned openings, or reinforce the door. That can add roughly $150-$900, depending on the material and finish work.
Door construction also matters. A solid wood door is usually easier to modify cleanly than a thin metal or composite door with internal reinforcement. If a door is under 1 3/8 inches thick, has a narrow stile, or already contains multiple large cutouts, confirm measurements before ordering. A mismatch discovered after delivery can mean return shipping, restocking fees, and another installation appointment.
Security scope affects the estimate as well. A single deadlock is a different project from replacing a full multipoint locking system or upgrading a door and frame together. If the job involves more than one locking point, confirm whether the quoted price covers every component, cylinder, and adjustment—not just the central lock body.
Have a locksmith verify the door before importing hardware. Provide door thickness, edge dimensions, existing cutout measurements, material, and clear photographs; measurements in millimeters may help when comparing UK specifications.
UK prices and U.S. installed estimates are not interchangeable
A UK product listing can be a useful benchmark, but it is not the same as a delivered U.S. price. Currency conversion gives only a starting point. International shipping, insurance, brokerage, possible duties, and payment fees can add about $50-$250 or more, while local labor may be higher than the fitting charge shown in a UK service quote.
Regional locksmith rates also vary within the United States. In a major coastal city, specialist labor and travel may be 15%-35% above a lower-cost rural or small-city market. Remote locations can still cost more if the right locksmith must travel a long distance or make a second visit. These percentages are planning ranges rather than guaranteed regional premiums.
Before comparing a UK quote with a U.S. estimate, separate the hardware value from installation and confirm the quote’s currency and tax treatment. A price that includes UK VAT or local fitting may not include U.S. sales tax, customs charges, or installation. The seller should state the delivery terms and who handles customs paperwork.
Assumptions: The regional comparison uses similar labor scope and excludes major door repairs; actual local rates depend on travel and contractor availability.
Installation time depends on the existing door preparation
A locksmith may need about 1-3 hours for a straightforward installation when the lock dimensions suit the existing door. A retrofit involving a new mortice, reinforcement, alignment, or cosmetic repair can take 3-6 hours or require a return visit. At $75-$150 per hour, a longer installation can add $225-$900 in labor before materials or travel fees.
Scheduling can affect the bill. A standard appointment is generally less expensive than an emergency visit outside normal business hours. For imported hardware, the bigger delay is often confirming measurements and obtaining the correct model; ordering before those checks can leave the door unsecured or require temporary hardware.
Ask the installer to price the expected labor range and a not-to-exceed amount for extra cutting. The estimate should distinguish planned installation from optional repair work and explain how the locksmith will handle an unsuccessful fit.
Three Banham purchase scenarios show the likely totals
These examples illustrate how scope changes a U.S. budget. They are not official Banham quotes and assume ordinary access, no unusual tax treatment, and a locksmith willing to work with imported hardware.
| Scenario | Scope | Estimated total | Main assumption |
|---|---|---|---|
| Hardware-only order | One lock at $400-$700 plus $50-$200 delivery and handling. | $450-$900 | Buyer arranges installation separately; no major import charge. |
| Compatible wood door | One lock, 1-3 labor hours, and basic fitting. | $900-$1,500 | Existing door preparation is close to the lock’s dimensions. |
| Custom retrofit | One lock, 3-6 labor hours, and door or frame work. | $1,400-$2,500+ | Additional cutting, reinforcement, repair, or a second visit is needed. |
For example, a $550 lock with $125 shipping and $300 labor would total about $975 before taxes or any duty. If the installer then needs four hours of extra work at $100 per hour, the project reaches about $1,375 before repair materials. A written estimate should identify these possible additions.
Compare Banham with a local high-security lock before importing
A local high-security deadbolt or mortice lock may cost less overall because it is stocked domestically and fits common U.S. door preparations. A standard installed replacement can often fall around $200-$600, while a premium lock with upgraded cylinders or added reinforcement may run $400-$1,000. Those alternatives are not identical to a Banham product, so compare the specific security features and fit rather than price alone.
Keeping an existing lock may be the lower-cost option if the problem is limited to a worn cylinder, loose hardware, or an alignment issue. A repair or adjustment may cost about $100-$350, depending on parts and call-out charges. If the lock case is damaged, parts are unavailable, or the door no longer closes securely, replacement may be more practical.
When comparing options, ask about key control, replacement-key availability, warranty service in the United States, and who can service the lock later. A lower initial hardware price can be offset by difficult future servicing or another international shipment.
Lower the installed price by confirming scope before ordering
Measure the door and have a qualified locksmith check the lock specification before placing an overseas order. Confirm the case dimensions, backset, door thickness, handing, cylinder type, and required accessories. A small amount spent on a site assessment can prevent a costly return or a lock that cannot be fitted without substantial alteration.
Request itemized quotes from at least two installers and compare the same model and scope. Ask each to list labor hours, travel or call-out fees, delivery, import costs, any door work, and taxes separately. Verify whether the locksmith has installed that specific model or can review its technical dimensions in advance.
Consider whether a repair or a locally available equivalent meets the actual need. Avoid ordering spare cylinders, decorative hardware, or premium finish options until compatibility and service arrangements are confirmed. If several locks are being purchased, ask whether one consolidated shipment reduces delivery charges, while checking that every door requires the same model.
The most reliable savings come from avoiding an incompatible order and unplanned door work. Keep the final budget flexible for customs charges and site conditions, and get written approval before the installer performs work beyond the quoted scope.