An under-bed TV lift system typically costs $1,200-$4,000 installed, with an average project near $2,400 before the television. Screen size, lift capacity, bed clearance, custom mounting, and local labor rates account for most price differences.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Lift mechanism | $700 | $1,400 | $2,500 | Motorized unit, usually excluding TV |
| Installation | $250 | $650 | $1,400 | Higher for custom bed modifications |
| TV and mounting parts | $250 | $600 | $1,500 | Screen cost varies by size and model |
| Typical complete project | $1,200 | $2,400 | $4,000 | Standard residential setup, before major carpentry |
What an under-bed TV lift usually costs
A basic under-bed lift setup costs about $1,200-$2,000 total, while a midrange installation commonly lands at $2,000-$3,000. High-capacity systems, premium controls, larger TVs, or a bed that needs structural changes can push a project to $3,000-$4,000 or more. These estimates assume a standard residential bedroom and normal access to the bed frame.
The lift mechanism alone generally runs $700-$2,500. A compact model for a smaller screen may be near the low end; a sturdier powered system designed for a larger display or a custom travel path costs more. A television is not always included, so the quote should say whether the screen, brackets, wiring, and remote are part of the package.
For a typical 40- to 55-inch TV and a straightforward installation, budgeting about $2,000-$3,000 is a practical starting point. A TV lift intended to rise from the foot of a bed is not interchangeable with a ceiling or cabinet lift, and product prices should be compared by mounting orientation, capacity, and travel distance.
Assumptions: U.S. residential pricing, standard materials, one lift and one TV, ordinary access, and no extensive furniture rebuilding.
Which lift, wiring, and labor charges appear on a quote
Quotes may bundle the motor, controls, brackets, and installation, making two offers difficult to compare. Ask for line items and confirm the TV’s weight and dimensions fall within the lift manufacturer’s limits. A low equipment price may not include delivery, wiring, finish work, or a return visit to correct fit issues.
| Quote item | Typical price | What changes the charge | Common unit |
|---|---|---|---|
| Lift mechanism and controls | $700-$2,500 | Capacity, travel, motor, remote features | Per system |
| Mounting hardware and wiring | $75-$350 | Bracket type, cable length, concealment | Per setup |
| Installation labor | $250-$900 | Bed access, assembly, testing, crew time | $75-$150 per hour |
| Carpentry or frame changes | $200-$1,200 | Cutting, reinforcement, trim, finish repair | Per project |
| Delivery and disposal | $50-$250 | Distance, stairs, packaging removal | Per visit |
| Television | $250-$1,500 | Screen size, resolution, model | Per TV |
Installation labor often takes 3-6 hours for a compatible bed and a ready power outlet. More involved jobs may require 6-10 hours or separate carpentry and electrical visits. At $75-$150 per labor hour, labor is a meaningful portion of the final price, especially where the bed must be moved, disassembled, or reinforced.
Check whether the quote includes a stable mount, cable management, travel, testing, and cleanup—not just the motorized lift. If an electrician must add an outlet or relocate a circuit, that work is commonly quoted separately and can add roughly $150-$500, depending on wiring distance and wall access.
How TV size, bed clearance, and lift travel change the price
Screen size affects both the lift’s capacity and the space needed to store the television below the bed. A 32- to 43-inch TV may work with a compact lift, while a 55- to 65-inch screen is heavier and wider, often requiring a higher-capacity mechanism and more clearance. Confirm the model’s maximum TV weight, width, and thickness rather than choosing by diagonal screen measurement alone.
Vertical travel and the bed’s underside height are equally important. Measure from the floor to the lowest obstruction under the frame, then compare that space with the closed lift and TV assembly. A lift that needs an extra 2-4 inches of clearance may require raised bed legs, a different mounting location, or frame alterations. Such changes can add $150-$600 for simple adjustments and substantially more for custom work.
Power and cable routing can also change the estimate. A nearby outlet and an accessible route for HDMI and power cables keep the job simpler. Concealing cables through a finished bed frame or adding a longer cable run may add $75-$300. A TV that must connect to a soundbar, game console, or streaming device may need additional cable planning and accessible storage.
Capacity, closed height, and travel distance should be checked against actual measurements before buying the mechanism. If the bed has drawers, a center support, a low platform, or a heavy upholstered base, those features can block the lift path and increase labor even when the screen itself is within the stated weight limit.
How many installation hours does a bedroom lift take
A straightforward installation usually takes one technician 3-6 hours, including assembly, mounting, cable routing, and movement testing. A two-person crew may finish a heavy lift or awkward bed setup more safely in a similar elapsed time, though the labor charge can reflect both workers. Rates commonly fall around $75-$150 per hour per technician, with regional and company minimums affecting smaller jobs.
Custom installation can take 6-10 labor hours or more when the bed frame must be modified, the lift needs reinforcement, or wiring is difficult to access. The installer may need to remove a mattress, slats, drawers, or trim, then reassemble and test the furniture. A project involving carpentry and electrical work may be split across multiple appointments, adding trip charges or scheduling delays.
Before the appointment, clear access around the bed and identify the TV model, outlet location, and any connected equipment. Confirm whether the installer expects the bed to be empty or partially disassembled. Good preparation does not eliminate skilled work, but it can avoid billable time spent moving belongings or waiting for a usable work area.
Ask the installer to state the expected crew size, hours, and minimum service charge in writing. A low hourly rate can still produce a higher bill if the estimate omits a second worker, travel time, or a return visit for finishing work.
Why under-bed lift prices differ by U.S. region
Local labor and delivery conditions cause meaningful price variation. As a planning estimate, installed prices in lower-cost rural markets may be 5%-15% below the national middle range, while major metro areas can run 10%-25% higher. These are broad comparisons, not guaranteed regional price lists; equipment availability, contractor scheduling, and local furniture specialists matter as much as state boundaries.
For a project estimated at $2,400 in a typical market, a lower-cost area might quote roughly $2,040-$2,280, while an expensive metro could come in around $2,640-$3,000. High-rise delivery, limited parking, stairs, or a long distance from the installer’s service area can increase the quote further. Some companies use a minimum charge for a small installation rather than billing only for time on site.
Compare local offers using identical specifications: screen dimensions and weight, lift model, travel, bed modifications, wiring, delivery, and warranty. A quote that is $300 lower may exclude the TV mount or concealment work. A quote that includes those items can represent better value even when its headline total is higher.
Use regional percentages as a budget adjustment, then rely on itemized local quotes for the final decision. Requesting two or three bids from installers familiar with motorized furniture provides a more meaningful comparison than comparing an online mechanism price with a fully installed proposal.
When bed-frame changes and cable work add fees
Additional charges arise when the existing furniture does not provide a clear, strong lift path. Reinforcing a frame, trimming a panel, relocating a crossbar, or adapting a platform can add about $200-$1,200. A simple adjustment is near the lower end; custom finish carpentry or rebuilding a section of the bed can exceed that range.
Electrical work is another potential extra. Adding an outlet near the lift may cost roughly $150-$500 when access is uncomplicated, but fishing wiring through finished walls or working around masonry can cost more. Cable concealment, longer power leads, HDMI runs, or a small device shelf may add $75-$350, depending on materials and finish expectations.
Removal of an old mechanism, packaging disposal, or delivery to an upper floor can carry separate charges, often $50-$250. Ask whether the installer will protect flooring, move the bed, take away packaging, and restore furniture trim. If a quote excludes these tasks, clarify whether the homeowner or a separate contractor must handle them.
Have the installer inspect the bed and route before agreeing to a fixed price. Photos and measurements can help screen out poor-fit lift models, but unusual frames and hidden supports are easier to price accurately in person.
Three under-bed TV lift setups and their likely totals
These examples show how scope changes the total. Prices include typical U.S. labor and assume ordinary residential access, but exclude sales tax and unusually extensive electrical or furniture work.
| Setup | Equipment and TV | Labor and extras | Estimated total |
|---|---|---|---|
| Compact 40-inch setup | Lift $800-$1,100; TV $250-$450 | 3-4 hours at $75-$125 per hour; basic bracket | $1,300-$2,050 |
| Midrange 55-inch setup | Lift $1,200-$1,800; TV $400-$800 | 4-6 hours at $85-$140 per hour; cable routing | $2,000-$3,400 |
| Custom 65-inch setup | Heavy-duty lift $1,800-$2,500; TV $700-$1,500 | 6-10 hours, frame reinforcement, finish work | $3,300-$5,400 |
The compact example assumes an existing bed with enough clearance and a standard mount. The midrange project allows for a larger screen and some cable management but not extensive carpentry. The custom example reflects the additional capacity and labor that a wide, heavy screen and altered frame can require.
Use the closest setup as a starting range, then add only the work confirmed for the specific bed. If the TV is already owned, subtract its purchase allowance, but verify its dimensions and weight before ordering the lift.
How to lower the price without compromising lift safety
Control scope before shopping. Choose a screen that fits the available clearance and does not require a larger-capacity lift than necessary. Avoid paying for app controls, premium finishes, or automated features unless they solve a real use need. A standard remote-operated model may save $100-$400 compared with a feature-heavy system, depending on product and retailer.
Keep the bed structure intact when measurements allow. A lift that fits the existing frame can avoid $200-$1,200 in carpentry. Measure the closed assembly and map the lift path before buying; verify the installer’s clearances instead of assuming that a product labeled “under bed” will fit every platform or storage bed.
Compare quotes with the same scope and ask whether installation can be bundled with another planned furniture or electrical task. Bundling can reduce travel charges, though it does not always lower the total. Obtain a separate price for labor and equipment, check delivery and return policies, and confirm whether the warranty covers the motor, controls, and installation.
Timing is less predictable than scope, but flexible scheduling may help avoid rush fees of about $75-$250. Planning ahead also gives time to find a compatible model rather than buying a lift that later requires adapters or frame changes. Avoid choosing on the lowest mechanism price alone; a poorly matched lift can create added labor or safety concerns.
The most reliable savings usually come from selecting a correctly sized system and avoiding preventable frame modifications. Keep the manufacturer’s weight and installation requirements, and use a qualified installer if the bed needs structural changes or electrical work.