A Black and Decker miter saw typically costs about $80-$180 when available new, while used examples often sell for $35-$100. The final price depends on blade size, condition, included accessories, seller, and whether the saw is a discontinued model or a current listing.
Because Black+Decker miter saws are less common in many retailers than competing brands, buyers should compare the exact model number and included equipment rather than relying on the brand name alone.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Used saw | $35 | $65 | $100 | Working saw; condition and accessories affect price |
| New or old-stock saw | $80 | $125 | $180 | Availability and seller markup vary |
| Replacement blade | $15 | $25 | $45 | Common 7-1/4-inch or 10-inch blade, if compatible |
| Basic setup extras | $10 | $35 | $90 | May include clamps, stand, or dust collection items |
What a Black and Decker Miter Saw Usually Costs
For a basic corded Black+Decker miter saw, a practical budget is $80-$180 for a new or new-old-stock unit and $35-$100 for a used one. The middle of the used market is about $65; a complete, clean saw with a sharp blade may reach the upper end. Listings above $180 deserve comparison with newer saws from other brands.
Prices depend heavily on the specific model. Many Black+Decker miter saws encountered in resale listings are older, and model names, blade sizes, and available features differ. A simple saw may offer a fixed base and basic angle adjustment, while some versions include a laser guide or other convenience features. Verify the exact model number before comparing prices.
A reasonable target is roughly $100-$140 for a complete, working saw in good condition. This assumes a common corded model, standard residential use, no major damage, and no costly shipping. A listing with a stand or accessories can be worth more, but only if those items are useful and compatible.
Assumptions: U.S. retail or local resale pricing, standard condition, ordinary access to replacement blades, and no unusual shipping charge.
How the Saw, Blade, and Accessories Shape the Quote
The saw itself is the largest part of the purchase. For a used unit, inspect the motor, blade guard, base, fence, angle adjustment, and power cord. A low sticker price can become a poor deal if the saw needs a blade, repair, or missing safety parts.
| Cost component | Typical price | What changes the amount | Buying note |
|---|---|---|---|
| Saw body | $35-$100 used; $80-$180 new or old stock | Model, condition, availability | Compare model numbers, not just photos |
| Blade | $15-$45 | Diameter, tooth count, cut quality | Confirm diameter and arbor fit |
| Stand | $50-$150 | Portability, extension supports | Check compatibility and included hardware |
| Clamps and supports | $10-$45 | Quantity and type | Useful for long stock and repeat cuts |
| Shipping or local pickup | $0-$60 | Distance, package size, seller | Large boxes can erase a low online price |
A replacement blade is not automatically required, but it is a common expense on older tools. Look for a blade that matches the saw’s stated diameter and arbor specification; a blade of the wrong size or fit is not an acceptable substitute. A stand can add substantial cost, so include it only if the saw will be moved between job locations or used without a stable workbench.
Plan for $25-$70 beyond the saw price if a blade and basic supports are needed. More extensive accessories can push the total higher, particularly when a dedicated folding stand is added.
Blade Diameter, Cut Capacity, and Condition Change Value
Blade size is one of the most important comparison points. Black+Decker models may use different blade diameters, including 7-1/4-inch and 10-inch formats. A larger blade can handle a broader range of stock in some designs, but actual crosscut capacity depends on the saw’s fence, arm, and specifications. Check the manual or model label instead of assuming that blade diameter alone guarantees a particular cut.
For a 7-1/4-inch model, a used price around $35-$75 may make sense if it is complete and cuts accurately. A 10-inch model in sound condition may justify roughly $50-$100, depending on model, accessories, and local demand. These are buying ranges, not guaranteed resale values; a worn or incomplete saw can be worth less regardless of blade size.
Condition can outweigh nominal capacity. Inspect for a cracked base, bent fence, loose pivot, damaged cord, missing guard, or an angle scale that does not hold its setting. Ask the seller to demonstrate the motor running and the blade lowering smoothly. A saw that binds, sparks excessively, or has missing safety equipment should not be priced as ready to use.
Pay more for verified accuracy and completeness, not for an unconfirmed capacity claim. If the saw has no test demonstration, price in the risk of a replacement blade or repair, or choose another listing.
Should Buyers Choose a Used Saw or Pay for Old Stock?
Used local listings are usually the least expensive route, commonly $35-$100 before any blade or transport costs. Local pickup also lets the buyer inspect the tool. The tradeoff is uncertain wear, no meaningful return option in many private sales, and the possibility that a discontinued model has limited parts or documentation.
New-old-stock or remaining retail inventory can cost $80-$180. A boxed unit may provide a cleaner purchase and clearer return terms, but an old tool is not necessarily superior to a newer competing model. Check the seller’s return policy, warranty coverage, and whether the saw has been stored in dry conditions. Do not assume a manufacturer warranty applies to every marketplace or secondhand purchase.
For occasional trim work, a complete used saw can be economical if it passes a careful inspection. For frequent use, compare the total price with new saws from other brands that offer current support, readily available parts, and a warranty. If a Black+Decker listing approaches $180, its value depends on the exact model and what is included.
Compare the delivered, ready-to-cut price rather than the headline listing price. Add shipping, a compatible blade, and any required stand before deciding whether old stock is a bargain.
Three Example Budgets for Common Black+Decker Purchases
A basic used purchase might include a working 7-1/4-inch saw listed locally at $45 and a $25 replacement blade. The estimated total is $70, assuming the guard and fence are intact and pickup is free. This is a sensible budget only after the buyer confirms that the model suits the intended stock and cut angles.
A complete used 10-inch saw with a serviceable blade and a small accessory bundle might cost $85. Adding $15 for transport or a minor accessory brings the estimated total to $100. This example assumes a demonstration confirms normal operation and that no stand is needed.
An online old-stock saw priced at $135 may require a $30 blade and $25 shipping, bringing the purchase to about $190. That total is already above the common range for a basic saw, so the return policy and included features matter. A stand could add another $50-$150 if required.
| Purchase scenario | Saw price | Other costs | Estimated total |
|---|---|---|---|
| Local used 7-1/4-inch saw | $45 | $25 blade | $70 |
| Used 10-inch saw, complete | $85 | $15 transport or accessory | $100 |
| Online old stock | $135 | $30 blade plus $25 shipping | $190 |
These examples show why accessories and delivery can change the best-value choice. Actual quotes vary with model, condition, location, and seller terms.
Repair, Blade Replacement, and Setup Expenses to Check
A dull blade is generally a more manageable expense than a motor, switch, or structural repair. Replacement blades commonly cost $15-$45, depending on size and cutting purpose. Before ordering, confirm the required blade diameter, arbor size, and maximum rated speed. A high-tooth-count finish blade may cost more than a basic general-purpose blade.
Repair costs are difficult to predict because parts availability differs by model and age. A minor adjustment or cleaning may cost little if handled by an experienced owner, while a shop diagnosis or electrical repair can make an inexpensive used saw uneconomical. A paid diagnosis may run about $40-$90, with parts and labor extra, depending on the repair shop and region.
For professional service, local hourly rates commonly fall around $60-$120, although a shop may charge a minimum fee rather than bill by the hour. A one-hour repair at that rate can quickly exceed the value of a basic used saw. Request an estimate before authorizing work.
Do not buy a damaged saw without pricing the specific repair first. Missing guards, damaged cords, or cracked structural parts are safety concerns, not cosmetic defects, and should not be treated as low-cost do-it-yourself fixes.
When a Miter Saw Stand or Better Blade Is Worth Paying For
A stand can add approximately $50-$150, while basic supports and clamps may cost $10-$45. A folding stand is most useful when the saw must be transported or the work area lacks a stable bench. For occasional home cuts, a secure, level work surface may avoid the stand expense, provided the saw is properly supported and the setup is safe.
A better blade may improve cut quality for finish trim, but the saw must be compatible with it. Spending $25-$45 on an appropriate blade can be more useful than paying extra for a feature that does not address the actual task. Check the manual for permissible blade specifications and follow operating instructions.
If repeated cuts require accuracy, budget for a stable setup and careful calibration rather than assuming a laser or scale is perfectly aligned. A simple test cut on scrap wood can reveal whether the angle setting needs adjustment. Avoid making adjustments while the saw is connected to power.
Buy accessories to solve a defined setup problem, not simply because they are bundled. A bundle is only a value if each included item fits the model and reduces a cost the buyer would otherwise incur.
How to Lower the Price Without Buying an Unsafe Saw
Compare at least three listings using the same checklist: model number, blade diameter, included blade, safety guard, fence condition, return terms, and pickup or shipping charge. Local pickup can eliminate $20-$60 in delivery costs and allows an in-person inspection. Ask for a short operating demonstration and a photo of the model label.
Set a maximum ready-to-use budget before negotiating. For example, a $50 saw that needs a $35 blade and $20 in delivery costs $105, while a $75 complete local unit may be cheaper overall. Do not treat a missing guard or damaged cord as a bargaining opportunity if the tool cannot be used safely.
Skip upgrades that do not match the workload. A stand may be unnecessary for occasional cuts on a stable bench, and an expensive specialty blade may not be needed for rough construction cuts. Conversely, do not economize by using an incorrect blade or removing safety equipment.
The safest savings usually come from buying a complete local unit and avoiding unnecessary accessories. When a listing is priced near the top of the range, compare it with current alternatives and consider warranty, parts access, and return rights before paying extra.