Cabinets To Go kitchen cabinets commonly cost about $3,000-$8,000 for materials in a modest to mid-size kitchen, while a larger or upgraded project can exceed $12,000 before installation. The Cabinets To Go cost depends on cabinet quantity, door style, construction, accessories, delivery, and whether a contractor handles assembly and installation.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Cabinet materials | $2,000 | $5,500 | $12,000+ | Typical kitchen order; excludes installation |
| Installed cabinet project | $4,000 | $9,000 | $20,000+ | Cabinets and professional installation |
| Cabinet price per linear foot | $100 | $250 | $500+ | Rough planning rate; configuration affects comparison |
| Installation labor | $50 | $100 | $150+ | Per labor hour, where billed hourly |
What a Cabinets To Go kitchen typically costs
For a straightforward kitchen with roughly 20-30 linear feet of cabinets, a practical materials budget is $3,000-$8,000. A basic stock selection with standard wall and base cabinets may land near the lower end; more cabinets, upgraded finishes, taller units, and interior fittings raise the order total. Very small kitchens can come in below the typical range, while large layouts or premium specifications can exceed it.
Including installation, removal of old cabinets, and ordinary job preparation, many homeowners should plan on approximately $6,000-$15,000. Difficult access, uneven walls, plumbing or electrical changes, or countertop replacement are not necessarily included in a cabinet quote. Ask whether the estimate covers assembled cabinets, hardware, delivery, fillers, trim, and taxes.
A useful first budget is $3,000-$8,000 for cabinet materials or $6,000-$15,000 installed. These are planning ranges, not a guaranteed Cabinets To Go quote; product availability, local store pricing, layout, and contractor rates change the final figure.
Assumptions: 20-30 linear feet, standard kitchen layout, stock or semi-custom selections, ordinary access, and U.S. pricing before major remodeling work.
How cabinet boxes, installation, and delivery shape the quote
A cabinet order is priced by its specific combination of base cabinets, wall cabinets, tall units, finished panels, and accessories. The per-linear-foot figure is only a rough comparison because a wall run with several drawers or specialty units can cost more than a simple run of standard boxes.
| Quote component | Low | Average | High | Typical basis |
|---|---|---|---|---|
| Cabinet boxes and doors | $2,000 | $5,500 | $12,000+ | 20-30 linear ft; style and construction |
| Hardware and interior accessories | $100 | $500 | $1,500+ | Handles, pullouts, organizers |
| Delivery and handling | $100 | $300 | $700+ | Distance, order size, delivery terms |
| Installation labor | $1,200 | $3,000 | $6,000+ | Layout, assembly, leveling, trim |
| Removal and disposal | $300 | $800 | $1,500+ | Existing cabinets and local disposal |
Installation may be quoted as a fixed project price or by the hour. A typical crew may need 2-5 days for cabinet installation, depending on kitchen size, assembly needs, leveling, and trim details. For hourly work, a rough labor calculation is ; for example, 24-40 hours at $75-$125 per hour equals $1,800-$5,000 before separate removal or repair work.
Confirm whether the contractor is responsible for assembling flat-pack units, attaching fillers and panels, installing crown molding, and making final adjustments. Countertops are commonly quoted separately, and the cost of disconnecting or reconnecting sinks, appliances, and electrical fixtures may also fall outside cabinet labor.
Labor and scope exclusions can add several thousand dollars beyond the cabinet order. Compare estimates with the same cabinet count and the same list of included work.
Cabinet count, construction, and layout drive the final price
The most direct price driver is how many cabinets the plan requires. A compact kitchen with 15-20 linear feet of cabinets may need $2,000-$5,000 in materials, while a 30-40-foot layout can run $6,000-$14,000 or more. Islands, pantry towers, corner units, and extra drawer stacks add cost even when the wall footage changes little.
Door style, finish, and box construction also matter. Basic stock finishes generally cost less than upgraded colors, specialty door profiles, or more finished interiors. Ask the retailer to identify the exact series and specifications rather than comparing a general “cabinet” price. Two plans with the same linear footage may differ substantially in drawer count, finished ends, and decorative trim.
Cabinet height and ceiling conditions can change both material and labor totals. Standard-height wall cabinets are less involved than taller units extending close to a 9-foot ceiling, which may require additional cabinets, a stacked look, or extended trim. An out-of-level floor or walls that vary by more than about 1/2 inch across a run can require extra scribing and shimming.
Cabinet quantity, specialty storage, and installation conditions can move a quote more than the advertised starting price. A detailed room plan is more useful than a single per-foot estimate.
Which layout and finish choices increase a Cabinets To Go estimate?
Drawer bases, pullout waste bins, spice racks, tray dividers, and pantry organizers improve access but can add roughly $50-$500 or more per feature, depending on the product and number of units. A bank of drawers can also cost more than a basic door cabinet of similar width. List these items separately so the quote shows what is optional.
Finished panels, decorative end caps, toe kicks, light rails, and crown molding can add several hundred dollars to a kitchen order. They are easy to overlook when counting only cabinet boxes. If the cabinets are visible from an open living area, finished sides may be necessary on exposed ends; if an end is against a wall, a more economical treatment may be possible.
Changing the kitchen footprint adds costs beyond the cabinets themselves. Moving a sink, range, or refrigerator can require plumbing, electrical, flooring, or ventilation work. Such changes can add $500-$3,000 or more for limited trade work and much more when walls, circuits, or drainage need significant alterations. Keep the layout in place if the goal is a cabinet-focused refresh.
Specialty storage and visible finish details are controllable upgrades; utility relocations are a separate remodeling expense. Request a base quote and an itemized upgrade list before choosing options.
How regional labor rates change installed cabinet prices
Cabinet product prices can vary by store, promotion, freight, and availability, but installation rates often show clearer regional differences. As a planning estimate, labor in lower-cost Midwest and Southern markets may be about 10%-20% below the national planning range. Large coastal cities and high-cost metro areas can run 15%-35% above it, especially when parking, building access, or contractor demand complicates the job.
For example, a $3,000 installation quote in a moderate-cost market might correspond to roughly $2,400-$2,700 in a lower-cost area or $3,450-$4,050 in an expensive metro, before unusual site conditions. These percentages are broad comparisons, not fixed regional price lists. Local contractors may have minimum charges for small kitchens, and rural locations can face travel or delivery fees.
Compare local quotes using the same scope, not just the same cabinet brand. One installer may include assembly, removal, and trim while another prices only setting and fastening cabinet boxes. Ask for labor, disposal, and delivery as separate lines, and confirm whether sales tax or any building permit fee applies to the work being performed.
Labor location and quote scope can shift the installed total by hundreds or thousands of dollars. Two or three local written estimates help distinguish a regional rate difference from missing work.
When removal, delivery, and room repairs add charges
Taking out old cabinets typically costs $300-$1,500, depending on kitchen size, demolition difficulty, and disposal arrangements. Removing tile backsplash, repairing drywall, or handling cabinets that are glued or built around appliances can increase the fee. If the homeowner removes cabinets, confirm whether the installer expects a clean, level room and whether wall repairs must be finished first.
Delivery fees may range from about $100-$700 or more, with distance, order size, delivery method, and stairs affecting the charge. Check whether the delivery service brings products inside or leaves them at the curb. A missed delivery, restricted access, or a need to reschedule can create extra charges or delay labor.
After old cabinets come down, hidden damage may require carpentry or wall work. Budget roughly $200-$1,000 for limited patching or leveling, while water damage, mold remediation, or substantial subfloor repair can cost considerably more. Such work is difficult to price accurately until the area is exposed, so ask how change orders are documented and approved.
Removal and room preparation are separate line items, not automatic inclusions in a cabinet materials price. A site visit can reduce surprises, but concealed damage should remain a clearly described allowance rather than an assumed fixed price.
Three Cabinets To Go budgets for different kitchen sizes
A small galley kitchen with 16 linear feet, standard stock cabinets, basic hardware, and no island could cost $2,500-$4,500 for materials. Installation might add $1,500-$3,000, producing a rough total of $4,000-$7,500 before new countertops, plumbing changes, or extensive demolition. This scenario assumes ordinary access and no significant wall repairs.
A mid-size kitchen with 26 linear feet, several drawer bases, finished exposed ends, and a pantry cabinet might total $5,000-$8,000 for cabinets and accessories. Allow approximately $2,500-$4,500 for installation and $500-$1,000 for removal, yielding a broad project range of $8,000-$13,500. Higher-cost metro labor or upgraded finishes can raise the total.
A larger 38-foot kitchen with an island, tall pantry units, upgraded doors, and extensive trim may require $9,000-$15,000 or more in cabinet materials. Installation and preparation may add $4,000-$7,000, making a reasonable cabinet-focused budget $13,000-$22,000 before countertops and utility relocation. These examples illustrate scope, not guaranteed store quotes.
| Kitchen scenario | Cabinet scope | Materials | Labor and prep | Estimated total |
|---|---|---|---|---|
| Small galley | 16 linear ft, standard units | $2,500-$4,500 | $1,500-$3,000 | $4,000-$7,500 |
| Mid-size kitchen | 26 linear ft, pantry and drawers | $5,000-$8,000 | $3,000-$5,500 | $8,000-$13,500 |
| Large kitchen | 38 linear ft, island and upgrades | $9,000-$15,000+ | $4,000-$7,000 | $13,000-$22,000+ |
Assumptions: Standard installation, average access, no countertop replacement, and no major plumbing or electrical relocation.
How to lower the cabinet bill without cutting useful storage
Keep appliances, sink, and major cabinet runs in their current positions when possible. Preserving the layout avoids costly plumbing, electrical, flooring, and countertop changes. Before ordering, measure carefully and have the plan checked against appliance dimensions, door swings, and clearances; ordering the wrong width can lead to replacement parts, delays, or extra labor.
Prioritize storage features by how often they will be used. A few drawer bases or one useful pullout can be more valuable than adding organizers to every cabinet. Compare standard sizes and finishes with special-order choices, and ask whether a less expensive cabinet configuration can achieve the same storage capacity.
Prepare the room only when the installer confirms the required condition. Homeowners who safely handle cabinet emptying, appliance clearing, or simple removal may avoid some labor, but demolition can expose wiring, plumbing, or wall damage. Do not assume a self-performed task saves money if it creates repair work or delays a scheduled crew.
Request at least two itemized installation bids and compare assembly, trim, disposal, delivery, and warranty terms. Ask the retailer or installer to separate required items from optional upgrades. A low materials quote may not be the lowest complete project price if it excludes panels or installation tasks another estimate includes.
The biggest savings usually come from keeping the layout, limiting optional accessories, and comparing equivalent written scopes. Avoid choosing solely by the lowest cabinet-box price when delivery, labor, and finish pieces are missing.
Questions that clarify a Cabinets To Go quote
Ask whether the quote is for cabinets only or includes assembly and installation. Confirm the number of boxes, dimensions, door and finish selections, finished panels, fillers, toe kicks, molding, and hardware. Request a drawing or itemized list so that any revised quote can be compared against the same layout.
Check how long the quoted price is valid and whether delivery, tax, or special-order fees are included. Ask what happens if a cabinet arrives damaged or a measured opening differs from the plan. Clarify the return and replacement terms for custom or special-order products before paying a deposit.
For installation, confirm the contractor’s license or insurance requirements where applicable, start date, expected duration, cleanup, removal, and payment schedule. Ask who handles countertop measurement and whether the cabinets must be installed before that measurement. If the countertop is excluded, include its separate quote when comparing the full renovation budget.
A complete estimate identifies products, quantities, labor, exclusions, and change-order terms. With those details, a homeowner can distinguish a genuine price difference from a quote that simply covers less work.