Caesarstone London Grey typically costs about $70-$120 per square foot installed in the United States, with a common kitchen project landing around $2,800-$6,000. The final quote depends on current product availability, countertop area, edge details, cutouts, removal, and local fabrication and installation rates.
Prices below are planning ranges, not a guaranteed quote: London Grey may not be stocked or offered by every dealer, and slab pricing can vary by market and inventory.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Installed countertop | $70 per sq ft | $95 per sq ft | $120 per sq ft | Standard fabrication and installation |
| Material only | $45 per sq ft | $65 per sq ft | $85 per sq ft | Dealer pricing and availability vary |
| Typical 30-sq-ft kitchen | $2,100 | $2,850 | $3,600 | Basic layout, before optional work |
| Removal of old counters | $300 | $600 | $1,000 | More for difficult access or heavy material |
What London Grey quartz costs for a kitchen countertop
A practical installed budget is $70-$120 per square foot, or roughly $2,800-$6,000 for 40-50 square feet. The lower end generally assumes a straightforward layout, standard eased edges, ordinary access, and a fabricator with access to competitively priced slabs. The high end is more likely with premium local labor rates, additional seams, a thicker visual edge, or multiple cutouts.
For a smaller 30-square-foot kitchen, the installed total is commonly $2,100-$3,600 before removal, plumbing work, or special upgrades. Many fabricators also set a minimum project charge, so a small vanity or kitchenette may cost more per square foot than a full kitchen.
Material-only quotes often fall near $45-$85 per square foot, but they do not necessarily include templating, fabrication, sink cutouts, delivery, or installation. Ask whether the quote is for a slab, a fabricated countertop, or a completed installation. Assumptions: U.S. standard kitchen, approximately 30-50 square feet, ordinary access, and no structural or cabinet repairs.
How slab, fabrication, and installation shape the quote
The slab is only one part of a finished countertop price; fabrication and installation can account for a substantial share of the total. The estimates below show typical quote components. Actual invoices may bundle labor, delivery, and equipment into a single installed rate.
| Quote component | Typical price | What it covers | Common price trigger |
|---|---|---|---|
| London Grey material | $45-$85 per sq ft | Quartz slab allocation | Dealer stock, slab grade, and usable yield |
| Templating and fabrication | $15-$35 per sq ft | Measuring, cutting, polishing, and edge work | Complex shapes or extra seams |
| Installation labor | $10-$25 per sq ft | Transport, placement, leveling, and joining | Stairs, tight access, or distant job sites |
| Sink and cooktop cutouts | $150-$450 each | Cutting and finishing openings | Number, size, and cutout type |
| Delivery and disposal | $150-$700 total | Local delivery and old-counter removal | Distance, weight, and demolition scope |
Some fabricators price quartz by the square foot; others quote by slab and layout. A slab-based quote can include material that becomes waste, especially when the pattern or dimensions make remnants difficult to reuse. Confirm whether the price includes tax, backsplash, sink cutouts, faucet holes, and the finished edge profile.
When labor is itemized, a rough labor calculation may use . A two-person crew might spend 4-8 hours on site for a straightforward kitchen installation, but fabrication is typically completed separately at the shop.
Why slab size, cutouts, and edge profiles change the price
Layout complexity and material yield can move a London Grey quote more than a modest change in countertop area. A 25-square-foot run with several corners, a peninsula, and three cutouts may require more shop time than a simple 30-square-foot straight layout. The fabricator must also plan cuts around slab dimensions and pattern appearance.
For a basic kitchen, one or two sink or cooktop openings may add about $150-$450 each. A large farmhouse sink, unusual cooktop, or extra faucet holes can require added work or reinforcement. A waterfall end, where the counter material continues down the cabinet side, may add approximately $800-$2,000 per side, depending on height, seam placement, and material use.
Standard eased or straight edges are often included or priced modestly. Decorative profiles may add roughly $10-$30 per linear foot. A built-up edge that creates a thicker appearance can cost more because it uses extra material and labor. Long unsupported overhangs may need steel supports, commonly adding $150-$500 or more, depending on span and installation conditions.
Project size also affects the rate. Jobs under 20 square feet may face minimum charges, while a larger kitchen can spread templating and delivery fees over more area. A layout above roughly 55-65 square feet may require careful slab planning or additional material, particularly if the kitchen has long islands or matching backsplash pieces.
How London Grey quotes differ across U.S. markets
Regional labor and delivery commonly create a 10%-30% difference between otherwise similar countertop quotes. Major coastal metros and high-cost urban areas may price installed quartz about 15%-30% above a national midrange estimate. Smaller cities and rural markets can be 5%-15% lower when local fabrication is available, but a long delivery route can erase that difference.
For a 40-square-foot kitchen that might cost $3,200-$4,400 in a mid-priced market, a high-cost metro quote could reach approximately $3,700-$5,700. A lower-cost market might land near $2,800-$4,100, assuming the same layout and finish. These comparisons are directional; local labor supply, shop minimums, and dealer inventory matter more than state borders alone.
Transportation is especially relevant if London Grey is not held locally. A fabricator may need to source a slab from a regional warehouse, and special handling or long-distance delivery can add several hundred dollars. Ask whether the quote includes freight and whether the price assumes a specific slab is reserved.
Three realistic London Grey countertop quote examples
Comparing quotes is easier when each estimate states the same square footage, edge, cutouts, removal, and tax treatment. The examples below use common U.S. project conditions and illustrate how scope changes the total.
| Project | Scope and labor | Estimated total |
|---|---|---|
| Small galley kitchen | 28 sq ft at $88 per sq ft; one sink cutout; 5-6 crew hours | $2,700-$3,100 |
| Typical kitchen with island | 42 sq ft at $98 per sq ft; sink and cooktop cutouts; 6-8 crew hours | $4,000-$4,700 |
| Large kitchen with waterfall end | 58 sq ft at $105 per sq ft; two cutouts, one waterfall, removal; 8-10 crew hours | $7,000-$8,800 |
The first example assumes a simple layout and excludes old-counter removal. The second includes a typical island but no decorative edge. The larger project includes a substantial added feature, so its total is not a direct per-square-foot comparison with a basic installation. Sales tax and cabinet repairs are excluded from all three examples.
Which extra charges can appear after measuring
Removal, access, and cabinet preparation are frequent reasons a final invoice exceeds an early per-square-foot estimate. Existing laminate removal may cost about $5-$15 per linear foot; heavy stone demolition can run $10-$25 per square foot or more when disposal and difficult access are involved. Plumbing disconnection and reconnection are commonly separate charges, often around $150-$400.
Templating may be included in a full installation, but a separate visit or a remade template can add roughly $100-$300. Delivery may be a flat $150-$500 for a local job and more for a distant site. Narrow stairs, elevator restrictions, long carries, or a required lift can add $100-$600 or more, depending on the crew and equipment.
Cabinets must be level and sturdy enough to support the countertop. Minor shimming may be included, while cabinet reinforcement or repair can add $200-$1,000 or more. If the existing backsplash is tile, its removal can create wall repairs that are outside the countertop contract. Request a written list of exclusions before approving the job.
How London Grey compares with repair and other quartz options
Replacing the full counter is not always the least expensive response to damage, and another quartz color may have better local availability. A professional repair for a small chip or seam issue may cost about $200-$600, while larger repairs can reach $700-$1,200. Repair can preserve the existing surface, though color and pattern matching may be imperfect.
For replacement, a more readily stocked quartz color may cost $5-$15 less per square foot in some markets, potentially saving $200-$750 on a 50-square-foot kitchen. This is not guaranteed: dealer discounts and slab availability can make London Grey competitive. Ask the fabricator to price the requested color alongside two comparable in-stock options, using the same edge and installation scope.
Laminate can be a lower-cost alternative, often around $25-$60 per square foot installed, while natural stone varies widely and may need sealing or more maintenance. These materials do not reproduce the same appearance or performance characteristics, so the comparison should include care needs, seam visibility, heat exposure, and expected replacement timing rather than purchase price alone.
Ways to lower a London Grey countertop estimate
The most controllable savings usually come from simplifying the layout and comparing complete, like-for-like bids. Keep the existing sink location when practical, choose a standard edge, and avoid adding waterfall sides or full-height backsplash unless those details are important to the project. A simpler plan can reduce cutting time, seams, and material waste.
Measure the approximate countertop area before requesting quotes, then have at least three local fabricators price the same plan. Ask each company to state the material rate, cutout fees, edge profile, delivery, removal, tax, and warranty separately. Verify whether a quote includes one slab or a full slab charge; the cheapest per-square-foot number may not produce the lowest total.
If the cabinets are in good condition, removing old counters separately may save money, but only when the fabricator allows it and the work will not damage the cabinets or walls. Avoid buying material before a professional template confirms dimensions and slab yield. If London Grey is available as a remnant for a small vanity, the material cost may be lower, but fabrication and minimum labor charges still apply.
Scheduling several countertop tasks together, such as a kitchen and bathroom vanity, may reduce separate delivery or minimum charges. It is also sensible to compare standard and premium edge prices before committing. A modest design adjustment that avoids an extra slab or a complicated seam can save more than negotiating a small discount on the base material rate.