Cambria Lakedale quartz countertops typically cost about $90-$160 per square foot installed, with a common kitchen project running $3,600-$8,000. The final price depends on countertop area, fabrication details, edge style, removal, and local installer rates; Cambria pricing is generally quoted through authorized dealers and fabricators rather than as one fixed national price.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Installed Lakedale countertop | $90 per sq ft | $125 per sq ft | $160 per sq ft | Material, standard fabrication, and installation |
| Typical 40-sq-ft kitchen | $3,600 | $5,000 | $6,400 | Before major removal or plumbing changes |
| Material allowance | $55 per sq ft | $80 per sq ft | $110 per sq ft | Dealer and slab pricing vary |
| Fabrication and installation labor | $30 per sq ft | $45 per sq ft | $65 per sq ft | Access and cutout count affect labor |
What Lakedale countertops cost in a standard kitchen
For budgeting, expect roughly $3,600-$6,400 for 40 square feet of Cambria Lakedale with a straightforward layout and standard eased edge. A larger 55-square-foot kitchen commonly falls near $4,950-$8,800. Complex layouts, premium edge details, or work in a high-cost metro can push a quote above these ranges.
A practical installed planning range is $90-$160 per square foot. That estimate generally includes the quartz, templating, ordinary fabrication, delivery, and setting the countertop. It assumes standard thickness, normal access, and no extensive cabinet correction. Ask each fabricator whether the price includes the sink cutout, faucet holes, tax, and installation-day support.
Lakedale is a specific Cambria design, but its price is not necessarily identical at every dealer. Slab availability, the amount of material required, and the fabricator’s agreement with the supplier can change the material allowance. Quotes should identify the design by name and show the measured area rather than relying on a generic “Cambria quartz” estimate.
Assumptions: U.S. pricing in dollars, standard residential kitchen, typical access, and no cabinet replacement.
How slab, fabrication, and labor shape the quote
A countertop estimate separates the slab allowance from the work needed to turn it into a finished surface. The table gives typical ranges for a basic kitchen project; individual quotes may combine several items into one installed rate. Confirm whether the measurements represent countertop area or slab area, since a fabricator may need extra material for seams, pattern placement, or unusable remnants.
| Quote component | Low | Average | High | What changes the charge |
|---|---|---|---|---|
| Lakedale material | $55 per sq ft | $80 per sq ft | $110 per sq ft | Dealer price, slab yield, and availability |
| Templating and fabrication | $15 per sq ft | $25 per sq ft | $40 per sq ft | Cutouts, seams, edge profile, and layout |
| Installation labor | $15 per sq ft | $25 per sq ft | $40 per sq ft | Carry distance, stairs, crew, and fit |
| Delivery and handling | $100 per job | $250 per job | $500 per job | Distance, access, and slab handling |
| Removal and disposal | $5 per sq ft | $12 per sq ft | $25 per sq ft | Old surface, backsplash, and disposal rules |
The slab is only one part of the installed price. A quote can show an attractive material rate but add fabrication, delivery, installation, removal, and tax separately. Compare the complete scope and ask whether the fabricator charges a minimum job fee, which is especially relevant for a small vanity or a short countertop run.
Labor may be priced by square foot or bundled into the project. When billed by time, a common planning rate is about $50-$100 per installer hour, often with a two-person crew for handling and setting heavy pieces. A simple 40-square-foot kitchen might require several hours on site, while templating and shop fabrication occur on separate visits.
Which Lakedale layout and edge details raise the price
Square footage matters, but the usable slab yield can matter just as much. A 40-square-foot countertop with long, uncomplicated runs may use material efficiently; the same area divided into several sections can require more cuts and create more waste. If the layout needs a visible seam, the fabricator may also spend additional time aligning the design and finishing the joint.
Cutouts and edge work are common reasons a quote exceeds a basic per-square-foot estimate. A standard sink opening may be included, but a second sink, cooktop cutout, or unusually shaped opening can add about $150-$500 each, depending on the cut and finishing. A simple eased edge is often included; decorative profiles can add roughly $10-$30 per linear foot.
Thickness and overhangs also affect fabrication. A standard 3-centimeter top is a common residential choice, while a different thickness, built-up edge, or extended island overhang can require extra material and reinforcement. An overhang beyond about 10-12 inches may need brackets or other support, commonly adding $150-$600 depending on span and installation conditions.
Access can change the labor estimate even when the countertop dimensions stay the same. Narrow stairways, elevators, long carries from the truck, or restricted parking may require a larger crew or special handling. For an island with a large one-piece top, confirm whether the slab can be transported and maneuvered safely before approving the layout.
Where a Cambria Lakedale installation can save money
Material and labor prices vary by market. In lower-cost parts of the Midwest and South, a straightforward installation may land near the lower end of the range; major coastal metros and high-cost urban areas can run about 10%-25% higher. Rural addresses may have lower labor rates but higher delivery charges or fewer nearby fabricators, so the net quote can still be elevated.
Compare complete local bids rather than applying a national average to the slab alone. Request quotes from at least two qualified fabricators that specify Lakedale, measured area, edge, cutouts, removal, and installation. A bid that is $500-$1,000 lower may reflect a different material allowance or excluded services, not necessarily a better price for the same finished job.
Ask whether the project can use a remnant for a small vanity, laundry counter, or short backsplash return. A suitable remnant may reduce material expense by $10-$40 per square foot compared with buying material allocated from a full slab, though availability and pattern matching are not guaranteed. For a full kitchen, remnants rarely replace the main slab requirement.
Keep the layout efficient by limiting unnecessary seams and avoiding elaborate edge profiles where they do not improve function. Having cabinets level and cleared before installation can prevent delays, although the installer should verify readiness rather than assume the cabinets are suitable. Do not remove an old countertop yourself unless the fabricator approves; damage to cabinets or walls can cost more to correct than professional removal.
Three kitchen quotes for different Lakedale countertop sizes
The examples below use installed rates to illustrate likely totals, not guaranteed dealer quotes. They assume standard Cambria Lakedale material, ordinary access, one standard sink cutout, and no unusual cabinet work. Local prices, slab yield, and inclusions can produce different estimates.
| Project scenario | Area and rate | Added work | Estimated total |
|---|---|---|---|
| Small galley kitchen | 30 sq ft at $105-$135 | $250-$600 for removal and handling | $3,400-$4,650 |
| Typical L-shaped kitchen | 40 sq ft at $110-$145 | $350-$800 for removal and extra cutout work | $4,750-$6,600 |
| Large kitchen with island | 60 sq ft at $125-$160 | $700-$1,500 for island handling and detailed edges | $8,200-$11,100 |
The measured area and extras explain why two kitchens of similar size can have different totals. The small galley example assumes short, direct runs. The L-shaped project includes more corners, while the island scenario allows for more material and harder handling. If the island needs a seam, special support, or a waterfall side, the total may exceed the example range.
For a transparent comparison, ask each fabricator to show the square footage, price per square foot, and separate charges for the sink, cooktop, edge, removal, and delivery. Check whether the total includes sales tax and whether a deposit, balance due at installation, or measurement fee applies. A written template and final measurement should settle the amount before fabrication begins.
Removal, backsplash, and other Lakedale add-on charges
Replacing an existing surface can add meaningful costs beyond the new quartz. Removing laminate may be straightforward, while tile or stone can take longer and may damage the wall or cabinets during demolition. Typical removal and disposal runs about $5-$25 per square foot, with the upper end more likely for heavy material, difficult access, or substantial cleanup.
Separate demolition and plumbing work from the countertop allowance. Disconnecting and reconnecting a sink or faucet may cost about $150-$450 when handled by a plumber, depending on the fixtures and local rates. Replacing a sink or faucet adds the fixture price; modifying plumbing lines can add several hundred dollars or more.
A quartz backsplash can be priced by area or by linear foot, and the result depends on height and cutouts. A short 4-inch backsplash may add about $15-$35 per linear foot when made with the countertop material, while a full-height panel can add roughly $40-$100 per square foot for material and fabrication. Wall irregularities, outlets, and corner details can increase installation time.
Other possible line items include a special edge, extra faucet holes, a soap dispenser opening, cabinet leveling, support brackets, or a minimum fabrication charge. Ask whether the installer will seal joints and clean the surface at completion. Cambria quartz is generally low-maintenance and does not require routine sealing, but care and warranty terms should be checked against the manufacturer’s current documentation.
How long Lakedale templating and installation take
The on-site installation is usually completed in one day for a standard kitchen, but the full process takes longer. After cabinets are ready, a fabricator typically visits to make a template, then cuts and finishes the slabs in the shop before scheduling delivery and installation. A straightforward project commonly takes about 1-3 weeks from final template to installation, though production queues and slab availability can extend the schedule.
Installation labor is often a small part of the calendar time but a significant part of the service cost. A basic kitchen may take a two- or three-person crew around 3-6 hours on site. A large island, multiple seams, difficult stairs, or an occupied home requiring extra protection can extend the visit to 6-10 hours or require a second trip.
Some fabricators charge a templating or measurement fee of about $100-$300, which may be credited toward the project if the order proceeds. Confirm whether the quote includes that visit and what happens if the cabinets are not level or ready. Changing the layout after templating can require a new measurement and may add fabrication charges or delay installation.
When a Lakedale upgrade is worth its added price
For a lower initial budget, laminate or entry-level solid surface may cost less than premium quartz, while natural stone can fall below or above Cambria depending on the selected slab and fabrication. Typical installed alternatives often range from about $25-$60 per square foot for laminate, $55-$100 for many solid-surface options, and $70-$150 for granite. These broad ranges vary by material grade and market, so compare a specific design and full installation scope.
Choose the surface based on the finished appearance and upkeep, not on a material-only price. Lakedale’s quote buys a particular Cambria look and a nonporous engineered surface, but a less expensive countertop may meet the same practical needs. Quartz generally avoids routine sealing, whereas some natural stones may need periodic sealing; maintenance costs differ by product and care instructions.
Repair is a limited substitute for replacement when damage is small. A professional may charge about $200-$600 to address a localized chip or seam issue, depending on access, color match, and finish. A cracked slab, widespread damage, or a layout change may make replacement more practical, but a repair assessment can establish whether the existing countertop is salvageable before committing to a new installation.
Warranty coverage is another point to price correctly. Ask who handles installation-related issues and what the manufacturer’s warranty requires, including proof of purchase and care restrictions. A warranty does not necessarily cover accidental damage, improper support, or problems caused by installation, so it should not be treated as a substitute for a detailed written scope.